BMX landing page

Replacement Seat Clamp Bolt for Subrosa frames with a built in Seat Post Clamp. -4130 Cro-Mo -Heat Treated -Includes Nut / Bolt

- Sold in pairs - Allen wrench included

Replacement parts for Odyssey Grandstand Pedals. Left or Right spindle.

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

Need new pinch bolts for your Bangin’ 8 Cranks? 4140 Chromoly Heat Treated M7 x 1mm

Replacement hardware for all Sunday Freeze BMX stems. Comes in a pack of 6 bolts. -Thread: M8x1.25 -Length: 23mm -Head Diameter: 11mm -Wrench Size: 6mm Hex

Samox BMX crankarm pinch bolts. M6 pinch bolt

Samox BMX crankarm pinch bolts. M8 pinch bolt

Fits in any frame designed for 27.2mm posts and reduces to 25.4mm. Shim is 3? long and is slotted to allow seat clamp to tighten.

Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually

Need to replace your Sano Brakes Straddle Cable & Knarp? -Includes Straddle Cable, Knarp And Cable End -Customize To Fit -Compatible With Most U-Brakes

Square wood coaster with S&M logo. Made in USA.

Rookie bottom bracket from Salt, featuring stainless bearings. Includes all spacers and cones for adjustment

The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly

Stolen BMX branded stickers for your shop or for customers. - Perfect to slap onto a bike frame, notebook, helmet, or anywhere you wish

Seeley BMX Peg

Seeley BMX Peg

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

The SE Bikes Life donuts not only protect your inner thumb from abrasion, but they also add some unique style to your ride - Made from neoprene foam - 5mm thick

Foam neoprene donuts prevent blisters and discomfort associated with high flange BMX grips - Adorned with the SE Bikes wing logo - Available in a variety of colors

Slicker sleeves are plastic peg covers designed for use with Little Ones pegs. - Little Ones pegs lock into plastic sleeve - Injection molded composite construction - Sold each

Male bolts for G Sport hubs. For 14mm Axles, and featuring both 17mm wrench flats and 6mm hex broach

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

This pro-level spoke wrench is comfortable enough for doing daily full-on wheel builds and features G-Sport’s proprietary taper-hex nipple slot on one side and the traditional 3.2 (Zero/Black) spoke nipple slot on the other. Made from chromoly steel. Dual sided interface for greater versatility Taper-Hex slot delivers superior torque to G-Sport Taper-Hex nipples 3.2 (Zero/Black) slot works with traditional BMX spoke nipples Tough chromoly construction fights everyday wear and tear

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Features -Short, Medium, or Long to fit a range of handlebar sizes -Fits most detangler systems -Designed specifically for GTX-S and G3 Gyros

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

Brakes are only good as the cable - The Spring Brake Cable features a straight linear style housing that reduces compression, increases braking response and overall stopping power. Won’t kink up on bar spins. And they also feature a Teflon coated inner wire for a smooth pull.

Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance. - 160mm lenght - Par Ends Included

- Press fit designed to work the hub's non-drive side collar.

New Sunday Wax in puck shape.

Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends

How are we going to see that work if your slippin' off the pegs? Don't worry Theory has you covered with pre-cut hassle free installation grip for your pegs. All the traction you need to keep you on them pegs flexin' those combos. 4.5" x 4.5"

- Full lever grip that protects the entire lever and your body in a freak accident - Insulates the lever from extreme cold - Makes the lever easy to reach and grab offering unique modulation - Protects the lever from scratching other bikes and from damaging the lever itself - Stays sticky in inclement weather

The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.

The G.L.A.N.D. MKV builds on this hub guard's long-running history of protecting the spokes and hub while using the strength of the wheel lacing for structural support. The G.L.A.N.D. is made from proprietary plastic to keep the weight low and to spread impacts evenly while grinding - with as little resistance as possible. The updated design attaches to the wheel via easily sourced self-tapping Phillips-head screws and the G.L.A.N.D.’s fold-over locking tabs that keep the guard centered and firmly seated on the spokes. Super light, super affordable, and will fit most 36-H front hubs with a 3-Cross lacing pattern.

Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.

The Rant Have A Bike Day (H.A.B.D.) Grips are a simple and straightforward classic mushroom style grip. Constructed of proven DCR rubber, theH.A.B.D. grips are stylish, comfortable and durable grips. Ribbed for your hands pleasure…

The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.

Linear style cable provides stiffer braking & resists kinking. Tons of colors. Go ahead and start stopping. -Linear style cable provides stiffer braking and resists kinking -5mm Teflon lined linear housing -50? long -1.6mm Teflon coated inner wire -Alloy ferrules for durability

Brandon Begin signature flangeless grip from Cult made from a sof Krayton compound rubber with a thin diameter. Bar ends included.

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

Cornerstone Grip features a ribbed design with Cornerstone logo. - Includes Odyssey Par Ends

The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort. - 160mm

- Soft Vex Krayton Rubber to be Soft & Durable - Durometer: 25º - Diameter: 28.7mm - Flange-Less Length: 150mm

- Steel - Threads onto 3/8" axle - Knurled & grooved - Diameter: 33mm - Sold in pairs

Mike Hoder’s signature grips are made in the USA by ODI from a Super Soft compound for the feel Mike wanted. At 31.5mm they are a little Bigger Than Most to help cushion some of Hoder’s infamous landings.

This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology. - Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated. - Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008. - Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables. - Gyro lug included at one end of the inner wire for use with detanglers. - 60-65mm in length. - Black

- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.

The Springfield lever features an easy to install and remove design. - Easy to install and remove without having to wrestle grips on and off - Die-cast clamp design

Odyssey's new Travel Wrap. Throw it into your backpack and you're good to go. Velcro enclosed main compartment Two smaller pockets Strap and buckle

The SE Wing grips feature a classic and comfy mushroom pattern with the SE Wing logo embedded for extra grip. The raised outer flange is debossed with “We Make it Happen” and is sure to keep your hands in place. Key Features: Made from comfortable Pruven rubber compound 135mm length Includes SE rubber end caps Available in black, white, red and blue

Byron Anderson is an OG Shadow rider and product designer extraordinaire. Back in the day, he designed the Shadow Ol’ Dirty Grip as his signature grip and it was one of our most popular grips. So we got together with Byron and have brought it back with updated features and constructed it with our durable and soft DCR material. Opposing rib cells provide excellent feel, durability, and grip. Guaranteed to be your favorite grip again.

The Gipsy grips 160mm length and proprietary rib design give it the feel and circumference of a stretched grip right off the shelf, while symmetrical ends allow the grip to be installed in either direction depending on rider preference. A performance grip for a high performing rider!

The Maya grip features a proprietary DCR formula material in a honey comb pattern.

Aaron Ross signature keyboard grips. - Aaron Ross signature hand picked emoji pattern - Par Ends included

Aaron Ross signature keyboard grips. - Aaron Ross signature hand picked emoji pattern - Par Ends included

Warnin' grips from Odyssey BMX. - Gary Young signature - Dual compound for comfort and durability - Par Ends included Flange: No Lock On: No Grip Shift Specific: No Length: 165 mm Shape: Round