Your Search: "sram axs"

From the start, 3T's goal for the Strada was the best aerodynamics AND comfort. Because without comfort, you won’t be able to maintain your aero position. While pushing the limits of aerodynamics and comfort in every detail, the Strada has two clearly distinct zones: Speed zone: the front half of the bike, with its ultra-deep yet narrow headtube, wrap-around downtube and bladed fork. Comfort zone: the curved seattube, slender seatstays and long exposed seatpost provide the ultimate comfort while also helping aerodynamics Tires provide more compliance than any other part of the bike. Wider tires are better at reducing shocks from cracks, curbs, cobbles and potholes, They even have lower rolling resistance, because their shorter contact patch requires less bending by the casing. In addition, wider tires reduce fatigue caused by high-frequency road buzz. But aerodynamics are also important on such rides, and the Strada remains the first aero bike engineered around wider tires (just like the Discus wheel range is engineered specifically around wider tires). Finally you can be fast and comfortable all day, every day, with one and the same bike. Frame - 3T Strada Integrale 2X (FD hanger is part of the frame) Frame material - Unidirectional pre-preg carbon, High-modulus/high-strength performance blend layup Fork - 3T Fundi Integrale Headset - 3T MinMax Integrale IS42/34 | IS47/38(36deg) Thru-axle - 100x12 front - 142x12 rear Handlebar - 3T Superergo Integrale LTD (XXS: 38cm - 51: 40cm - 54&56: 42cm - 58: 44cm) Stem - 3T Apto Integrale Stealth (XXS: 80mm - 51: 90mm - 54:100mm - 56: 110mm - 58: 120mm) Front Derailleur - Sram Rival AXS Rear Derailleur - Sram RIval AXS max 36T Shift/brake levers - Sram Rival AXS Brakes - Sram Rival AXS Hydraulic Disc w/ Sram 160mm rotor Crankset - Sram Rival AXS, 46-33T, narrow Q-factor (XXS: 165mm - 51: 170mm - 54&56: 172,5mm - 58&61: 175mm) Cassette - 12-speed Rival AXS 10-36T Wheelset - Fulcrum Rapid Red 900, 700c, 22mm internal width, tubeless ready (upgrade to 3T Discus 45|32 LTD possible) Tires - Pirelli PZero Road 700c Seatpost - Strada Seatpost for Ritchey Clamp Saddle - Selle Italia Model X Superflow

Machined in San Diego, CA, these round chainrings are made of 7075 aluminum SRAM 8-bolt Direct Mount fitment Works with both SRAM and Shimano 12 speed chains Weight: 58g

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec II brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers with Shimano brakes. Our BikeYoke I-Spec II adapters are available as "left" or "right" for Shimano brake levers but you can also flip sides if you prefer a more inward or outward remote position: Compatible brakes: - Deore BL-M6000 - Deore BL-501 - SLX BL-M7000 - XT BL-M8000/8020 - XTR BL-M 9000/9020 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec B brake and saves an extra clamp on the handlebars. They can also be used to mate SRAM triggers or other remotes with Shimano brakes. Left and right + flip-flop compatible. Compatible brakes: - SLX BL-M675-B - XT BL-M785-B - Zee BL-M640-B - Saint BL-M820-B Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapters are available as "left" or "right" side for Shimano brake levers and you can also flip sides if you prefer a certain more inward or outward remote position: Compatible brakes: - Deore BL-M6100/6120 - SLX BL-M7100/7120 - XT BL-M8100/8120 - XTR BL-M9100/9120 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

For easy connection and disconnection of Ceramicspeed chains.

CeramicSpeed UFO Chain - KMC 12-Speed, 126 Links, Silver Pre-treated chain with coating optimized for 600km of use, after which it can be used as a normal chain. This chain has been optimized for all 12-speed drivetrains and is compatible with all 12 speed group sets, including SRAM Red and Force AXS pre-treated with CeramicSpeed's UFO coating Specifications: Links (links): 126 Color: Silver Chain Connection Type: Reusable Master Link Half Link Chain: No Drivetrain Speeds: 12

From the world's fastest chain coating to the most capable range of greases to race-winning chains, Ceramicspeed's UFO product group offers the best solution for keeping your drivetrain and bearings optimized and protected.

