Your Search: "sram axs"

From the start, 3T's goal for the Strada was the best aerodynamics AND comfort. Because without comfort, you won’t be able to maintain your aero position. While pushing the limits of aerodynamics and comfort in every detail, the Strada has two clearly distinct zones: Speed zone: the front half of the bike, with its ultra-deep yet narrow headtube, wrap-around downtube and bladed fork. Comfort zone: the curved seattube, slender seatstays and long exposed seatpost provide the ultimate comfort while also helping aerodynamics Tires provide more compliance than any other part of the bike. Wider tires are better at reducing shocks from cracks, curbs, cobbles and potholes, They even have lower rolling resistance, because their shorter contact patch requires less bending by the casing. In addition, wider tires reduce fatigue caused by high-frequency road buzz. But aerodynamics are also important on such rides, and the Strada remains the first aero bike engineered around wider tires (just like the Discus wheel range is engineered specifically around wider tires). Finally you can be fast and comfortable all day, every day, with one and the same bike. Frame - 3T Strada Integrale 2X (FD hanger is part of the frame) Frame material - Unidirectional pre-preg carbon, High-modulus/high-strength performance blend layup Fork - 3T Fundi Integrale Headset - 3T MinMax Integrale IS42/34 | IS47/38(36deg) Thru-axle - 100x12 front - 142x12 rear Handlebar - 3T Superergo Integrale LTD (XXS: 38cm - 51: 40cm - 54&56: 42cm - 58: 44cm) Stem - 3T Apto Integrale Stealth (XXS: 80mm - 51: 90mm - 54:100mm - 56: 110mm - 58: 120mm) Front Derailleur - Sram Rival AXS Rear Derailleur - Sram RIval AXS max 36T Shift/brake levers - Sram Rival AXS Brakes - Sram Rival AXS Hydraulic Disc w/ Sram 160mm rotor Crankset - Sram Rival AXS, 46-33T, narrow Q-factor (XXS: 165mm - 51: 170mm - 54&56: 172,5mm - 58&61: 175mm) Cassette - 12-speed Rival AXS 10-36T Wheelset - Fulcrum Rapid Red 900, 700c, 22mm internal width, tubeless ready (upgrade to 3T Discus 45|32 LTD possible) Tires - Pirelli PZero Road 700c Seatpost - Strada Seatpost for Ritchey Clamp Saddle - Selle Italia Model X Superflow

Machined in San Diego, CA, these round chainrings are made of 7075 aluminum SRAM 8-bolt Direct Mount fitment Works with both SRAM and Shimano 12 speed chains Weight: 58g

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec II brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers with Shimano brakes. Our BikeYoke I-Spec II adapters are available as "left" or "right" for Shimano brake levers but you can also flip sides if you prefer a more inward or outward remote position: Compatible brakes: - Deore BL-M6000 - Deore BL-501 - SLX BL-M7000 - XT BL-M8000/8020 - XTR BL-M 9000/9020 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec B brake and saves an extra clamp on the handlebars. They can also be used to mate SRAM triggers or other remotes with Shimano brakes. Left and right + flip-flop compatible. Compatible brakes: - SLX BL-M675-B - XT BL-M785-B - Zee BL-M640-B - Saint BL-M820-B Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapters are available as "left" or "right" side for Shimano brake levers and you can also flip sides if you prefer a certain more inward or outward remote position: Compatible brakes: - Deore BL-M6100/6120 - SLX BL-M7100/7120 - XT BL-M8100/8120 - XTR BL-M9100/9120 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles

For easy connection and disconnection of Ceramicspeed chains.

CeramicSpeed UFO Chain - KMC 12-Speed, 126 Links, Silver Pre-treated chain with coating optimized for 600km of use, after which it can be used as a normal chain. This chain has been optimized for all 12-speed drivetrains and is compatible with all 12 speed group sets, including SRAM Red and Force AXS pre-treated with CeramicSpeed's UFO coating Specifications: Links (links): 126 Color: Silver Chain Connection Type: Reusable Master Link Half Link Chain: No Drivetrain Speeds: 12

From the world's fastest chain coating to the most capable range of greases to race-winning chains, Ceramicspeed's UFO product group offers the best solution for keeping your drivetrain and bearings optimized and protected.

