Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Racks

Wald 215 Rear Rack
$25.99 - $66.99
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds
Tubus Cargo Evo
$140.00
It's a classic, all-around carrier now updated for modern requirements. The Evo carrier has improved by adding 3D-feet with perfect force absorption and integrated screw attachment. The super-light mounting parts are included for mounting stays to the frame. Klick spring-clamp and rearlight protection. - Weight: 530g - Carrying Capacity: 40kg/88 pounds
Tubus Cargo Evo +2cm
$140.00
It’s a classic, all around carrier now updated for modern requirements. The all around carrier has improved by adding 3D-feet with perfect force absorption and integrated screw attachment. New super light mounting parts are included for mounting stays to the frame. Klick spring-clamp and rearlight protection.
Topeak BabySeat II Rack
$59.95
Topeak's tubular aluminum rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. So go ahead and bring your favorite little passenger or gear along for the ride.
Topeak BabySeat II Rack (Disc Mount, 29-inch)
$59.95
Topeak's BabySeat II rear rack allows you to easily mount your BabySeat II (sold separately) to your 29er. This tubular aluminum rack features tabs that clear most rear disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger.
Topeak Explorer Tubular Rack
$44.99
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.
Topeak Explorer Tubular Rack w/Spring
$49.95
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender as well as a spring-loaded bar to hold down your belongings.
Topeak MTX BeamRack
$59.95 - $59.99
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Surly Rack (Rear)
$155.00
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
Sunlite One-Piece Monostay Adapter
$7.99
- Used for attaching rear racks onto mono stay bikes - Rubber coated steel for all weather durability
Portland Design Works Bindle Rack
$88.00
The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty
Portland Design Works Everyday Rack
$99.00
Strong and svelte, the Everyday Rack from Portland Design Works mounts to frames with or without eyelets and will fit around wheels and tires up to 29x2.4". The handsome bamboo platform is slightly tapered, giving the Everyday Rack a light, racy feel that looks great on a wide range of frame styles. The lower mounting bars allow panniers' center of gravity to be closer in line with your wheel, improving rear-end stability even when hauling heavy loads. Additionally, it means the platform is easily utilized, even when riding with two panniers. The Everyday Rack is crafted from durable alloy tubing, may be mounted to a rear wheel skewer, includes a tail light mounting point and solid, adjustable attachment arms. It's a breeze to install, so you'll be pedaling cargo in no time. Rated for up to 25 kgs (55 lbs). - Strong alloy tubing - Double ply bamboo deck - Deck measures: 209 x 76 mm (8.25 x 3") - Height: 419 mm (16.5") - Weight: 1.6 lbs  - Max Load: 25 kgs (55 lbs) - Lifetime PDWarranty
Portland Design Works Loading Dock Rear Rack
$85.00
You'll be amazed by how much cargo you can transport with your very own Loading Dock. This attractive rear rack from Portland Design Works isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support up to 35 pounds so you can load 'er up with all the essentials. - Lightweight aluminum tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 2 lbs - Rated to 16 kgs (35 lbs)
Origin8 Classique Cargo HD Front Rack
$76.99
• Mounts to front brake caliper hole and front axle • Fits bikes 26-29-inch • Heavy duty aluminum construction supports up to 55 lbs • Platform area measures 14.5 x 12-inch
Jandd Extreme Front Rack
$112.95
The Jandd Extreme Front Rack is a must-have for long tours. Its strong 6061 aluminum is double welded for strength in the most adverse conditions and the generous 6-inch-wide top accepts trunk and sleeping bags. Panniers can be mounted low for stability or high for added clearance. The mounting slots allow for solid attachment using clamps (included) or at fixed eyelet points on the fork.
Jandd Low Front Rack
$70.00
For touring or commuting, the Jandd Low Front Rack is great. It mounts low on the front fork. By locating panniers up front and below your bike's center of gravity, your bike will handle better than a bike with the same load mounted at the rear. This rack is made of stout 6061 aluminum and double welded at all the key stress points for durability.
Jandd Rear Rack Lite
$51.95
Jandd Lite Duty Rear Mount Rack is designed for the budget-minded cyclist who desires a high quality rack at a reduced price. - Fits up to 700c wheels - AL-6061 construction - Platform dimensions: 6 x 13.25 inches - Weight: 752 grams - Weight limit: 25 pounds
Jandd Standard Rack
$69.00
The Standard Rack was designed for anything from jaunts to the corner store to cross-country expeditions. Its 6-inch-wide top fits Jandd Rack Packs perfectly and its 3-inch extended bottom rails and vertical struts are in the same plane for a perfect pannier fit. All stress points are double welded and all of its hardware is stainless steel for maximum durability.