The 12-tooth narrow-wide design provides exceptional shift performance. The narrow-wide design delivers precise engagement of the chain, both on and off the pulley wheels. This product is designed, developed and hand-built in Denmark and offers improved chain friction performance and increased longevity.

The 12-tooth narrow-wide design provides exceptional shift performance. The narrow-wide design delivers precise engagement of the chain, both on and off the pulley wheels. This product is designed, developed and hand-built in Denmark and offers improved chain friction performance and increased longevity.

SRAM's 1x Eagle component system boasts a twelve-speed cassette. We built pulleys that can handle the load better than stock. These CeramicSpeed Pulley Wheels work with less drag, adding to the power transmitted to the rear wheel while offering greater durability, going longer between replacement intervals. These pulleys are also fully compatible with the SRAM Eagle AXS derailleur. The aluminum pulleys with standard bearings are 34.4% more efficient than stock and use our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The upper and lower pulleys both have a narrow-wide tooth design with 14 teeth each. As the upper and lower pulleys have different tasks, they have different shapes. You'll find they are thus marked, and have directional arrows. These pulleys should be installed with stock SRAM pulley spacers. Save those from your old pulleys before installing CeramicSpeed. The kits come with CeramicSpeed Oil in a 15ml dropper bottle and grease in 5ml syringe. The bearings come pre-oiled. The grease can be used on the pulley bearings when riding in particularly harsh environments. In the box: - 2 x 14-tooth pulley wheels - CeramicSpeed Bearing Oil in 15ml dropper bottle - CeramicSpeed Grease in 5ml syringe - Sticker sheet

The CeramicSpeed Pulley Wheels for SRAM AXS 12-Speed offers a unique symmetrical 14-tooth narrow-wide design that provides exceptional shift performance. The 12-tooth narrow-wide design provides exceptional shift performance. The narrow-wide design delivers precise engagement of the chain, both on and off the pulley wheels. This product is designed, developed and hand-built in Denmark and offers improved chain friction performance and increased longevity. In the box: Two 12-tooth pulley wheels Alloy Spacer Kit CeramicSpeed Bearing Oil, 15ml. bottle Sticker Sheet

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. Pulley Wheel Material: Aluminium The handbuilt OSPW System has two spring tension settings, that allows customised setup based on riding conditions. Pulley Wheels: CeramicSpeed 15-tooth upper and 19-tooth lower In the box: - Complete OSPW System for SRAM Red/Force AXS - CeramicSpeed Pulley Oil, 15 ml. dropper bottle - Custom tool for removal of stock cage and securing of OSPW System

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting for maximum efficiency. The handbuilt OSPW System has two spring tension settings that offer you customized setup based on riding conditions. This OSPW System is also compatible with the 2020 11-speed SRAM Red eTap derailleurs featuring a clutch. - Pulley wheels: CeramicSpeed 15-tooth upper and 19-tooth lower - Pulley wheel material: aluminum - Cage material: carbon-reinforced PA - Bearing options: CeramicSpeed Standard or Coated - Compatibility: SRAM Red AXS and SRAM Force AXS. 2020 SRAM Red eTap 11-speed derailleur with the orbit clutch. This system is also compatible with the wider-range Force AXS medium cage derailleur - Cassette Compatibility: Fits 12-speed 10-36 tooth cassettes. Fits 11-32 tooth cassettes when used with an 11-speed clutched derailleur - Spring Tension Settings: 2-spring - Speeds: 12-speed - Discipline: Road and Gravel/Cross - Custom tool included for removal of stock cage and securing of OSPW. The factory clutch mechanism will remain intact. There is no damage or modification to the clutch for the installation of the OSPW System In the box: - Complete OSPW System for SRAM Red/Force AXS - CeramicSpeed Pulley Oil, 15 ml dropper bottle - Custom tool for removal of stock cage and securing of OSPW System

The OSPW X for SRAM Eagle AXS features a narrow wide tooth profile to ensure durable chain retention. The 14-tooth upper and 18-tooth lower pulleys reduce chain drag, while the custom-designed carbon fiber pulley cage ensures both durability and light weight. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/Oil: Pulley Oil - Compatibility: SRAM Eagle AXS (Electronic) - Compatibility Cassette: 10-52 tooth max - Spring Tension Settings: 3 - Speed: 12-speed - Discipline: Off-road and Gravity In the box: - A complete OSPW X System for SRAM Eagle AXS - CeramicSpeed Bearing Oil in a 15ml dropper bottle

