Parts & Accessories

Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place

Rear end cap conversion kits for NoTubes Neo and Neo Ultimate hubs - SealLock end caps feature a low friction U-cup seal that snaps into place

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Thin yellow tape that creates an air tight seal for tubeless applications and can also be used as standard rim tape. - Thin, lightweight tape is designed to provide and airtight seal for tubeless setups - Suitable for use as rim tape in non tubeless application

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Switching to tubeless or in need of valve replacements? Serfas Tire RX replacement valves will do the trick. Available sizes of 32mm, 44mm, or 60mm valves with removable cores, extra valve core, and Schrader to Presta adapter with core removal tool. Please note, Due to the multi-step chemical process and variables involved in anodizing, colors may vary slightly between batches produced.

Direct drive freehub for use with Saris Hammer and H2 trainers

Santa Cruz is rewriting the future of tubeless tire systems with the introduction of Reserve Fillmore, a completely new take on tubeless valves. This new, high volume design allows triple the airflow, while its revolutionary self-clearing poppet eliminates clogged valves. Finally, its threaded cap allows you to back-off and air down to the perfect tire pressure with micro-adjustable precision. Compatible with Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep High Flow: 3 X airflow makes seating and inflating tires a snap No Clog: Eliminates clogging and busts through dry sealant Micro-Adjust: Airs down to the perfectly dialed tire pressure Direct-Inject: Coreless design for no-fuss injection of sealant

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - One-piece design - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6 mm hex wrench required for installation

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer the highest quality, simple, lightweight alternative to that bulky handle. - This axle is compatible with bikes that have a Focus R.A.T. thru-axle in the fork with 100 x 12mm front hubs. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types. - Easily snaps over your rims - Stretchy, tightly woven material provides a close fit and protects from abrasion - Sold as a pair - Not for tubeless set up

Authentic replacement freehub body for Ritchey V2 Apex and Zeta Phantom Flange road wheels - 11-speed Shimano

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.

- End caps for Origin8 FB-1100 fat bike hubs

Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

On today's road forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic road hubs to use 15mm axles - One pair required for each hub to be converted

- The Mavic Mountain Wheel Bag is constructed of a heavy-duty nylon. - The center of the bag has is reinforced rubber to protect the axles. - Every bag is equipped with handles and a pocket inside. - Works with mountain 24"/26" wheels. Each bag holds one wheel. Details: - Fits one wheel - Inside skewer pocket - Reinfiorced internal pads where the hub sits - Carries 24-700 C wheel sizes plus the tire

- The Mavic Speed Release axle stays on the wheel when removed from the bike and the indexed system allows a faster wheel change - The controlled torque enables the design of the right axle strength - The integrated torque control system ensures consistent tightening force during each use and the indexed system keeps the axle/wheel in the fork/frame when unscrewed - Only compatible with Speed Release frame and fork.

Replacement and conversion freehub bodies Complete freehub body kits with necessary parts to replace or convert your hub. Click on item to see what is included Freehub bodies fit Industry Nine 1/1 mountain rear hubs Includes: (1) XD freehub body shell, (1) bearing spacer, (1) 152610 bearing, (1) 15267A3 bearing, (6) 101 pawls, (6) 101 springs, (1) freehub body seal and (1) 101 freehub retaining ring

Industry Nine cartridge bearings are OE replacement bearings. Thickness: 7 Bearing O.D. (mm): 30 Manufacturer Number: 61903 Bearing I.D. (mm): 17

Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs. Kits include freehub, bearings, inner spacer, pawls, and springs Convert or replace your existing Hydra mountain freehub body with this complete MicroSpline kit. Includes everything you need to swap the freehub and get riding

Made in Asheville, NC, Industry Nine Hydra Classic Mountain hubs feature low weight, and large diameter disc flanges for braking torque transfer. Ideal for any style of mountain bike riding, from XC to DH. Features: - 12x148mm Boost Thru-Axle, Micro Spline compatible, Hydra freehub mechanism improves over previous Torch hub internals with multiple heads engaging for strength and quicker engagement - 32 hole, 6-bolt/44mm-BCD International Standard disc mounting dimensions - Featuring the Torch freehub, designed around a traditional flanged hub, Angled flanges for lower spoke stress and large diameter disc flange improves wheel stiffness and brake torque transfer - 6-pawl, 6-phase, 115-tooth drive ring with .52 deg between engagement points. Angled flanges for lower spoke stress. - Color: Gold - Weight: 286g