The 12-tooth narrow-wide design provides exceptional shift performance. The narrow-wide design delivers precise engagement of the chain, both on and off the pulley wheels. This product is designed, developed and hand-built in Denmark and offers improved chain friction performance and increased longevity.

The 12-tooth narrow-wide design provides exceptional shift performance. The narrow-wide design delivers precise engagement of the chain, both on and off the pulley wheels. This product is designed, developed and hand-built in Denmark and offers improved chain friction performance and increased longevity.

SRAM's 1x Eagle component system boasts a twelve-speed cassette. We built pulleys that can handle the load better than stock. These CeramicSpeed Pulley Wheels work with less drag, adding to the power transmitted to the rear wheel while offering greater durability, going longer between replacement intervals. These pulleys are also fully compatible with the SRAM Eagle AXS derailleur. The aluminum pulleys with standard bearings are 34.4% more efficient than stock and use our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The upper and lower pulleys both have a narrow-wide tooth design with 14 teeth each. As the upper and lower pulleys have different tasks, they have different shapes. You'll find they are thus marked, and have directional arrows. These pulleys should be installed with stock SRAM pulley spacers. Save those from your old pulleys before installing CeramicSpeed. The kits come with CeramicSpeed Oil in a 15ml dropper bottle and grease in 5ml syringe. The bearings come pre-oiled. The grease can be used on the pulley bearings when riding in particularly harsh environments. In the box: - 2 x 14-tooth pulley wheels - CeramicSpeed Bearing Oil in 15ml dropper bottle - CeramicSpeed Grease in 5ml syringe - Sticker sheet

The CeramicSpeed Pulley Wheels for SRAM AXS 12-Speed offers a unique symmetrical 14-tooth narrow-wide design that provides exceptional shift performance. The 12-tooth narrow-wide design provides exceptional shift performance. The narrow-wide design delivers precise engagement of the chain, both on and off the pulley wheels. This product is designed, developed and hand-built in Denmark and offers improved chain friction performance and increased longevity. In the box: Two 12-tooth pulley wheels Alloy Spacer Kit CeramicSpeed Bearing Oil, 15ml. bottle Sticker Sheet

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. Pulley Wheel Material: Aluminium The handbuilt OSPW System has two spring tension settings, that allows customised setup based on riding conditions. Pulley Wheels: CeramicSpeed 15-tooth upper and 19-tooth lower In the box: - Complete OSPW System for SRAM Red/Force AXS - CeramicSpeed Pulley Oil, 15 ml. dropper bottle - Custom tool for removal of stock cage and securing of OSPW System

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting for maximum efficiency. The handbuilt OSPW System has two spring tension settings that offer you customized setup based on riding conditions. This OSPW System is also compatible with the 2020 11-speed SRAM Red eTap derailleurs featuring a clutch. - Pulley wheels: CeramicSpeed 15-tooth upper and 19-tooth lower - Pulley wheel material: aluminum - Cage material: carbon-reinforced PA - Bearing options: CeramicSpeed Standard or Coated - Compatibility: SRAM Red AXS and SRAM Force AXS. 2020 SRAM Red eTap 11-speed derailleur with the orbit clutch. This system is also compatible with the wider-range Force AXS medium cage derailleur - Cassette Compatibility: Fits 12-speed 10-36 tooth cassettes. Fits 11-32 tooth cassettes when used with an 11-speed clutched derailleur - Spring Tension Settings: 2-spring - Speeds: 12-speed - Discipline: Road and Gravel/Cross - Custom tool included for removal of stock cage and securing of OSPW. The factory clutch mechanism will remain intact. There is no damage or modification to the clutch for the installation of the OSPW System In the box: - Complete OSPW System for SRAM Red/Force AXS - CeramicSpeed Pulley Oil, 15 ml dropper bottle - Custom tool for removal of stock cage and securing of OSPW System