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features a 14-tooth upper and 18-tooth lower, aluminum pulley wheels with Grade 3 Silicon Nitride balls to provide absolute optimization of the rear derailleur Robust cage crafted from polyamide and carbon fiber for durability and light weight Compact cage design allows the use of the same length chain as stock pulleys Two spring tension settings allow customized setup based on ride conditions Only compatible with 1X specific derailleurs - XTR M9100-SGS/GS and Shimano XT M8100-SGS Coated bearing races increase bearing service life by increasing hardness of race and reducing corrosion

- Featuring FURTHER DRIVE Technology – consisting of two new tech features that are both aimed at making the OSPW X boost the Transmission group’s ability to perform efficiently over time. - Active Debris Remover (ADR) feature - a unique new dust cover design that sits safely anchored in a recess in the pulley wheel, thereby completely enclosing the bearing. This is paired with a bladed groove structure that surrounds the dust cover, and dynamically extracts debris from the pulley wheel while it’s rotating. - ADR is paired with the new 14-tooth and 20-tooth solid disc pulley wheels, simply known as the ALPHA. - The ALPHA Disc features a two-piece construction. A separate narrow-wide tooth profile produced in a composite material that offers prolonged wear protection and noise reduction. As well as a solid aluminum disc that eliminates the potential of external objects getting stuck between the spokes of the pulley wheel, while adding strength and stiffness to the Pulley Wheel design. - The FURTHER DRIVE Technology is combined with an entirely new cage structure utilizing increased material structure – without adding unnecessary bulk – that makes it perfectly in line with the robustness that the Eagle Transmission group is celebrated for. But the true value is found in the FURTHER DRIVE Technology’s ability to provide peak performance deep in races or in the season when riders need it the most. Faster now and faster down the line – Cover More Ground. In the box: Complete OSPW X System for SRAM Eagle AXS Transmission

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features 13-tooth upper and 19-tooth lower, aluminum pulley wheels with Grade 3 Silicon Nitride balls Robust cage crafted from polyamide and carbon fiber for durability and light weight Coated bearing races increase bearing service life by increasing hardness of race and reducing corrosion Two spring tension settings allow customized setup based on ride conditions Only compatible with SRAM Rival AXS 12-speed 36t cassette CeramicSpeed products with coated bearings include a lifetime warranty

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. The handbuilt OSPW System has two spring tension settings, that allows customised setup based on riding conditions. This OSPW System is also compatible with the 2020 11 speed SRAM Red eTap derailleur featuring a clutch. Note; While there are visual similarities with the SRAM RED/Force AXS derailleurs, this OSPW system is not compatible with the SRAM Rival AXS, or SRAM RED, Force, or Rival XPLR eTap AXS rear derailleurs. Please see our Pulley Wheels for SRAM AXS Road In the box: Complete OSPW System for SRAM Red/Force AXS CeramicSpeed Pulley Oil, 15 ml. dropper bottle Custom tool for removal of stock cage and securing of OSPW System.

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features a 15-tooth upper and 19-tooth lower, aluminum pulley wheels with Grade 3 Silicon Nitride balls to provide absolute optimization of the rear derailleur Robust cage crafted from carbon reinforced polyamide for durability and light weight Two spring tension settings allow customized setup based on ride conditions Fits cassettes from 10 to 36-tooth Coated bearing races increase bearing service life by increasing hardness of race and reducing corrosion Only compatible with SRAM RED AXS and SRAM Force AXS

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features a 14-tooth upper and 18-tooth lower, aluminum pulley wheels with Grade 3 Silicon Nitride balls to provide absolute optimization of the rear derailleur The narrow wide tooth profile ensures durable chain retention Robust cage is crafted from carbon reinforced polyamide for durability and light weight Three spring tension settings allow you to customize performance and reduce chain drag Fits 10-50 tooth cassette range Coated bearing races increase bearing service life by increasing hardness of race and reducing corrosion

