Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX

The S&M Chain Saw Sprocket is made in the USA from 6061 aluminum. It features a 15/16" bore, 3/32" teeth for compatibility with standard BMX chains, and includes adapters to fit 19 and 22mm bores. Available in a range of tooth counts from 30 up to 44.
Formerly known as the GNS pedals, the S&M BTM pedals have been adopted by legend Mike Hoder to become his signature model. They feature a large ergonomic shape with a micro-knurled surface and 15 molded pins per side that are designed for grip and support. The long lasting nylon/fiber blend is also perfect for sliding. The oversized chromoly spindle can accept a 6mm Allen, 15mm, or 17mm wrench for installation/removal. Note: 1/2" fits 1-piece cranks. 9/16" fits 3-piece cranks. Specifications: Platform Size: 103 x 98mm Platform Material: Nylon/Fiber Blend Spindle Size: 9/16" Spindle Material: Chromoly Pins: 15 per Side Color: Black Weight: 14.3 oz
The Hoder SkyHigh Bar, just in case the Hoder and Hoder High bars don’t get you high enough. RISE: 9.5? WIDTH: 31? UPSWEEP: 1.5° BACK SWEEP: 11° CROSS BAR: .75? WEIGHT: 2.70 lb (.083?)
The S&M No Exit freestyle bar is Chris Child's signature bar and pairs tried and true angles with classic S&M tubing for outstanding strength and feel. The No Exit incorporates a slightly narrower box section than the Hoder High bar for folks that turn up for clicked turndowns. Specifications: Rise: 9.125" Width: 29" Backsweep: 11° Upsweep: 2° Crossbar Height: 6.5" Crossbar Width: 11" Color: Flat Black Weight: 38.4 oz
S&M Bikes 7/8" aluminum seatpost. Made in USA out of 6061 T-6 Aluminum .120" wall, approximately 12" in length For frames that use a 7/8" (22.2mm) seatpost Anodized BLACK Minimum insertion 4" Made in the USA! Please keep in mind that this 7/8" seatpost size is made as a replacement part for bikes that were made in the 70's through the 90's. Bikes back then were made for kids and teens. If you are an adult, with a body larger than you were when you were a teen, you may have the ability to bend this seatpost while riding. It's made from strong alloy here in the USA, but it still can bend under certain conditions of use. Therefore, no warranty is given on this item.
$5.99
Fits in any frame designed for 27.2mm posts and reduces to 25.4mm. Shim is 3? long and is slotted to allow seat clamp to tighten.
$6.00
Square wood coaster with S&M logo. Made in USA.
$12.95
Mike Hoder’s signature grips are made in the USA by ODI from a Super Soft compound for the feel Mike wanted. At 31.5mm they are a little Bigger Than Most to help cushion some of Hoder’s infamous landings.
$44.99
Slim padding on Slim size base with hollow bolt and S&M Shield patch. Weight: 9.90 oz.
$49.99 - $64.99
The Drainman – it’s an excellent sprocket. It’s an S&M bikes sprocket. You can ride it every Saturday, or everyday really, just not on Mondays, definitely not on Mondays. - CNC machined 6061 Aluminum - 1/8? teeth, 15/16? (24mm) center bore - 19 and 22mm steel hat washers included - Compatible with 19mm, 22mm and 24mm spindles
$59.99
Clint Reynolds and Co. wanted to tweak the classic Challenger stem to suit their brand of riding. The result is the Turtleneck: a 6061 T-6 aluminum CNC machined stem that’s a hair longer and narrower, with an internal cutout that lightens it up.
$64.99
- CNC machined 6061 Aluminum - 1/8? teeth, 15/16? (24mm) center bore - 19 and 22mm steel hat washers included - Compatible with 19mm, 22mm and 24mm spindles - Features 2 crank mounting holes
$79.95
S&M Perfect 10 Bars are made with the tallest riders in mind. Produced in the USA from 4130 chromoly with a 10" rise, 30" width and a 3/4" cross bar. Made in the USA 4130 Chromoly Rise: 10" Width: 30" Backsweep: 11° Upsweep: 1.5° Crossbar Height: 7" Crossbar Width: 12" Weight: 43.5 oz
$84.99
The S&M Hoder bars are the Mike Hoder signature model featuring a 2-pc design made from post-weld 4Q Baked heat-treated chromoly with a large box area and a 19mm cross bar. Rise: 9" Width: 30" Backsweep: 11° Upsweep: 1.5° Crossbar Height: 6.625" Crossbar Width: 11.375" Weight: 35.9 oz
$89.99
Inspired by the classic Motomag wheel with a vintage look and modern S&M American quality. Made in USA CNC machined 6061 T6 Aluminum Available in 30,33,36,39 and 44T 3/32? teeth, 15/16? (24mm) center bore 19 and 22mm steel hat washers included
$99.99
Width: 29" Upsweep: 1.5° Backsweep: 10° Crossbar: .75" Weight: 2.68lbs 9" , 2.73lbs 10" Material: 4130 CrMo
$209.99
Specifications: Axle to Crown Height: 320mm Steerer Tube Length: 173mm Bearing Race: Integrated Offset: 26mm Compression Bolt: 24x1.5mm Compression Bolt Tool: 6mm Allen Key Weight: 36 oz (26mm Offset)
$7.99
The SE Bikes Life donuts not only protect your inner thumb from abrasion, but they also add some unique style to your ride - Made from neoprene foam - 5mm thick
$7.99
Foam neoprene donuts prevent blisters and discomfort associated with high flange BMX grips - Adorned with the SE Bikes wing logo - Available in a variety of colors
$12.99
The SE Wing grips feature a classic and comfy mushroom pattern with the SE Wing logo embedded for extra grip. The raised outer flange is debossed with “We Make it Happen” and is sure to keep your hands in place. Key Features: Made from comfortable Pruven rubber compound 135mm length Includes SE rubber end caps Available in black, white, red and blue
$13.99
- Form meets function with these comfy SE Bikes Life Grips - The soft Pruven rubber compound allows long days of riding without hand fatigue - Includes SE rubber end caps
$26.99 - $36.99
- Fast rolling, smooth profile tire with inverted tread comprised of the SE Wings logo and textured surface - The perfect tire for ripping up the streets with the crew and displaying your latest wheelie skills - MPC - Durable long life compound that is designed to be functional on all terrain types
$26.99
The SE Bikes padset not only offers additional protection, but also allows you to customize your ride Includes matching top tube, handlebar and stem pads Double velcro width on top tube pad helps to fit securely on various frames 11.8" long top tube pad 10.8" long handlebar pad Tetoron construction
$26.99
The SE Racing wing logo is emblazoned boldly on this classic 3pc padset Includes matching top tube, handlebar and stem pads Double velcro width on top tube pad helps to fit securely on various frames 11.8" long top tube pad 10.8" long handlebar pad
$31.99
A collaboration between Vee Tire and SE Bikes, the Cub tire features a classic BMX tread pattern blended with that bold SE styling. The square V-knobbies have been strategically placed for ultimate grip and traction. - 26 x 2.0" - Wire bead
$34.99
- Knurled steel pegs in various colors to match your style - Compatible with 14mm or 3/8" axles with included adapter - Sold as a pair
$172.99
Landing Gear forks are the most popular BMX forks of all time. Built with the same full Cr-Mo strength as the originals, these forks will withstand anything. Key Features Full Cr-Mo legs & steerer tube Fork leg ends stamped with SE logo 24 inch: 2lb 15oz
$6.25 $11.99 48% Off
Rookie bottom bracket from Salt, featuring stainless bearings. Includes all spacers and cones for adjustment
$18.99
Rookie bottom bracket from Salt, featuring stainless bearings. Includes all spacers and cones for adjustment
$75.99
The Haze v2 top load is made from forged alloy and features a CNC machined Stranger logo on the side. Specifications: Reach: 50mm Rise: 30mm Once got 12 retweets Weight: 10.8oz
The Subrosa Speed Sprocket is a 100% CNC machined, 7075-T6 sprocket that is designed to resemble a classic shape with the strength and weight that modern riders demand. The unique 10 spoke design retains strength while also reducing weight. Subrosa left a large amount of material around the outer profile to help maintain the shape during impacts. This 6mm thick sprocket is built to take it!
$2.99
Replacement Seat Clamp Bolt for Subrosa frames with a built in Seat Post Clamp. -4130 Cro-Mo -Heat Treated -Includes Nut / Bolt
$19.99
The Subrosa "Combat" light is bright enough to be seen from up 1950 feet away, but is also small enough to be easily taken on and off and put in your pocket when not in use. Soft silicon keep it impact resistant, and a smaller strap length makes it fit on all types of BMX bars. Riding without lights is illegal in many cities, so cover yourself with one of these light sets! Available in a front and rear set, or individually. White bulb for front. Red bulb for rear. - LED light that is visable up to 1950 feet. - Covered with a durable water resistant silicone body. - 14 lumen light provides 38 hours of steady light or 175 hours of flashing light. - Flashing light provided in 3 different light modes: steady, fast flash, & slow flash. - Powered by 2 coin cell CR2032 batteries (batteries are included widely available for replacement). - Weight: 24 grams.
$29.99
Following the design of many motorcycle and car tires from the hot rod days, the all-new Subrosa Sawtooth Tires combine today's technology and materials with yesterdays tried and true tread pattern. The goal was to create a very smooth, very round tire that kept contact with the ground if you are drag racing in a straight line, or leaning hard into a carve. The tread pattern gives just enough traction to stick on dirt also. These bad boys are wide, smooth and durable.
$37.99
Matt Ray signature Designer Tires. Featuring a super round tread design and a soft grippy rubber compound these tire with grip everything from the wood at the park to the cement of the streets. 2.4 width means they’re just the right width to handle Matt sized street gaps and drops, and also high pressure to handle flairs at Matt heights!
$39.99
With the new look of Matt’s signature MR2 frame, Subrosa had to do a seat to match! Strap on this mid-sized pivotal seat and like Matt, RIDE ALL TERRAINS.
$39.99
This is a first for Matt Ray and Subrosa. His signature seat has just been added to the range of Subrosa seats for BMX bikes. This seat goes together with his signature frame like salt & pepper. It has a design that hints at Matt's taste for the finer things in life - Just like his frame. REMIX REMIX! Same popular Designer pattern in an all new shape & size for the Matt Ray fans and those who enjoy the finer things.
$39.99
This is a first for Matt Ray and Subrosa. His signature seat has just been added to the range of Subrosa seats for BMX bikes. This seat goes together with his signature frame like salt & pepper. It has a design that hints at Matt's taste for the finer things in life - Just like his frame. It is designed with a MID size padding, a 3-panel design, double stitched seams, and made from a high-quality vinyl fabric with inlaid kevlar threads for durability.
$39.99
The Subrosa Thrashed Pivotal Mid Seat is a mid sizes seat for comfort with a cool 'Thrashed" Look. Works with Pivotal seat posts only!
$71.99
Subrosa pro Simone Barraco wanted a sprocket that was strong enough to handle his creative, and constant abuse. The 8mm thick Barcelona sprocket allows for it to take hit after hit without bending or deforming, and also fits the Shadow Interlock Supreme Chain.
The Sunday Slim Seatpost Clamp is a removable, ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. 2014-T6 aluminum construction Replaceable hardware Self-aligning nut Standard 1-1/8? size
$4.99
Replacement hardware for all Sunday Freeze BMX stems. Comes in a pack of 6 bolts. -Thread: M8x1.25 -Length: 23mm -Head Diameter: 11mm -Wrench Size: 6mm Hex
$10.99 $11.99 8% Off
The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.
$20.00
Replacement parts for Sunday Saker v1/v2 Cranks. -19mm Spindle -For Saker and OEM 3-PC style cranks. -Spindle bolts not included.
$29.99
The Current Tire has a grippy tread pattern, good shape and tire width. It's an affordable tire designed to make it easier for beginner riders to upgrade their bike and keep existing riders on their bikes.
$29.99
Jake Seeley's signature tire. This directional tire uses a dual compound to withstand any abuse you can give it. The center tread features a softer durometer while the side tread offers a harder grind friendly durometer.