Jandd Touring Handle Bar Pack 2
$125.00
For the serious cycle tourist, nothing completes the perfect setup like either of the Jandd Touring Handle Bar Pacs. These packs are mounted securely to the handlebars by Jandd's Quick Release Bracket, allowing the bags to be attached and detached instantly. When secured to the mounting brackets the Touring Pacs are extremely stable as the result of HDPE stiffener plates and a diagonal rod stock stiffener. The diagonal rod pivots allow these bags to be folded flat, a great convenience for storage or when packing for air travel. The Handle Pacs also have d-rings for optional shoulder straps or for storing in a closet. Chock full of useful features, the main compartment opens away from the rider to allow easy access on the go and sports an interior elastic strap on one side for securing an extra water bottle in an upright position. Side compression straps can be pulled tight to ensure stable load distribution, and the roomy mesh side pockets have been redesigned with an elastic strip at top to keep their contents from bouncing out on bumpy terrain. To locate your position in any weather, the Touring Pacs each come equipped with a marine-grade vinyl zippered map compartment on top, and a strip of 3M Scotchlite Reflective Material runs across the front of each bag. While the Touring I has a single flat pocket across the front, the Touring II has an additional front pocket with a separate flat front pocket, all with storm-flapped zippers. Whether complementing a set of touring panniers or used alone, either Touring Handle Bar Pac is an excellent way to carry gear with instant accessibility. Specifications: - Volume: 1000 ci/ 17 ltr - Weight: 34.6 oz/ 980 g - Dimensions: 9.5x 10 x 6 (in) 23 x 25 x 15 (cm) - Material: Dupont Cordura®
Jandd Touring Handle Bar Pack I
$115.00
For the serious cycle tourist, nothing completes the perfect setup like either of the Jandd Touring Handle Bar Pacs. These packs are mounted securely to the handlebars by Jandd's Quick Release Bracket, allowing the bags to be attached and detached instantly. When secured to the mounting brackets the Touring Pacs are extremely stable as the result of HDPE stiffener plates and a diagonal rod stock stiffener. The diagonal rod pivots allow these bags to be folded flat, a great convenience for storage or when packing for air travel. The Handle Pacs also have d-rings for optional shoulder straps or for storing in a closet. Chock full of useful features, the main compartment opens away from the rider to allow easy access on the go and sports an interior elastic strap on one side for securing an extra water bottle in an upright position. Side compression straps can be pulled tight to ensure stable load distribution, and the roomy mesh side pockets have been redesigned with an elastic strip at top to keep their contents from bouncing out on bumpy terrain. To locate your position in any weather, the Touring Pacs each come equipped with a marine-grade vinyl zippered map compartment on top, and a strip of 3M Scotchlite Reflective Material runs across the front of each bag. While the Touring I has a single flat pocket across the front, the Touring II has an additional front pocket with a separate flat front pocket, all with storm-flapped zippers. Whether complementing a set of touring panniers or used alone, either Touring Handle Bar Pac is an excellent way to carry gear with instant accessibility. Specifications: - Volume: 828 ci/ 13.6 ltr - Weight: 32 oz/ 910 g - Dimensions: 9.5 x 10.5 x 5.5 (in) 24 x 27 x 14 (cm) - Material: Dupont Cordura®
Giant Alloy Rack
$37.00
Giant's Alloy Rack is light, durable and boasts a center platform, which helps support loads up to 50 lbs. It acts as a partial fender and features a mount for a reflector or taillight (sold separately). This great rack is perfect for carrying panniers and bags (sold separately).
Giant Progeny Child Carrier Rack Kit
$29.95 $38.00 21% Off
Swapping your Giant Progeny Child Carrier from one bike to another is easy with the Progeny Child Carrier Rack Kit. It includes a rear rack and all the hardware you need to install.
Electra Cruiser Front Tray
$89.99
- Steel tubing - 45 x 38.5 x 8 cm
Dahon Arclite Aluminum Rack
$43.99 - $59.99
The ArcLite rack features large gauge aluminum tubing for excellent strength at a low weight. Includes a bracket for a light or reflector. Available versions for most 16” and 20” Dahon folding bicycles.
Bontrager Seatpost Rack
$39.99
Bontrager's Seatpost Rack is a great choice for frames without built-in eyelets, this versatile rear rack quickly attaches to your seatpost with an easy to use four-bolt design. Compatibility with Trek's Interchange System means it mates seamlessly with a variety of Interchange bags (sold separately) that install fast and secure. It fits both 27.2mm and 31.6mm seatposts.
Blackburn Central Seatpost Rear Rack
$49.95
Versatility and simplicity is the virtue of this design. The rack deck can adjust fore and aft, but also flip over to better fit different sized bikes. - No frame mounts required - Performs well with trunk bags - Light and reflector mounting loop - Fits seatposts 22-32mm in diameter - Aircraft-grade 6061 aluminum tubing - 22 lb/10 kg carrying capacity
Blackburn EX-1 Disc Rack
$59.95
A disk brake compatible update of the original rear rack design where it all began for Blackburn in 1975. - Mounting system works with disc brake frames and bikes lacking rear dropout rack mounts - Lower mounting points attach to included extra-long QR skewer - Three strut design for maximum load control - 12mm gauge aircraft-grade aluminum rod ensures long lasting durability - Fits both wide and narrow tire - Fits 26" and 700c frames - Compatible with Copilot child seats - 535 grams - 40lbs/18.2kg carrying capacity
Blackburn EX-1 Expedition Rack
$44.95
Blackburn's EX-1 rack does everything. Built for maximum durability of 9mm aircraft-grade 6061-T6 aluminum, this rack features a 3-strut design to control the load and is compatible with Copilot child seats (sold separately). It fits most bikes.
Tubus Cosmo
$210.00
The COSMO is the flagship model for stainless steel Tubus carriers. It has a wider cargo area, extreme carrying capacity, and a longer back for better tail light protection. - Weight: 680g or 24 oz. - Load Capacity is 40kg or 88 lbs. - Wheel size 26? or 700c
Tubus Disco
$135.99 - $150.00
So, you have disc brakes, and only the best is good enough for you. Now, you can mount a Tubus carrier on your bike. Their Disco is designed to be combined with disc brakes. Instead of using added accessories, the Disco simply fits onto your frame. The carrier is easy to mount using the included quick release, or it can also be mounted on eyelets of the frame. Simply load up your bike and go. - Includes QR Skewer
Page 1 of 4 Next page