The OSPW X for SRAM Eagle AXS features a narrow wide tooth profile to ensure durable chain retention. The 14-tooth upper and 18-tooth lower pulleys reduce chain drag, while the custom-designed carbon fiber pulley cage ensures both durability and light weight. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/Oil: Pulley Oil - Compatibility: SRAM Eagle AXS (Electronic) - Compatibility Cassette: 10-52 tooth max - Spring Tension Settings: 3 - Speed: 12-speed - Discipline: Off-road and Gravity In the box: - A complete OSPW X System for SRAM Eagle AXS - CeramicSpeed Bearing Oil in a 15ml dropper bottle

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features a 14-tooth upper and 18-tooth lower, aluminum pulley wheels with Grade 3 Silicon Nitride balls to provide absolute optimization of the rear derailleur Robust cage crafted from polyamide and carbon fiber for durability and light weight Compact cage design allows the use of the same length chain as stock pulleys Two spring tension settings allow customized setup based on ride conditions Only compatible with 1X specific derailleurs - XTR M9100-SGS/GS and Shimano XT M8100-SGS Coated bearing races increase bearing service life by increasing hardness of race and reducing corrosion

- Featuring FURTHER DRIVE Technology – consisting of two new tech features that are both aimed at making the OSPW X boost the Transmission group’s ability to perform efficiently over time. - Active Debris Remover (ADR) feature - a unique new dust cover design that sits safely anchored in a recess in the pulley wheel, thereby completely enclosing the bearing. This is paired with a bladed groove structure that surrounds the dust cover, and dynamically extracts debris from the pulley wheel while it’s rotating. - ADR is paired with the new 14-tooth and 20-tooth solid disc pulley wheels, simply known as the ALPHA. - The ALPHA Disc features a two-piece construction. A separate narrow-wide tooth profile produced in a composite material that offers prolonged wear protection and noise reduction. As well as a solid aluminum disc that eliminates the potential of external objects getting stuck between the spokes of the pulley wheel, while adding strength and stiffness to the Pulley Wheel design. - The FURTHER DRIVE Technology is combined with an entirely new cage structure utilizing increased material structure – without adding unnecessary bulk – that makes it perfectly in line with the robustness that the Eagle Transmission group is celebrated for. But the true value is found in the FURTHER DRIVE Technology’s ability to provide peak performance deep in races or in the season when riders need it the most. Faster now and faster down the line – Cover More Ground. In the box: Complete OSPW X System for SRAM Eagle AXS Transmission

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features 13-tooth upper and 19-tooth lower, aluminum pulley wheels with Grade 3 Silicon Nitride balls Robust cage crafted from polyamide and carbon fiber for durability and light weight Coated bearing races increase bearing service life by increasing hardness of race and reducing corrosion Two spring tension settings allow customized setup based on ride conditions Only compatible with SRAM Rival AXS 12-speed 36t cassette CeramicSpeed products with coated bearings include a lifetime warranty

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. The handbuilt OSPW System has two spring tension settings, that allows customised setup based on riding conditions. This OSPW System is also compatible with the 2020 11 speed SRAM Red eTap derailleur featuring a clutch. Note; While there are visual similarities with the SRAM RED/Force AXS derailleurs, this OSPW system is not compatible with the SRAM Rival AXS, or SRAM RED, Force, or Rival XPLR eTap AXS rear derailleurs. Please see our Pulley Wheels for SRAM AXS Road In the box: Complete OSPW System for SRAM Red/Force AXS CeramicSpeed Pulley Oil, 15 ml. dropper bottle Custom tool for removal of stock cage and securing of OSPW System.

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features a 15-tooth upper and 19-tooth lower, aluminum pulley wheels with Grade 3 Silicon Nitride balls to provide absolute optimization of the rear derailleur Robust cage crafted from carbon reinforced polyamide for durability and light weight Two spring tension settings allow customized setup based on ride conditions Fits cassettes from 10 to 36-tooth Coated bearing races increase bearing service life by increasing hardness of race and reducing corrosion Only compatible with SRAM RED AXS and SRAM Force AXS

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features a 14-tooth upper and 18-tooth lower, aluminum pulley wheels with Grade 3 Silicon Nitride balls to provide absolute optimization of the rear derailleur The narrow wide tooth profile ensures durable chain retention Robust cage is crafted from carbon reinforced polyamide for durability and light weight Three spring tension settings allow you to customize performance and reduce chain drag Fits 10-50 tooth cassette range Coated bearing races increase bearing service life by increasing hardness of race and reducing corrosion