Entirely developed, designed, and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM eTap is a huge technological advance for the cycling industry. Matching the highest quality materials with a unique design, the OSPW System delivers lower friction and longer lifetime, improving your competitive advantage. Thanks to the OSPW System for SRAM eTap, the power savings over OEM pulleys start at 40%, and the CeramicSpeed Bearings inside guarantee 3-5 times greater longevity compared to commonly used standard pulleys on the market. The watt savings with a CeramicSpeed OSPW System for SRAM eTap start at 1.6 watts. The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12-speed SRAM eTap AXS. If you have the updated 11-speed SRAM eTap derailleur featuring the orbit clutch, you will need the CeramicSpeed OSPW System for SRAM eTap AXS derailleurs. - The overall power savings of the OSPW System for SRAM eTap commonly reach 40%-60% over a stock setup. - The oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. - The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12 speed SRAM eTap AXS. - This 3D-printed titanium version of the OSPW System comes with our CeramicSpeed Coated Bearings for even longer service life and lower friction. In The Box: - Oversized Pulley Wheel System - CeramicSpeed Bearing Oil in 15 ml dropper bottle - Sticker sheet - IMPORTANT: When traveling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not fit safely in most bike travel bags and could be damaged if left on.

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features 15-tooth upper and 19-tooth lower, titanium pulley wheels with Grade 3 Silicon Nitride balls Titanium pulley wheels are 3D-printed and hollow for additional weight savings and durability Robust cage crafted from polyamide and carbon fiber for durability and light weight Two spring tension settings allow customized setup based on ride conditions Fits cassettes from 10 to 36-tooth Coated bearing races increase bearing service life by incre

Convert your R45D Gen. 2, and R45D Centerlock hubs to XDR. Conversion kit is complete with axle and all driveshell internals for a plug and play swap to your R45D Gen. 2 and R45D Centerlock hub. - Ceramic Bearings - Compatible with SRAM Red eTap AXS, Eagle AXS, and all XDR and XD cassettes. - Compatible with R45D 6-Bolt Gen.2 hubs. Serial numbers will begin with 6910. - Compatible with all R45D Centerlock hubs. - Available with stainless steel or ceramic bearings. - 142x12mm axle. - Available in Silver or Black

MOG is a noun, verb, acronym, and unequivocally a state of mind for those who push the boundaries of distance and rolling exploration. There’s no road too long, no course too tough for those willing to MOG. Modern gravel riders demand versatile durability, abundant tire clearance, and storage solutions. The MOG has all of it, and more. ENVE’s IN-Route System makes exposed hoses and cables a thing of the past. Coupled with sleek in-frame storage, and performance geometry, there’s no race too fast for the MOG.

Hawk Racing SRAM Derailleur pulleys are designed to be used with any SRAM 11 speed groupset.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. Compatibility - HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate - HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX - HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy - HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC - HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

Kogel Oversized Kolossos Derailleur Pulley Sram eTap Red/Force Sram eTap version fits 12 speed Sram Red and Force Etap AXS derailleurs Also compatible with (post Sep. 2020) Red eTap A2 11sp derailleurs with the Hydro Clutch, NOT compatible with the original (pre Sep 2020) 11 speed etap derailleur Besides reduced friction, this cage is built with shifting accuracy, gravel worthiness and chain retention in mind Long tooth profile on lower pulley offers best possible chain retention Lower pulley assembly features a chain catcher to prevent jams Can be used dependably on or off road Oversized 14 and 19 tooth Kogel pulleys SPECIFICATIONS Model: Sram eTap AXS Road Seals Size: 14/19T

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. The durable composite body features our iconic three-way wrench shape and prevents scratching of expensive components. Angled ends allow for safe installation and removal of Shimano Di2 E-tube EW-SD300; wires in tight spaces. Universal coin cell tool helps remove and install battery covers on SRAM AXS and other electronic accessories. - Compatible with Shimano Di2 E-tube, EW-SD300 wires (nominally 3 mm OD connector) - Not compatible with Shimano Di2 E-Tube EW-SD50 wires (nominally 5 mm OD connector) — use the Park Tool EWS-1

