Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Gauges & Patch Kits

$7.50
- Solution for mounting pumps and C02 inflators on frames or seatpost
- Soft rubber block and Velcro loops hold pumps tightly

$16.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

$47.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

$12.10
90 Degree twist style mini CO2 head used on SWAT products
- Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow.
- Flow can be controlled or stopped by threading cartridge back into head.
- Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

$9.00
The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.

$70.00
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere.
- Full metal construction, guaranteed for 25 years and covered by SILCAShield
- Can effectively seal on valve stems as short as 10mm!
- Uses SILCA 254 High-Tech Elastomer gasket
- Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear
- Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose
- Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

$22.95
The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool.
Features:
- 1 Tire Lever With Built In CO2 Inflater
- 2 Tire Levers With Built In Spoke Hooks
- Presta & Scharder Valve Compatible
Specs:
- Number of Tools: 2
- Weight: 38 Grams
- CO2 Lever Length: 5 1/4?
- Lever Length: 4 1/2?

$214.00
TyreWiz is the first-of-its-kind tire pressure sensor for riders of mountain bikes and road bikes. Lightweight, durable, and powered by a long-lasting user-replaceable coin cell battery, TyreWiz monitors air pressure in real-time and relays the data to a cycling computer or a smartphone. The TyreWiz app uses that data to deliver personalized recommendations and pressure alerts. For the first time, riders have access to highly accurate real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort.
- TyreWiz is the first real-time tire pressure sensor for bicycle riders
- Designed for all bike riders, regardless of their experience or bike’s intended use
- Works with any tire that uses a removable Presta-style valve core: both tube and tubeless, and tires with anti-flat sealant
- Data can be read on a cycling computer or smartphone with the app for iOS and Android
- Smartphone app displays personalized recommendations, current tire pressure, and low/high-pressure alerts
- Retail package includes two sensors, batteries, and a valve core removal tool
- Use it for every ride to find the perfect combination of tire, wheel, and pressure in changing terrain and conditions
- Include LED lights to indicate when pressure is outside the target range
- Designed for road and mountain bike riders
- Personalized tire recommendations in the smartphone app for iOS and Android
- NFC pairing for fast and easy connection by BLE to a phone
- Data reported with +/- 2% accuracy at .1 PSI resolution
- Broadly compatible with tires that use a removable Presta-style valve core
- Inexpensive, user-replaceable CR1632 battery lasts for 300 hours
- IPX7 dustproof/waterproof rating
- Box includes valve core removal tool for installation

$25.99
The Pro Digital Pressure Checker makes it easy to ride with optimal pressure with highly accurate readings.
- Pressure release button for fine tuning
- Measures from 0 to 11 bars (0 to 160psi)
- For both Schrader (without brass insert) and Presta valves

$36.95
Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.

$24.95
- Allows you to upgrade floor pumps to accept Prestacycle attachments
- Spin-On presta head with pressure release option, USA-made 36" hose and hose clamp are included

$9.99
- Comes with Dual Head
- Compatible with all Planet Bike floor pumps
- #1002-5 Auto head with hose can be used as a substitute for this item and is compatible with all pumps that used the dual head

$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

$6.00
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

$138.95
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!

$15.99
Meiser Pressure Gauges feature a durable steel case with polished brass bezel and 2" dial.
Compact design fits easily into handlebar or seat packs
Helps to fine tune tire pressure for the ultimate in performance

$18.99
Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.

$3.49
Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.

$24.99
One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again!
Self-contained tire repair kit includes:
- 5 tubeless repair plugs
- 2 Presta core valves
- Integrated valve core removal tool
- Small, strong plugger tool
- Alloy weatherproof storage capsule

$64.95
Pump less, ride more! For use with home or shop compressors, this hand-held inflator is compatible with Presta valves and comes complete with a Woodsman pump head. By use of a clever valve plunger within the Woodsman head, the gauge shows actual tire pressure rather than air hose pressure.

$21.99
Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure.
- Fits Presta/Schrader
- Accurate up to 160psi
- Shows PSI and bar
- Weighs only 37g

$16.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

$22.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

$7.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Page 1 of 4
Next page