BMX

The Haze V2 top load is made from forged alloy and features a CNC machined stranger logo on the side. Reach: 50mm Rise: 30mm

4130 chromoly custom forged tubing. Custom investment cast oversize spindle bosses. Hollow 22mm, 48 spline spindle. Flush mount 8mm cro-mo hex bolts. 100% heat treatment after welding. Spline and bolt drive compatible.

The Shadow Conspiracy Little Ones BMX Pegs are made from Heat Treated 4130 Chromoly that is then machined down internally to give you maximum strength with minimum weight. 4 inches long, 34mm in diameter and compatible with both 3/8 inch and 14mm axles, the Shadow Conspiracy Little Ones Pegs are also available in a number of bold colors. Sold as a single peg.

Material: cold Forged & CNC Machined 6061-T6 Alloy - Reach: 48mm - Rise: 36mm

7075 alloy, CNC machined with steel insert for durability

- Low profile body with knurling for additional traction - Injection molded composite with molded pins - Loose ball only - 4140 heat treated spindle - Replacement parts available

The Revive wrist support features a 4-way stretch elastic with a Stabalite buttress support to aid in preventing hyper-extension. - One size fits most

The Shadow Conspiracy Stacked BMX Bottom Brackets - 100% CNC 6061-T6 alloy cones - Custom Shadow bearings with logo and red seals - Includes: 2 sealed bearings, internal spacer, custom cone spacers and alloy washers

Super Slim elbow and knee pads offer low profile protection. - Features dual layer EVA foam and removable, custom molded cups - Slim fitting pads are made from Airprene and Neoprene material - Sold as a Pair

Odyssey JC/PC Pedals are designed with replaceable pedal bodies, pins, and nuts. · No bearings, adjustable bushing tension · Two-piece plastic bodies with replaceable metal pins and CroMoly spindles

- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm w/ 3/8's adapters included - 4? (length) x 1.3/8? (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)

This tire is based on the popular Path tire from the early 2000’s, but it’s been fully redesigned to meet today’s riding styles. FEATURES - Directional tread pattern with smooth center tread - Proprietary rubber compound - Improved grip & wear resistance - Micro-knurled side blocks - Dual ply sidewalls - 100 max PSI - Color: Dual-Ply Black

Made to fit all 22mm crank spindles and press-fit Mid BB frames. Simple and easy to install. Includes an assortment of spacers to optimize chainline and crank clearance. Odyssey 6061-T6 aluminum dust spacer included.

The Senec pedals have no bearings, which means simplicity and durability. Using a propriety pedal body material and grease, the pedal bodies spin directly on the spindle acting as a bushing itself and leaves no small parts left to come loose or break. In addition to this new bearing-less system, the Senec pedals use a massive 17mm forged hollow spindle. This creates a huge increase in strength over traditional pedal spindles, while keeping about the same weight. The pedal bodies are also universal, which means if you need to buy a replacement body it can be used on either the left or right side and are very affordable.

Designed and tested by Connor Lodes. Top-load alloy stem with extensive internal and external machining. Beveled edges, rounded back , top cut-out for fork top cap to be recessed and CNC logo also gives this stem a great aesthetic look. Connor Lodes Signature Stem Reach: 50 mm Width: 50 mm Stack Height: 32 mm Rise: 21 mm (Upright) Recessed for ø32 mm Bolt Weight: 11.1 oz

- Revised Design with Greater Tyre Clearance. - Extra stiff for superior braking performance - Increased braking power & performance. - Suitable for front or rear applications. - Comes with soft compound clear brake pads & colour coded cable hanger.

• Super lightweight design. • Very affordable & shin friendly. • Made from Nylon/Fibre mix. • Looseball axle type only in 9/16?. • Weight per pair: Nylon/Fibre mix 376 grams (13.26oz)

2016 Colony RX3 Rotary Gyro Cables. • Twin Upper Cable design.

• Full CNC machined from 6061T6 Alloy. • Designed for use with our Official, Variant & Squareback stems. • Weight: 15 grams (0.52oz)

Flanged version of the popular Cult X Vans waffle grips. These grips are designed by Cult and made by ODI in the USA from their krayton soft rubber compound. This grip uses the legendary Vans waffle design and Cult are hoping they prove to be as popular as BMX grips as they are as shoes. Includes 2 grips and 2 Plastic Bar Ends.

Dropped Stem details: – Full 6061-T6 lower rise front loader stem – Solid bolts – CNC machined BSD logo – Regular 7/8? or new ‘OS’ 1? clamp options

The Animal Akimbo cranks are 3-pc cranks designed to take some serious street abuse. Featuring tubular chromoly arms with laser-etched Animal logos and a 1-pc machined sprocket boss for regular or nano drive, 22mm hollow chromoly spindle and hollow spindle bolts. Includes installation and removal tool. RHD/LHD compatible.