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Named after our local fabled redwood-covered climb, the Zayante-S version is spec'd with a simplified and economic set of our new LevaTime II rings with steel bolts. - Carbon arms with M30 (30mm drive/28mm non-drive) aluminum spindle - Cold forged, proprietary LevaTime II X-rings (104/160BCD) with steel chainring bolts - Direct Mount (DM) 1x not available - For additional Praxis 2x chainring options, use PX211* - Works with 10/11sp drivetrains, not compatible at this time with SRAM AXS chain - Weight without BB: 684g (172.5mm with 50/34) - Unauthorized online sales prohibited by the manufacturer *M30 BB sold separately, use PX9040 for English 68mm, PX9011 for BB30/PF30 or PX9013 for PF86.5 BBs, PX-9014 for BBright, PX9015 for 386EVO, PX9016 for T47 external and PX9017 for T47 internal

Power meter battery lid and cover for Quarq eTap AXS Force 2x/1x & Red 1x.

Your tires are the only thing connecting you to the road or trail, and having optimal tire pressure can have more impact on ride comfort than both frame and wheel choice combined. But finding the right tire pressure requires trial and error. TyreWiz for Moto is the first-of-its-kind tire pressure sensor for Zipp 3Zero Moto wheels and takes the guesswork out of finding that optimal tire pressure. Lightweight and durable, TyreWiz adds only 10 grams to your tires. With an IPX7 waterproof and dustproof rating, you can confidently ride on any type of trail and know that your tire pressure sensor will keep going strong. TyreWiz reports data with +/-2% accuracy at a resolution of .1 PSI; vastly more accurate than any tire pump on the market. TyreWiz monitors the air pressure in real-time and relays the data to a cycling computer or a smartphone. That information is relayed to the SRAM AXS app and delivers personalized recommendations and pressure alerts. TyreWiz gives riders access to highly accurate, real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. Features - Data reported with +/- 2% accuracy at .1 PSI resolution. - Only compatible with Zipp 3ZERO Moto wheels. - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours. - IPX7 dustproof/waterproof rating.

Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.

Designed to mount to our MTB Cranksets (KAPIC, KAPIC Carbon, R-Hawk, and MTB 2/INpower) these chainrings are specifically for 1x drivetrains on all-mountain and enduro bikes. It's fully compatible with 9, 10, 11, and 12-speed groupsets, giving you the perfect excuse to ditch your old 2x drivetrain for the efficiency gains and weight savings of a 1x set-up. Wide-narrow teeth mean you won't have to worry about the chain falling off, especially if you choose to ride without a chain guide. This chainring is CNC machined from 7075-T6 aluminum for a simplified design that saves approximately 40 grams compared to the ring, spider, and bolt combo you'd need with a more traditional chainring and crankset. This design also improves overall rigidity for powerful pedaling, as well as giving it slight advantages in the aero department. - 7075-T6 aluminum for optimal strength-to-weight - Direct-mount with Rotor KAPIC, KAPIC Carbon, R-Hawk, R-Raptor cranksets - Semi-aero design improves rigidity and aerodynamics - Wide-narrow teeth for chain retention with 1x set-ups - Compatible with 9, 10, 11, and 12-speed groupsets, as well as our 1x13 groupset - Compatible with SRAM AXS Eagle

Designed with ROTOR's oval chainring shape to take full advantage of your strongest pedaling point, the Direct Mount Oval chainring helps you get the most out of every trail ride and enduro race with less overall effort and fatigue required. This oval chainring is direct-mount compatible with Rotor R-Hawk and R-Raptor cranksets designed specifically for 1x drivetrains on all-mountain and enduro bikes. It's fully compatible with all modern groupsets, ranging from 9-speed through 12-speed drivetrains, giving you the perfect excuse to ditch your old 2x drivetrain for the efficiency gains and weight savings of a 1x set-up. Wide-narrow teeth mean you won't have to worry about the chain falling off, especially if you choose to ride without a chain guide. This oval chainring is CNC machined from 7075-T6 aluminum for a simplified design that saves approximately 40 grams compared to the ring, spider, and bolt combo you'd need with a more traditional chainring and crankset. This design also improves overall rigidity for powerful pedaling, as well as giving it slight advantages in the aero department. - 7075-T6 aluminum for optimal strength-to-weight - Oval chainring shape reduces the "dead spot" in pedal stroke - Direct-mount with ROTOR Kapic, INpower, 2INpower, RHawk, RRaptor cranksets - Semi-aero design improves rigidity and aerodynamics - Wide-narrow teeth for chain retention with 1x set-ups - Optimum Chainring Positioning personalizes to your pedaling - Compatible with 9, 10, 11, 12, and 13-speed groupsets (including SRAM AXS Eagle). - Weight: 51g per 32t

