Safety

Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.

The original model of our mountain bike bell, Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. It includes two separate o-rings to fit all handlebar sizes and is easy to move between bikes. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life. - We've also upgraded the backing pad to a much grippier rubber that prevents the bell from movement while shifting between ring modes. The new pad is much more durable than the old pad and won't wear out.

- The original third-Eye bar-End mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to most handlebar bar-End with a rubber, Internal-Expanding plug system

Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too!

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

The LTD Mirrycle Mirror quickly attaches to Bontrager Isozone handlebars using the supplied wrench. It has a convex mirror for a wide field of view to help you clearly see approaching traffic. And the mirror easily adjusts to your optimum viewing angle.

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Yet its diminutive dimension and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear.

Keep an eye on what's behind you with MSW's Selfie Mirrors. With options to mount on a handlebar, on your helmet, or into your bar end with a folding design, you're free to choose the rear view that speaks to you.

Lezyne's Classic Brass Bell features a compact, classic shape constructed from modern, high-quality materials. The bell itself is made from high-polished brass, mounted to a machined aluminum base. The small brass striker provides a sharp, impressively loud ring when flicked, warning others of your presence. A simple O-ring attaches the bell to a variety of tube sizes and shapes while integrating cleanly with any bicycle. Weights - Small: 21g - Medium: 28g

Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell. - Compact, classic bell-shape construction for a high-quality sound - Bell and striker are made from high-polished brass - CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube - Molded rubber shims add grip and fine tune fitting - Stainless steel hammer - Impressively loud ring - Weight: 34g

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 23.8 – 31.8mm handlebars - Weight: 46.5g

• Adjustable quick-release strap • Ideal for MTB handlebars • Fits 20-32mm handlebars

Twist to the left, twist to the right. Whichever direction, it's the perfect way to say 'Hello.' Twistabell provides a pleasant ringing sound all around town. Let people know you’re coming through—and do it in style. - Ambidextrous style is designed for both righties and lefties - Fits standard bicycle handlebar - Includes attachment hardware - Clamp: 22.2mm - Material: Stainless Steel

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

The Woodpecker Bell features a faux wood grain finish with a charming woodpecker hammer. Looks like a bird pecking at a tree, sounds like a bell. Check out the video for a YouTube sound clip!

The sleek and ultralight BM-45 bar end mirror easily attaches to drop and flat bars, making it perfect for all bikes. Constructed of aluminum and glass for durability and nearly distortion-free viewing, the BM-45 represents the height of handlebar mirror construction and design. Minimal projection from the bar means never having to sacrifice clean aesthetics for critical rear-view safety again.

CatEye's handlebar-end mounted mirror is sturdy and sure to last through heavy duty riding. It's fully adjustable so you can comfortably see what's behind you. This scratch resistant mirror installs easily and gives a wide-angle view.

This lightweight, small mirror from Blackburn adheres directly to your helmet for a great rearview to make all your rides safer. It can be removed in seconds, too. - This product is covered by blackburn’s limited lifetime warranty. - Weight: 1.6 oz

With a smart universal mounting system, the multi-mirror works with many different handlebars by wedging into the ends of your bars. - Our mirrors don't weigh much but offer you a ton of visibility - Easily mount these convenient mirrors directly on your handlebars - 4.8 oz - Lifetime warranty

A convenient mount design allows you to securely attach to the hoods of your road bike. A lightweight and durable plastic construction, this is a must-have safety accessory for anybody on the road for many hours a week. - Our mirrors don't weigh much but offer you a ton of visibility - Easily mount these convenient mirrors directly on your handlebars - 3.2oz - Lifetime warranty

- Highly reflective colored spoke covers give your new bike that old school vibe - Perfect for cruisers, BMX, or wheelie bikes that need that little bit of extra style - Sold in bags of 36, enough for one wheel - 150mm long

- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter

Equally small like Isabell and light at 34 grams. Urethane rubber strap adjustment fits 19.05mm to 31.8mm.

Our smallest, most compact bell—39 grams, very compact, polished brass, fixed ringer. It's not easy to gain the attention of other cyclists, runners and walkers without making noise, and bells beat yelling. There is actually an art to making a nice sound come out of something so small. Stainless steel thumbscrew so you can install or remove the bell with no tools; fits 31.8 with a shim to fit 28.6.

Same size as Maybell, but heavier (darn brass)—71 grams. Really BIG sound due to the brass dome, adjustable ringer. It's not easy to gain the attention of other cyclists, runners and walkers without making noise, and bells beat yelling. There is actually an art to making a nice sound come out of something so small. Stainless steel thumbscrew so you can install or remove the bell with no tools; fits 31.8 with a shim to fit 28.6.