The Reynolds GW TR3 4-pawl Shimano HG freewheel body is compatible with Reynolds TR MTB wheels (2017-2021) and Reynolds AllRoad / Performance wheels (2017-2021). With its 4 pawls positioned at 0°, 90°, 180° and 270° and engaged simultaneously on the ring, the Reynolds GW TR3 4-pawl Shimano HG freewheel body limits friction when freewheeling and offers an engagement of 10 ° on a 36-tooth ratchet ring and 15° on a 24-tooth ratchet ring. Finally, the distribution of the load on 4 pawls simultaneously allows the Reynolds GW TR3 freewheel body to offer greater resistance to torque, especially for electric bikes.

- 14 gauge forged 7075 alloy with CNC finish - Matches Halo and Gusset anodized colors perfectly - Sold in bags of 50 - length: 12mm

- Replacement drivers for Original DJD or DJD-Bush Drive rear hub - Use HL-3195 for DJD Original removal tool, HL-3196 for DJD Bush Drive removal tool - For replacement pawls and springs for DJD Supadrive Hubs, use HL-3273

- Rear axle replacement kit, 10mm nutted, DJD-SupaD - Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible - DJD and DJD-BD parts are generally not cross compatible

ABI Standard Design Cartridge Bearings. 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed Specs: -Thickness: 9 -Material: Steel -Bearing O.D. (mm): 30 -Manufacturer Number: 6200 -Bearing I.D. (mm): 10

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

ENVE Endcap for Campy 7 -12 Speed Rear Hub

SILCA valve stem extenders for tubular tires and tubes with removable valve core. ENVE recommends that the length of your tire/tube valve + the length of your extender exceeds the depth of the rim by at least 10mm. - The 34mm set is optimized for the SES 3.4 and SES 3.4 Disc - The 45mm set is optimized for the SES 4.5 and SES 5.6 Disc - The 75mm set is optimized for the SES 7.8 and SES 7.8 Disc

Valve stem extenders for tubular tires and tubes with removable valve core. Sold as a set of two extenders.

Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes

Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads

- Extra security against theft - 5mm hex CrMo axle

DT Swiss 2-in-1 dropper or suspension lever with Double Stage remote.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Maximum stiffness and highest safety—the RWS Quick Release for road and MTB. Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. It's the perfect choice for anyone who is looking for maximum performance and safety.

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Thread Pitch: 12 x 1.0mm

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

R45 Driveshells are compatible with R45, R45D, and R45D Centerlock rear hubs. Driveshells are available bare without internals or complete, ready to be lubed and installed.

Convert your R45D Gen. 2, and R45D Centerlock hubs to XDR. Conversion kit is complete with axle and all driveshell internals for a plug and play swap to your R45D Gen. 2 and R45D Centerlock hub. - Ceramic Bearings - Compatible with SRAM Red eTap AXS, Eagle AXS, and all XDR and XD cassettes. - Compatible with R45D 6-Bolt Gen.2 hubs. Serial numbers will begin with 6910. - Compatible with all R45D Centerlock hubs. - Available with stainless steel or ceramic bearings. - 142x12mm axle. - Available in Silver or Black

Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell and all driveshell internals for a plug-and-play swap. Micro Spline Driveshell Instructions - Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX - Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.

Campagnolo Axles

Bontrager XDR 12mm Drive Side Axle End Cap - Upgrade or refresh your Bontrager wheels - Rear - 142mm OLD - Black

Bontrager Aeolus Pro Front 5mm QR Conversion End Cap Kit - When it's time to refresh your trusty wheelset, Trek genuine replacement parts have you covered - QR conversion end caps - Compatible with Bontrager Aeolus Pro front wheels with DT Swiss 350 hubs - Front - 100mm OLD - Sold as a kit

Bontrager Aeolus Pro Rear 5mm QR Conversion End Cap Kit - When it's time to refresh your trusty wheelset, Trek genuine replacement parts have you covered - QR conversion end caps - Compatible with Bontrager Aeolus Pro rear wheels with Shimano 11-speed Road freehubs - Rear - 135mm OLD - Sold as a kit

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with Bontrager Pro-level hubs

These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels

- High-quality replacement hub bearings for Bontrager System Wheels - 28mm x 15mm x 7mm

High-quality replacement hub bearings for Bontrager System Wheels. 30mm x 18mm x 7mm