- From a long line of tough, light-weight chain engineering from SRAM - Coupling for 12-speed Sram Eagle chains - Chain connector type: PowerLock - Compatible with Sram Eagle SX, Eagle NX, Eagle GX, Eagle X01, Eagle XX1 models - No tools necessary to install - Color: RAINBOW - 50 Pack

SRAM has optimized the Force AXS hood shape to provide increased finger wrap for more hand sizes, so you can stay secure sprinting for town lines, committing to the rut in a muddy CX race, or chattering down a long gravel descent. The acclaimed hydraulic brake provides excellent power and modulation for confident braking. AXS enabled for easy setup, personalization, and reliability eTap shift logic for intuitive shifting Optimized hood shape fits a wider range of hand sizes Carbon brake lever for light weight with textured shift paddles and hoods for control and comfort Reach Adjust to personalize fit for more hand sizes Wireless Blip compatible

Whether on the starting line or not, the X0 Eagle Transmission (T-Type) derailleur brings competition-tested prowess to riders who let their riding prove everything. Engineered as integrated and interdependent transmission components, the X0 Eagle Transmission derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface. This foundationally changes the entire relationship between cassette and derailleur. Beyond that, its Full Mount attachment method creates a far stronger connection that grips both sides of the frame. The new transmission derailleurs feature the same intuitive pairing and set-up procedure as our Eagle AXS derailleurs. While out on the dirt, it’s no exaggeration to say the X0 Eagle Transmission derailleur marks a seismic shift in robustness, allowing for common maintenance that serious riders demand. Featuring an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the B-knuckle and outer link that are fully replaceable, or upgradeable to the XX skid plate. Bottom line, the X0 Eagle Transmission derailleur changes the game while filling the need for premium componentry that’s been made to last. Hangerless Interface, Full Mount attachment method Competition proven strength and reliability Install and pair via the reliable and familiar standard AXS set-up and pairing procedure Premium precision made to last Overload clutch Replaceable B-Knuckle cover and outer link

The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.

- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1

Matchmaker MMX Clamp for SRAM AXS Pod & Pod Ultimate. Includes Clamp and T25 Screw.

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

The AXS battery cover is a light-weight cowling designed to protect the battery while installed on the derailleur. The AXS Battery Cover fits all AXS mountain bike derailleurs.

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit

The newly redesigned Eagle AXS Rocker Paddle gives the rider a traditional, familiar interface for their cutting-edge electronic control. Effortless electronic shifting paired with a more traditional-feeling actuation makes for quick assimilation of riders who are new to AXS and provides another ergonomic option for those who have run AXS previously. The controller's functions are customizable through the AXS app, allowing you to assign any action to any button. With AXS, you can truly make your cockpit your own. - Customize in-board and outboard shift options - AXS-enabled components can be programmed and personalized using the SRAM AXS App.

Service all SRAM brake lever pivot bearings with this easy-to-use bearing press. Keep all of the SRAM brake pivots feeling snappy and ready to ride. Features - Easily replace or install pivot bearings in SRAM brake levers - For use with CODE RSC, X0 Trail, Level Ultimate, Guide Ultimate/RSC, G2 Ultimate

Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws

The SRAM chain wear indicator tool is compatible with all the existing SRAM chain models and this includes HARD CHROME and non-HARD CHROME chain technology with a 0.8% wear critical specification.

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

- Crank spider RED/Force D1 - Includes 8 Torx mounting bolts - 107 BCD - 8-Bolt

The Flattop technology of the SRAM Rival chain creates a lighter, quieter, stronger chain that's compatible with 12-speed 1x and 2x eTap AXS drivetrains. Ride far, long, and fast. This chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Use for both 1x and 2x eTap AXS - Includes Flattop PowerLock

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

- Unique link shape creates a lighter, quieter, stronger chain. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight - Includes stainless steel rotor bolts

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

- Unique link shape allows the chain to be narrower and lighter while increasing strength and providing more tolerance between cogs. - Flattop technology enables a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts - HollowPin construction for increased strength and efficiency