Cables

Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable. - Length: 60 – 65mm - Black

Cables are coated with a durable low-friction polymer. - Dupont Tefzel coating is more durable than previous coated cables - Length: 2350mm - Diameter: 1.6mm - Double Ended: No

Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.

Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems. - Forged aluminum construction - Mounts to most frame mounting holes - Great for tricky cantilever brake setups - Lightweight design

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Dual Cable - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 7.5 – 9.5-inch - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 11 - 12.5" - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: X-Long - Diameter: 1.5mm

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Origin-8's Braze-On Cable Stop with adjuster allows you to convert to STI style shifters. They mount onto down tube Braze-on bosses and are machined alloy with an anodized finish. The lightweight design lets you make the conversion without adding too much extra weight. One pair per package.

- Stainless steel die-pulled and polished super-slick brake cable with electrolysis coating - Electrolysis coating offers an ultra-smooth surface finish that greatly reduces friction for outstanding braking performance - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm - Style: MTB

- Stainless steel die-pulled and polished superslick brake cable with electrolysis coating - Electrolysis coating offers an ultra-smooth surface finish that greatly reduces friction for outstanding braking performance - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm - Style: Road

Replacement parts for Jagwire's Elite Link kits keep things functioning as intended. - Extra links for long housing runs or replacing damaged sections - 20 links at 10mm of length each

Origin-8's Alloy Braze-on Inserts convert hydraulic pass-throughs to cable stops so you can run full length housing. Designed for frames with pass-through braze-ons and sold in a bag of 10.

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

A great replacement for OE cables and a perfect way to bring style to a bike, the 1x Sport Shift kits make it easy. They come with a weld-cut single-ended Slick Stainless cable for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This kit is designed for use on bikes with a 1x drivetrain with a rear derailleur or internally geared hub. - Single-ended shift cable is compatible with SRAM and Shimano shift levers for both road or mountain bikes - Sport Slick Stainless cable combines with a Slick-Lube housing liner to offer dependable shifting performance and durability - Includes everything needed for a complete shift cable and housing replacement for a rear derailleur or internally geared hub - OEM-level cables and housing with high-quality small parts

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Small flange for smaller hydraulic loops - 50-pack

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed adjustment for braided shift housing - Not recommended for use with brake systems - Size: 4.5mm

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the Road Elite Link Brake Kit

- Great for center-pull cantilever brake setups - Fits threadless fork steerer tubes - Includes barrel adjuster - 24mm cable stop drop - AL6061-T6 alloy construction

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

- Simple solution for frames that do not have housing stops - CNC aluminum with two housing stops per guide

- High-performance compressionless outer casing designed for precise and effortless shifting - A fully lubricated inner housing liner reduces friction and enhances lever feel - Stainless steel low friction inner cable - Recommended for 10-speed drivetrains - 10-speed or less shifting system recommended - Compatible with Shimano® and SRAM® shifting systems Includes: 2 x Sealed End Cap, Alloy/Black 8 x Open End Cap, Alloy/Black 6 x Cable Oring, Translucent (2 sets = 6pcs) 2 x Frame Protector, Mini Black 2 x Cable Tip, 1.2mm, Alloy/Silver

The Metallic Braid Brake Kit adds the perfect touch of class to any randonneur, touring, and city bike. Additionally, the housing is more compression resistant and tougher than plastic-coated housing. The cable housing has a thin clear plastic sheath to protect your bike's paint. 5mm diameter housing. These derailleur cable kits feature full length, high-quality lined housing for crisp shifting and easy installation. One bike's worth, includes: - 1x 4000mm lengths lined SIS-compatible 5mm diameter housing - 1x 2500mm length stretched stainless steel slick pre-stretched cable - 1x 2300mm length stretched stainless steel slick pre-stretched cable - 4 ferrules - 2 tips

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the 2x Elite Link Shift Kit

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.