Your SEO optimized title

Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

Surly MWOD Chainrings
$93.00
Trust Surly to come up with a reasonable solution to a bizarre problem. The Surly MWOD chainring set moves a bike's chainline away from the spinning tire allowing for the use of super wide tires on extra wide rims. The genius part is that it doesn't increase the Q factor (a.k.a. width of the bottom bracket) and keeps the low gears necessary for pedaling bikes with monster tires. The chainring set bolts directly to Mr. Whirly cranks and is available in two sizes.
Surly MWOD Inner Chainrings (Stainless)
$28.00 - $30.00
Surly's MWOD Inner Chainrings are made from stainless steel for extreme durability. These rings are compatible with Surly's MWOD cranks.
Specialized Praxis Chainrings
$150.00
Not all chainrings are created equal, and if you need proof of this, look no further than these chainrings that Praxis made exclusively for Specialized. - Custom design Praxis rings For Specialized only - Cold-forged, Heat-treated, and hard anodize 7075 T6 Aluminum - Compatible with Campagnolo, Shimano, and SRAM 10-/11-speed cranksets
Wolf Tooth Components 120 BCD Chainrings
$78.95
120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x application! - These rings fit any 120 BCD crankset or spider - For SRAM cranksets you must use the stock M8.5 bolts. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - For the 36t chainring and non-SRAM cranksets you will need the M8.5 bolts from Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones. - 36t is the smallest number of teeth that fits on a 120 BCD - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Origin8 Alloy Ramped Chainrings - 104 BCD/4-Bolt
$30.60 - $47.99
Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.
Origin8 Alloy Ramped Chainrings - 110 BCD/5-Bolt
$34.00 - $46.75
Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.
Origin8 Alloy Ramped Chainrings - 130 BCD/5-Bolt
$46.75 $46.75 - $54.99 15% Savings
Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.
Origin8 Alloy Ramped Chainrings - 94 BCD/5-Bolt
$35.99 - $42.50
Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.
Dimension Multi Speed Chainrings
$18.99 - $49.99
Dimension Multi Speed Chainrings. - CNC-machined AL-7075 - Has ramps and pins to aid in shifting (not on 74mm BCD inner chainring) - Same BCD as Surly Long Haul Trucker, Cross-Check, and Troll complete bikes (74mm & 110mm)
Dimension Singlespeed Chainrings
$16.99 - $46.99
Dimension Chainrings. - No ramps, pins, or shift aids
Shimano XTR M9000 Chainring Fixing Parts & Bolt
Genuine replacement chainring fixing parts and bolt set for the Shimano FC-M9000 double crankset.
PowerTap C1 Chainring No Sensor
Replacement Chainrings for PowerTap C1 power measuring systems - 5 bolt, 110 BCD compact design - Must replace with same chainring combination to measure correctly - Note: when replacing PowerTap C-1 chainrings, you must replace with the same range or sensor will have to be sent back to PowerTap for recalibration - This kit does not include a sensor - Ring Position/Type: Outer , Inner - Drivetrain Speeds: 11 - Color: Black - Material: Aluminum
FSA Pro Road Chainring 50T
- Some are designed to work in specific tooth combinations; see specific compatibility at individual part number bullet point - S9/C10 is compatible with Shimano 9 speed and Campagnolo C10 10-Speed
FSA Pro Track Black Chainring
FSA Pro Track 48t x144mm Black Chainring 1/2"x1/8" FSA Pro Track Chainrings are CNC Machined AL7075/T6 with laser-etched logos. · Requires 1/2"x1/8" chain
SRAM X-Glide 11-speed 110BCD Chain Ring
The X-Glide 11-speed Chain Ring was designed using the same upshift rivets that are used in SRAM's fast shifting XX mountain group set. This makes for smooth movement between front gears when using one of its Yaw derailleurs. The X-Glide chain rings were CNC machined using 7075-T6 aluminum which means that every aspect of the chainring receives precise control of shape and ramp. The chain rings are 5mm thick which gives them added stiffness. Although sold separately, the chain, chainrings, and front derailleur are designed as a single integrated system and in doing so, SRAM ensures that you'll always be in the gear your legs need. The SRAM X-Glide 11 Speed Chain Ring comes in two sizes: 50 and 52-ttoth. They both feature a 110BCD.
