Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
A neat little gadget, that is particularly interesting for anyone who likes to wrench on their bike.
Designed like an ordinary headset spacer, the Aimy slides onto the steerer tube and has a stainless steel bolt that clamps down so that the steerer tube cannot fall through your headset, once you take off your stem.
- Machined from aluminum
- Fits 1-1/8" steerer tube
- Thickness: 8mm
- Weight: 8g
These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium.
Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time.
Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off.
Clean, simple, and fast!
Replacement for Fox PN:
820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly
820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly
NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
- From a long line of tough, light-weight chain engineering from SRAM
- Coupling for 12-speed Sram Eagle chains
- Chain connector type: PowerLock
- Compatible with Sram Eagle SX, Eagle NX, Eagle GX, Eagle X01, Eagle XX1 models
- No tools necessary to install
- Color: RAINBOW
- 50 Pack
Description
This Müve Fit Bike accessory allows for quick and easy saddle changes, as well as fine-tuning of the saddle angle.
- Internal side clamping cups with centering springs for easy saddle load and unload
- Side cups rotate to accommodate standard 7mm cylindrical rails and 7x9mm carbon rails
- Single 5mm hex bolt allows for quick clamping and pressure control
- Angle lock nut secures desired saddle angle
- 10-degree (+/-) saddle tilt range
- No tools needed for tilt adjustment
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.60
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.00 - $15.38
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99 - $2.20
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.99
- Model: Derailleur Bolt & Nut
- Compatibility: Mounts rear bracket to frame
$1.99
Replace the top bearing in your YST8300 headset with these caged ball bearings.
$1.99
- Routes cables underneath the bottom bracket
- Will not rust or corrode
$2.00
FSA Mega Exo Small Parts.
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
- Covers brake hose fitting at the brake lever
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.25 - $2.99
$2.99
Up to 25% Off
Standard replacement star nuts for threadless steerers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.50
Shimano mounting bolts for flat-mount disc brake calipers.
Bolts sold individually
Attaches front or rear caliper to frame or fork mounting plate
$2.75
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$2.99
- Oversize 10mm
- Fits new style MTB & BMX levers
- Aluminum construction
$2.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
$2.99
Derailleur hanger attachment bolt for frames with thru-axle dropouts.
Hanger is sold separately
Size M3 x 12mm
Thread pitch .5
Head type Counter
$3.00
FSA Mega Exo Small Parts.
$3.00
FSA Standard Headset Bearings
$3.00
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$3.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC K710 and K710SL chains
- No tools needed
Page 1 of 38
Next page