Other

- From a long line of tough, light-weight chain engineering from SRAM - Coupling for 12-speed Sram Eagle chains - Chain connector type: PowerLock - Compatible with Sram Eagle SX, Eagle NX, Eagle GX, Eagle X01, Eagle XX1 models - No tools necessary to install - Color: RAINBOW - 50 Pack

Description This Müve Fit Bike accessory allows for quick and easy saddle changes, as well as fine-tuning of the saddle angle. - Internal side clamping cups with centering springs for easy saddle load and unload - Side cups rotate to accommodate standard 7mm cylindrical rails and 7x9mm carbon rails - Single 5mm hex bolt allows for quick clamping and pressure control - Angle lock nut secures desired saddle angle - 10-degree (+/-) saddle tilt range - No tools needed for tilt adjustment

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

- Aheadset preload adjusting bolt

Dia-Compe Star Nut for 1 1/8" Steerer (28.6mm)

Replacement small parts for Hope disc brake Hope disc brake calipers.

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Replacement piston and seals for Hope disc brake calipers.

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Crown Race MX - Size: MX TH 26.4mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Routes cables underneath the bottom bracket - Will not rust or corrode

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Rubber - Color: Black

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

- Crown Race - Size: 27.0mm

- Type: Lock washer - Size: 1" Keyed

Standard replacement star nuts for threadless steerers.

- Aluminum w/lock nut and mount - Slotted mount design

Replacement piston and seals for Hope disc brake calipers.

Hope Brake Lever Parts

Replacement piston and seals for Hope disc brake calipers.

-1/2 Link -Riveted construction

The Gyro G3 upper top plate is designed for use with the G3 detangler.

Shimano mounting bolts for flat-mount disc brake calipers. Bolts sold individually Attaches front or rear caliper to frame or fork mounting plate

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

Product details - Use in chainstay pocket to seal sensor into frame

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Standard steel replacement

Derailleur hanger attachment bolt for frames with thru-axle dropouts. Hanger is sold separately Size M3 x 12mm Thread pitch .5 Head type Counter

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains