Parts

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- 1/2x1/8" chain for Singlespeed and BMX

- Convert any vertical dropout frame with derailleur hanger to a singlespeed - Spring loaded arm keeps tension on chain, Pulley axle adjusts to optimize chainline - Chain retention hoop prevents chain derailment

A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 18mm high - Spindle diameter: 9/16-inch - Weight: 352 grams

The Cobrafist is constructed with a durable and wind resistant outer shell, 400g Primaloft ECO insulation and zippered vents, for comfort and control. · Two, simple and accessible, inner pockets for stowing extra food and gear · Handlebar attachment system includes a foam donut that seals the handlebar and cable closure, while also keeping each pogie in an upright position · Water resistant zipper vents on top and bottom provide temperature regulation · Outer shell constructed of 600 denier tear-resistant poly · 400g Primaloft ECO insulation with a 68D lightweight poly liner · Elastic drawstring wrist closure

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams

Machined in San Diego, CA, these round chainrings are made of 7075 aluminum SRAM 3-bolt Direct Mount fitment with 3mm offset for Boost chainlines Works with both SRAM and Shimano 12 speed chains Weight: 58g

Oval chainrings put down maximum power at the peak of your pedal stroke, allowing you to blast up and over tech chunky climbs 30t rings feature 12% ovality 32t rings feature less aggressive 6% "Almost Oval" Machined in San Diego, CA, these chainrings are made of 7075 aluminum SRAM 3-bolt Direct Mount fitment with 3mm offset for Boost chainlines Works with both SRAM and Shimano 12 speed chains Weight: 58g

Machined in San Diego, CA, these round chainrings are made of 7075 aluminum SRAM 8-bolt Direct Mount fitment Works with both SRAM and Shimano 12 speed chains Weight: 58g

- The All Around Pedal provides riders with more freedom of movement on the pedal and a less locked in feel. Ideal for the rider who likes to reposition their feet and make adjustments on the fly - Tons of grip when you need it, but a bit more movement when you want it, making the All Around Pedal an ideal choice for Trail, Park, Enduro, DH and Freeriding - Constructed from space-grade aluminum and featuring double-sealed bearings with 10 pins per side - Axle material: 17-4 stainless steel. Internals: 1 Igus bushing and 4 bearings - Platform: 106x110mm - Weight: 365g

5Dev's most aggressive and lightest pedal. At 343g, its low profile design, 24 pins and razor sharp 5 Axis Machined Design, makes it the ideal choice for the advanced rider looking for ultimate traction and performance from a flat pedal Features strategic pins and machined grooves to deliver optimal grip for aggressive riding Constructed from space-grade aluminum and featuring double-sealed bearings Axle material: 17-4 stainless steel. Internals: 1 Igus bushing and 4 bearings Platform: 106x110mm Weight: 343g Size: 9/16"

Steerer diameter: 1-1/8" Bar diameter: 35.0mm Rise: 0 deg Length: 32mm Color: Raw Ti - VRTS - Variable Radius Geometry - 2-bolt stem installs onto any rise bar without shims, scratches, or effort! Yes, it's easier to install vs a 4 bolt stem - Designed and machined in San Diego, CA - Weight: 133g with hardware

These cranks are engineered for aggressive Trail, Enduro/park and DH style riding. Ideal for charging steep technical chunk, ripping laps at your local park, or sessioning your favorite jump line Low profile crank arm reduces pedal strike during technical punchy climbs, allowing you to clean more sections of trail and get back up to take another lap with less effort Compatible with SRAM 3-bolt direct mount chainring interface Q Factor: 167mm for 52mm Boost (176mm for Super Boost+) 5 year warranty Weight: 525g

These cranks are engineered for aggressive Trail, Enduro/park and DH style riding. Ideal for charging steep technical chunk, ripping laps at your local park, or sessioning your favorite jump line Low profile crank arm reduces pedal strike during technical punchy climbs, allowing you to clean more sections of trail and get back up to take another lap with less effort Compatible with SRAM 3-bolt direct mount chainring interface Q Factor: 167mm for 52mm Boost (176mm for Super Boost+) 5 year warranty Weight: 525g

Super hardened steel designed for high torque Singlespeed and BMX use.

- Forged and CNC-machined aluminum with precision sealed bearings for 2-pc cranks and 24mm spindles - BSA 1.37"x24T for 68/73mm shells

Sealed Cartridge Bearing 6202

- Aheadset preload adjusting bolt

Replacement starnuts compatible with all headset systems.

- Aheadset preload adjusting bolt, cap and star nut - Bolt is hollow for cable pass-through

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm

Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps

Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...

- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains

This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

All-City Singlespeed Disc Brake Adaptor 

Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware

• M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Single-sided design

Doubles represent the ultimate in toe strap comfort and performance. You won't believe how much more secure and comfortable they are than traditional singles until you've tried them yourself. Suddenly toe clips will make perfect sense, and you'll be riding with newfound confidence. - Leather with steel hardware - Intended for use with double-strap toe clips (sold separately) - 114 grams per pair - 420mm length

Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included

612 Track rings are the perfect compliment to any 144mm B.C.D. crankset. They are made from 7000 series aluminum and feature a lovely and durable anodized finish. - BCD: 144 - Chain Compatibility: 1/2-inch x 1/8-inch

The 612 Track Crank is an extremely stiff and strong 144mm BCD track crank. It’s at home as much on the busy avenues of your city as it is on the boards of the velodrome. All-City sweats the details, so the 612 (Minneapolis’ area code) is cold-forged, resulting in a tight grain structure. The upshot is that it’s strong, which means more riding and less worries for you. It utilizes the classic JIS square taper spindle and comes with a color-matched, 46-tooth, 1/8th chainring.  - Recommended Spindle Length: 110mm - Spindle Interface Type: square taper JIS - Bolt Pattern: 5-bolt - BCD: 144mm - Chain Compatibility: 1/2-inch x 1/8-inch - Weight: 726g w/ ring and bolts - Bottom bracket and retaining bolts not included

Featuring a custom fork crown and elegantly curved blades inspired by classic randonneuring forks, the All-City Space Horse Fork comes outfitted with four-pack rack mounts to accept a variety of front rack styles. Signature fork ends accommodate 12mm thru-axles and flat-mount brakes, E.D. coating offers protection from rust, and a liquid black paint finish adds shine to its timeless silhouette. - 100% 4130 Chromoly tapered blades and matching signature fork ends - Custom-designed lugged fork crown, four-point rack mounts, stealth dynamo routing - 700c x 45mm maximum tire clearance; 41mm with fenders Specifications: - Brake Mount (Fork): Flat Mount 160 - Wheel Size: 700c - Brake Type: Disc - Crown Race: 30.0 - Steerer Type: Straight - Offset: 52 - Material: Steel - Steerer Tube Length (mm): 350 - Maximum Tire Clearance (Fork): 700c x 45mm or 650B x 47mm - Front Axle: 12mm Thru x 100mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Front Hub Spacing (mm): 100 - Axle to Crown Length: 395

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - 2000mm length

- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike

- 40mm long brake blocks with hardware to fit basic caliper brakes

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - 1700mm length

- Basic housing and galvanized inner cable with header card - Brake kit includes black casing and a 1.6mm cable - Derailleur kit includes black casing and a 1.2mm cable - Cables have dual ends with leads to fit any brake or shifter

- Basic housing and galvanized inner cable with header card - Derailleur kit includes black casing and a 1.2mm cable - Cables have dual ends with leads to fit any brake or shifter - Cable diameter: 1.2mm - Casing diameter: 5mm

- 72mm long molded brake blocks with hardware to fit most linear brakes

- 72mm long molded brake blocks with hardware to fit most linear brakes

- Thermally bonded PTFE-coated slick galvanized cable for minimal friction - 2000mm

- 72mm long molded brake blocks with smooth post for common cantilever brakes

- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses

- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses

- Thermally bonded PTFE-coated slick galvanized cable for minimal friction - 1700mm

- Aluminum guides for securing housing/tubing to frame cable stops or cable guides

- Slotted aluminum barrel adjuster with backing nut for common brake levers

- 72mm long forged aluminum holder with hardware to fit most linear brakes - Replacement inserts include retention pins, fit most 72mm aluminum holders

- Lightweight stainless steel rotor, Great for all-Mountain or enduro use - International standard 6-Bolt 44mm bcd rotor mounting. 95/112/154G

- Ultralight stainless steel rotor, ideal for XC use - International standard 6-Bolt 44mm bcd rotor mounting. 56/70/82G

The Rat Trap pedals feature a nylon based plastic construction with a wide, slim body. - Chromoly spindle with unsealed bearings - Additional corner pins to reduce slipping - 9/16"

Animal Luv seat features a mid-sized base, padded surface with durable kevlar-style cover. Embroidered Animal Griffin Head logo. - Branded Animal mounting eyelet - Clamp Style: Pivotal - Material: Synthetic

- 7050 aluminum strong enough for aggressive Trail, Enduro and Downhill - Gradually tapered bends make this 35mm bar look like a traditional 31.8 bar - True-Sweep geometry eliminates the need to roll the bar forward 800mm length, easily cut-to-fit any riding style

Cork wrap is really a lot of foam with cork chunks mixed in. It's thick and softens road vibration. It can soak up moisture yet remains easy to grip. It's durable and easy to install. It holds color well and doesn't fade. You can wash it like you wash the car; soapy rag, scrub, rinse, repeat.

Gecko Grip is EVA foam and ventilated polyurethane in a laminated, layered construction. Gecko Grip has a rubbery, "grippy" feel compared to cork tape. It lays flat on the wrapped bars and is thinner than cork. It doesn't absorb sweat as easily as cork and can be wiped off with a wet rag in seconds.

Rubber Gecko is a cushy bar tape made with foam and an outer layer of natural rubber. Rubber Gecko offers a soft tactile grip with a bit of give to it. It wraps slightly fatter than our original gecko grip, but not by much. Perfect for the rainy, cold cobbled classics.

Art Gecko is Arundel's new grippy polyurethane rubber bar tape with a colorful artistic pattern on the drops. This pattern is called a tri-color tessellation. When wrapped from the bottom it fades to black about where the brake levers mount.