Entirely developed, designed, and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM eTap is a huge technological advance for the cycling industry. Matching the highest quality materials with a unique design, the OSPW System delivers lower friction and longer lifetime, improving your competitive advantage. Thanks to the OSPW System for SRAM eTap, the power savings over OEM pulleys start at 40%, and the CeramicSpeed Bearings inside guarantee 3-5 times greater longevity compared to commonly used standard pulleys on the market. The watt savings with a CeramicSpeed OSPW System for SRAM eTap start at 1.6 watts. The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12-speed SRAM eTap AXS. If you have the updated 11-speed SRAM eTap derailleur featuring the orbit clutch, you will need the CeramicSpeed OSPW System for SRAM eTap AXS derailleurs. - The overall power savings of the OSPW System for SRAM eTap commonly reach 40%-60% over a stock setup. - The oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. - The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12 speed SRAM eTap AXS. - This 3D-printed titanium version of the OSPW System comes with our CeramicSpeed Coated Bearings for even longer service life and lower friction. In The Box: - Oversized Pulley Wheel System - CeramicSpeed Bearing Oil in 15 ml dropper bottle - Sticker sheet - IMPORTANT: When traveling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not fit safely in most bike travel bags and could be damaged if left on.

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features 15-tooth upper and 19-tooth lower, titanium pulley wheels with Grade 3 Silicon Nitride balls Titanium pulley wheels are 3D-printed and hollow for additional weight savings and durability Robust cage crafted from polyamide and carbon fiber for durability and light weight Two spring tension settings allow customized setup based on ride conditions Fits cassettes from 10 to 36-tooth Coated bearing races increase bearing service life by incre

Convert your R45D Gen. 2, and R45D Centerlock hubs to XDR. Conversion kit is complete with axle and all driveshell internals for a plug and play swap to your R45D Gen. 2 and R45D Centerlock hub. - Ceramic Bearings - Compatible with SRAM Red eTap AXS, Eagle AXS, and all XDR and XD cassettes. - Compatible with R45D 6-Bolt Gen.2 hubs. Serial numbers will begin with 6910. - Compatible with all R45D Centerlock hubs. - Available with stainless steel or ceramic bearings. - 142x12mm axle. - Available in Silver or Black

MOG is a noun, verb, acronym, and unequivocally a state of mind for those who push the boundaries of distance and rolling exploration. There’s no road too long, no course too tough for those willing to MOG. Modern gravel riders demand versatile durability, abundant tire clearance, and storage solutions. The MOG has all of it, and more. ENVE’s IN-Route System makes exposed hoses and cables a thing of the past. Coupled with sleek in-frame storage, and performance geometry, there’s no race too fast for the MOG.

Hawk Racing SRAM Derailleur pulleys are designed to be used with any SRAM 11 speed groupset.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. Compatibility - HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate - HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX - HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy - HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC - HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

Kogel Oversized Kolossos Derailleur Pulley Sram eTap Red/Force Sram eTap version fits 12 speed Sram Red and Force Etap AXS derailleurs Also compatible with (post Sep. 2020) Red eTap A2 11sp derailleurs with the Hydro Clutch, NOT compatible with the original (pre Sep 2020) 11 speed etap derailleur Besides reduced friction, this cage is built with shifting accuracy, gravel worthiness and chain retention in mind Long tooth profile on lower pulley offers best possible chain retention Lower pulley assembly features a chain catcher to prevent jams Can be used dependably on or off road Oversized 14 and 19 tooth Kogel pulleys SPECIFICATIONS Model: Sram eTap AXS Road Seals Size: 14/19T

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. The durable composite body features our iconic three-way wrench shape and prevents scratching of expensive components. Angled ends allow for safe installation and removal of Shimano Di2 E-tube EW-SD300; wires in tight spaces. Universal coin cell tool helps remove and install battery covers on SRAM AXS and other electronic accessories. - Compatible with Shimano Di2 E-tube, EW-SD300 wires (nominally 3 mm OD connector) - Not compatible with Shimano Di2 E-Tube EW-SD50 wires (nominally 5 mm OD connector) — use the Park Tool EWS-1