Wolf Tooth Components 102 BCD Chainrings For XTR M960
$75.00 - $77.00
The XTR M960, now 4 generations old in the XTR lineage, is an oldie-but-goodie crankset and Wolf Tooth aims to meet your 1x needs with these rings. Compatibility: - These rings only fit on the M960 crankset in the middle ring position. They are a 102mm BCD. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention)
Wolf Tooth Components 94mm BCD For 5-Bolt Chainrings
$63.95
This 94 BCD 5 bolt ring will serve all your Vintage crankset and Surly crankset needs! - 4 of the holes are threaded and 1 is a normal through bolt hole (done for Surly compatibility). Use a stock 10mm chainring bolt for the fifth, hidden arm. - These rings fit any 94 BCD 5 bolt crankset - For Plus size bike applications with the Surly OD crankset, e.g. Instigator and Krampus, you will need to use the stock spacers (Spacer Kit QBP Part number CR8609) that came with your 1x setup. You will also need some 16mm bolts from problem solvers. - This ring will work with your vintage 94 BCD 5-bolt cranksets!! - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes.
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$69.95 - $74.95
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Set of 4 Chainring Bolts for M8 Threaded Chainrings (10mm Long)
$14.95
Wolf Tooth designed these bolts to be the best on the market. They have a 4mm hex socket and are 10mm long so you can use a bash ring with your chainring that has threaded standoffs like the Wolf Tooth 104 BCD 30t ring, Elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings.
Shimano Dura-Ace R9100 Inner Chainrings
$35.00 - $55.00
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner
Shimano Dura-Ace R9100 Outer Chainrings
$226.00 - $329.00
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a more reinforced outer chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
Origin8 Alloy Classic Chainrings - 144 BCD/5-Bolt
$40.80 - $52.99
Origin-8's Alloy Classic Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with road, fixie and track drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.
Origin8 Alloy Non-Ramped Chainrings - 130 BCD/5-Bolt
$27.20 - $30.60 $27.20 - $35.99 Up To 15% Savings
Origin-8's Alloy Non-Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They feature an attractive and corrosion-resistant black anodized finish.
e*thirteen by The Hive Direct Mount Guidering M Chainring
$49.95
- Direct Mount Guide ring for TRS series cranks - Dual width "M" tooth profile engages the chain securely even at extreme angles - 7075-T6 aluminum construction optimized for all chainguide systems to prevent chain jamming, 49mm chainline - Requires spider
e*thirteen by The Hive Direct Mount Shiftring Sets
$59.99 - $149.95 $149.95 Up To 60% Savings
- Direct Mount Shiftring sets for TRS series cranks - Integrated ring set mounts directly to crank arm - 7075-T6 aluminum construction with 4mm width optimized for all chainguide systems to prevent chain jamming - Requires spider lockring removal tool
e*thirteen by The Hive Triple Shiftrings
$39.98 $79.95 50% Savings
- Triple shiftrings work only in 24-34-42t combination - 9 or 10 speed compatible
e*thirteen by The Hive Turbocharger Guard
$54.95
- Patent pending, low weight, high strength, impact absorbing design - Captured aluminum inserts eliminate over-tightening of chainring bolts - Embossed chrome badging - BCD: 4 x 104 - Not compatible with pre-09 E-13 chainguides. 87g (36t)
Wolf Tooth Components 5-Spoke Gxp Direct Mount Ring
$66.45 - $78.00 $78.00 - $83.00 Up To 6% Savings
- 5-spoke ring replaces the existing chainring and spider on 3-bolt GXP cranks - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Fits SRAM S2200, S2210, X9, X0, X01, XX1, X1 and Truvativ AKA GXP cranks - Dished ring provides 50mm chainline on GXP or BB30/PF30 long spindle (with 15.4mm drive side spacer) - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 65g (30t)
Wolf Tooth Components 64/104 Chainring
$59.95 - $65.95
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Cannondale Direct Mount CX Ring
$94.95
- Road/Cross/Gravel offset ring has a reverse dish for perfect chainline - Fits Cannondale Hollowgram SI & SISL cranksets, replacing ring and spider - 48mm chainline, same as Cannondale XX1 spider. Use 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Features Drop-Stop tooth design to prevent unwanted chain drop - Made in the USA from 7075-T6 aluminum alloy - 64g/68g/72g (30/32/34t)
Page 1 of 8 Next page