$79.99
The Saker Cranks are designed to be an affordable 3-pc crank with tubular chromoly arms that have a single pinch bolt design. It uses a 19mm chromoly spindle with 8 splines. The cranks include a 19mm Mid BB with spacers. RHD/LHD compatible. Comes in black or chrome. Features - Tubular CRMO 3-PC - 175mm -RHD/LHD compatible - Includes mid-sized bottom bracket
Team tested & designed heavy duty street tire. Extremely sticky and durable rubber compound, plus a more aggressive side tread for long life resistance.
$5.99
Need to replace your Sano Brakes Straddle Cable & Knarp? -Includes Straddle Cable, Knarp And Cable End -Customize To Fit -Compatible With Most U-Brakes
$7.99
Slicker sleeves are plastic peg covers designed for use with Little Ones pegs. - Little Ones pegs lock into plastic sleeve - Injection molded composite construction - Sold each
$10.99
Linear style cable provides stiffer braking & resists kinking. Tons of colors. Go ahead and start stopping. -Linear style cable provides stiffer braking and resists kinking -5mm Teflon lined linear housing -50? long -1.6mm Teflon coated inner wire -Alloy ferrules for durability
$12.99
Byron Anderson is an OG Shadow rider and product designer extraordinaire. Back in the day, he designed the Shadow Ol’ Dirty Grip as his signature grip and it was one of our most popular grips. So we got together with Byron and have brought it back with updated features and constructed it with our durable and soft DCR material. Opposing rib cells provide excellent feel, durability, and grip. Guaranteed to be your favorite grip again.
$12.99
The Gipsy grips 160mm length and proprietary rib design give it the feel and circumference of a stretched grip right off the shelf, while symmetrical ends allow the grip to be installed in either direction depending on rider preference. A performance grip for a high performing rider!
$12.99
The Maya grip features a proprietary DCR formula material in a honey comb pattern.
$20.99
The Shadow Conspiracy Little Ones BMX Pegs are made from Heat Treated 4130 Chromoly that is then machined down internally to give you maximum strength with minimum weight. 4 inches long, 34mm in diameter and compatible with both 3/8 inch and 14mm axles, the Shadow Conspiracy Little Ones Pegs are also available in a number of bold colors. Sold as a single peg.
$20.99
The Shadow Conspiracy Little Ones BMX Pegs are made from Heat Treated 4130 Chromoly that is then machined down internally to give you maximum strength with minimum weight. 4 inches long, 34mm in diameter and compatible with both 3/8 inch and 14mm axles, the Shadow Conspiracy Little Ones Pegs are also available in a number of bold colors. Sold as a single peg.
$20.99
The Revive wrist support features a 4-way stretch elastic with a Stabalite buttress support to aid in preventing hyper-extension. - One size fits most
$22.99
The new Shadow Surface Pedal is made with performance and function in mind. Starting with a wider and longer, slim platform. The wide 105mm x100mm platform is specifically shaped to be thin and stiff while still offering an overall concave shape.Added advanced micro knurling and 12 pins per side for a maximum grip that still allows foot adjustments mid-shred. Made with the same proven nylon composite material as the Ravager pedal, with a heat treated chromoly axle that includes a 6mm broach for ease of installation and high end looks. - Injection molded nylon composite body - Heat treated 4140 chromoly broached spindle - 105mm length x 100mm wide - 3.5mm pin height - 12 pins per side - Thickness: 18mm and 24mm at bearing cover
$22.99
The new Shadow Surface Pedal is made with performance and function in mind. Starting with a wider and longer, slim platform. The wide 105mm x100mm platform is specifically shaped to be thin and stiff while still offering an overall concave shape.Added advanced micro knurling and 12 pins per side for a maximum grip that still allows foot adjustments mid-shred. Made with the same proven nylon composite material as the Ravager pedal, with a heat treated chromoly axle that includes a 6mm broach for ease of installation and high end looks. Injection molded nylon composite body Heat treated 4140 chromoly broached spindle 105mm length x 100mm wide 3.5mm pin height 12 pins per side Thickness: 18mm and 24mm at bearing cover
$29.99
Strategically designed impact foam. Breathable, lightweight lycra body.