Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX landing page

Black Ops Lead Foot
$12.59 - $14.59
- Steel - Threads onto 3/8" axle - Knurled & grooved - Diameter: 33mm - Sold in pairs
Colony RX3 Rotary Upper Gyro Cable
$12.95
2016 Colony RX3 Rotary Gyro Cables. • Twin Upper Cable design.
Kink Incite Axle
$12.99
BMX axles take a lot of abuse, and sometimes they need to be replaced. Kink makes it easy by providing replacement parts like this Incite replacement Incite Axle.
Odyssey Gyro Upper Plate
$12.99
The Gyro upper top plate is designed for use with the Odyssey detangler.
Colony Stem Gyro Plate
$13.95 - $16.95
• Full CNC machined from 6061T6 Alloy. • Designed for use with our Official, Variant & Squareback stems. • Weight: 15 grams (0.52oz)
Shadow Conspiracy Little Ones Peg
$13.95 - $14.99
The Shadow Conspiracy Little Ones BMX Pegs are made from Heat Treated 4130 Chromoly that is then machined down internally to give you maximum strength with minimum weight. 4 inches long, 34mm in diameter and compatible with both 3/8 inch and 14mm axles, the Shadow Conspiracy Little Ones Pegs are also available in a number of bold colors. Sold as a single peg.
Shadow Conspiracy Little Ones Peg 4.33
$13.95
The Shadow Conspiracy Little Ones BMX Pegs are made from Heat Treated 4130 Chromoly that is then machined down internally to give you maximum strength with minimum weight. 4 inches long, 34mm in diameter and compatible with both 3/8 inch and 14mm axles, the Shadow Conspiracy Little Ones Pegs are also available in a number of bold colors. Sold as a single peg.
Odyssey Twisted PC Pedals
$13.99 - $19.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Odyssey Bluebird Chain
$14.99
For the Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
Shadow Conspiracy Raptor V2 Front Hub Guard
$14.99
7075 alloy, CNC machined with steel insert for durability
Subrosa Posi Trac Hub Guards
$14.99 - $34.99 $34.99 - $39.99 Up to 63% Off
Designed for use with the Posi Trac Cassette Hub
CULT Butter Light Peg 110mm Nylon
$15.99
Butter light pegs have an aluminum core with a Perlon-Nylon 6 sleeve. - Sold individually - 14mm peg with 3/8" adaptor - Color: Black - Length: 110mm - Diameter: 4
Demolition Trooper Plastic Pedals
$15.99
- Sold in Pairs - Designed With Team Input - 10 Square Molded Pins - Horizontal Concave for Grip - Nylon Plastic Body for Extra Life - 2 Unsealed Bearings - Heat Treated CRMO Spindle - 9/16? Size Only (Fits Three-Piece Cranks) - Weight: 14.5 oz (pair).
Odyssey MPEG 14mm Chrome Pegs
$15.99
The MPEG is a 4140 chromoly peg with three possible positions for longer peg life. - Sold as pairs - 4" x 1-3/8"
Odyssey MPEGs Steel Pegs
$15.99 - $19.99 $19.99 Up to 20% Off
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
Sunday Bikes Current Tire
$15.99 - $23.99
The Current Tire has a grippy tread pattern, good shape and tire width. It's an affordable tire designed to make it easier for beginner riders to upgrade their bike and keep existing riders on their bikes. Features - Grippy tread pattern - Affordable high-pressure tire - Also available in 20 inch and 16 inch sizes
Merritt BMX P1 PC Pedals
$17.00
The Merritt P1 Pedals have a low profile design that uses a special nylon/fiberglass blend that increases strength and extends pedal life.
Merritt BMX S.I.R. Peg 14mm
$17.99
The S.I.R. Pegs are made of 4140 chromoly that is first forged, followed by CNC machining, then finally heat-treated to increase strength, durability and performance. Built to last without being over weight. 37mm x 100mm and available for 10mm and 14mm axles. Specs: Length: 100mm / 4 Diameter: 37mm Axle: 10mm or 14mm Weight: 190g / 6.7oz
Odyssey Springfield Brakes
$17.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.
Rant Fix 'Em Crank Puller
$17.99
Designed to install and remove Rant Bangin’ 48 Cranks and all others that use 3/8” x 24 tpi spindle bolts. Pound ‘em off and press them back on. Easy as that! Heavy duty heat treated steel construction can take the abuse. Features: - Heavy-duty steel construction - 2-piece design for pushing and pulling - Compatible with 19mm 3/8” x 24 tpi spindle - Weight: 5.6 oz.
Rant Squad Tire 20x2.3
$18.99
The Rant Squad Tire is a great tire for all around use, from dirt to park to street. The Rant designed and exclusive tread design offers a large contact area with minimal rolling resistance. We also added micro- knurled surface for optimum performance and improved traction.The medium pressure rating helps cushion those big drops. The Squad Tire is ready to shred all! - Size: 20” x 2.35” - Low profile all around tread with micro knurling - Tire pressure: 35-60 psi - Weight: 27 oz
Odyssey HGS Spokes
$19.60 - $19.99 $19.99 Up to 2% Off
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.
Kink Mid Bottom Bracket Kit
$19.99
- Cones and spacers machined from 6061 aluminum - Includes 1mm, 2mm, 3mm and 4mm adjustment washers - Washer can be used inside and outside of bottom bracket for perfect chain alignment and bearing spacing
Mission BMX Tracker Tire 2.4
$19.99
The Mission Tracker tire is a more affordable modern tire that features a slick style tread design. A balanced rubber compound keeps you rolling faster while providing softer landings and plenty of grip. Thicker sidewalls reduce flats and improve your ride at lower tire pressures.
Odyssey Grandstand PC Pedals 9/16
$19.99
The Odyssey Grandstand Pedal has a low profile with a comfortable wide concave shape for better grip. There are also steel pins for extra grip. There is a large spindle with a thinner pedal for pro riders.
Odyssey Gyro G3
$19.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.
Odyssey MPEG 13mm Steel Pegs
$19.99
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm w/ 3/8's adapters included - 4? (length) x 1.3/8? (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
Odyssey Monolever
$19.99
The Monolever was an instant classic and has become a clear favorite with pro riders around the world because of its familiar feel, smooth edges and variety of handle options.
Odyssey R/F Series Pre-Load Bolt
$19.99
This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.
Odyssey Travel Tool 7-in-1
$19.99
Odyssey's first multi-tool includes all the key bits to assemble and disassemble your bike on-the-go. Includes a pedal wrench, 4, 5, 6 and 8mm hex wrenches and a 17mm socket with an integrated storage compartment. It's light and easy to carry, but big enough to allow you to actually tighten everything down properly. Features - 4mm, 5mm, 6mm, and 8mm hex wrenches - 17mm deep socket - Integrated storage compartment - Pedal Wrench (15mm and 17mm spanners included) - Full length arm for proper leverage - Most affordable compact BMX multi-tool