Brake Caliper Type: Post Mount Mount | Rotor Size: 160 Post | 200 Rotor , 140 Post | 180 Rotor
Cane Creek 40-Series EC(External Cups) assemblies feature press-in cups with bearings outside the frame. The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. - Color: Black. - Weight: 65. - Crown Race: 33. - Bearing Type: Cartridge. - S.H.I.S Lower: EC44.
Cane Creek 40-Series. The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. - ZS44/28.6EC44/30
Crank Brothers steps up to the plate to provide downhillers, freeriders and BMXers with one sweet platform pedal. Most flat pedals have the traction pins' hex holes on top, making them very difficult to remove if they break or are worn down. The 5050 3s have removable plates so you have full freedom to customize pin location for your preference and the terrain. Additionally, this puts the pin's hex-hole location on the back of the plates, making them easy to remove after heavy duty use. The 5050 3 pedals are crafted from 6061-aluminum with a chromoly spindle and utilize sealed needle and cartridge bearings for durability and low maintenance.
A seat post should be installed, easily adjusted and perform, period. For this reason we made one of our own. Lightweight, easily adjusted, strong and comfortable the ENVE Seatpost is equally at home on the trail as it is on the road. - Material: Carbon Fiber - Hardware Material: Titanium - Diameter: 27.2 mm - Saddle Angle Adjustment: 0-27 degrees - Offset: 0 mm - Length: 400 mm
A seat post should be installed, easily adjusted and perform, period. For this reason we made one of our own. Lightweight, easily adjusted, strong and comfortable the ENVE Seatpost is equally at home on the trail as it is on the road. - Material: Carbon Fiber - Hardware Material: Titanium - Diameter: 31.6mm - Offset: 25 mm
The FSA Orbit Z headets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36 degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap
- Some are designed to work in specific tooth combinations; see specific compatibility at individual part number bullet point - S9/C10 is compatible with Shimano 9 speed and Campagnolo C10 10-Speed
FSA Pro Track 48t x144mm Black Chainring 1/2"x1/8" FSA Pro Track Chainrings are CNC Machined AL7075/T6 with laser-etched logos. · Requires 1/2"x1/8" chain
Fabric's Line saddle uses a split, single piece, full-length pad with a central relief channel to decrease pressure on the pudendal artery. The Line is supremely comfortable for those longer days in the saddle. Integral pressure relief channel -Extended pressure on the pudendal artery can lead to discomfort and numbness. The Line saddle amply supports the sit bones with lightweight foam padding and relieves pressure through the addition of a central relief channel. Clean lines & high performance -A unique process bonds a waterproof microfiber cover and foam padding to a flexible nylon base. This results in a sleek looking, easy clean, performance saddle that doesn’t compromise on comfort. Flexible nylon base -The base of the Line saddle is durable and hard wearing yet built to flex in line with rider movement, ensuring comfort throughout the ride. -Width: 134mm -Length: 270mm -Base: Nylon -Rail: Hollow Titanium-alloy -Upper: Lightweight PU foam -Cover: Waterproof microfibre
Ergonomically shaped to the contours of the hand, with minimal bulk. Silicone material for optimal comfort and grip.
On the cutting edge of innovation, FOX delivers the new 32 Factory SC. With a Step-cast chassis, the lower casting has been reshaped to save weight and make more room for brakes and spokes. It features an EVOL air spring for added plushness, and a tapered steer tube for reliable and sturdy handling. The Kashima coated stanchions are extra buttery smooth, and magnesium lowers save weight. The FIT04 and GRIP three-position damper offer precise control over changes in terrain, and the lockout gives you optimal efficiency when needed. The fourth generation of FOX’s FIT closed cartridge system gives you high and low compression adjustment and rebound adjustment, all while maintaining low friction seals and low viscosity damper oil for improved rebound performance. The FLOAT EVOL air spring features a patented air transfer port system with more linear spring curve to provide added plushness and more tunable bottom-out progression. The EVOL system increases negative air spring volume, positioned and sized specifically for excellent sensitivity on small bumps. - 100 3 Pos-Adj - Kabolt 110 1.5 T - 44mm Rake - AM
The Fox Transfer Lever 2x/3x bar mount for left or right sits how we most commonly think of dropper post levers, and provides clean integration with any shift system. For use with the Fox Transfer Dropper post.
- Remote lever and cable sold separately. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Two remote options: left side below bar (for 1x) or left/right on bar (for 2x/3x)
A forged aluminum crown and 34mm carbon legs give the Rock Solid its sharp tracking characteristics while balancing stiffness and weight. - 34mm carbon legs - Forged alloy crown and dropouts - Disc only with 160mm post mounts - Max rotor size 185mm Axle to Crown Length: 445 mm Brake Mount (Fork): Post Mount 160 Color: Carbon Crown Race: 30 Defined Color: Black Front Axle: 9mm x 100mm Material: Carbon Wheel Mount Center Offset (mm): 0 S.H.I.S. Stem Clamp Diameter: 28.6 Steerer Type: Straight Steerer Tube Length (mm): 250 mm Weight: 740 g Wheel Size: 26" , 27.5" Rotor Size (Fork): 203 Maximum Tire Clearance (Fork): 3.8
Aluminum clamps secure the grip on both ends using hex wrench. Loosen pinch bolts and grips slide on or off with ease. 130mm length for standard shift/brake setup (not for twist shifters = use 90mm replacement grip options for twist shifters). Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs.
Replacement Chainrings for PowerTap C1 power measuring systems - 5 bolt, 110 BCD compact design - Must replace with same chainring combination to measure correctly - Note: when replacing PowerTap C-1 chainrings, you must replace with the same range or sensor will have to be sent back to PowerTap for recalibration - This kit does not include a sensor - Ring Position/Type: Outer , Inner - Drivetrain Speeds: 11 - Color: Black - Material: Aluminum
Purpose built extension optimized specifically for below the basebar mounting. The ergonomic S bend featuring a higher rise reduces fatigue while maintaining an aerodynamic position. L1 Bracket. Designed to get low, the L1 bracket sits at 35mm of stack placing the rider in a more aggressive riding position. F-19a Aluminum Armrest. 4 position fore/aft adjustment along with 15 of rotational adjustment to dial in the fit. Velcro-backed EVA Foam pads affix directly to armrest without additional straps. - Extension Adjustment: 220mm-320mm - Clamp: Fits 26.0mm and 31.8mm bars - Extension: V2+ Aluminum - Extension Adjustment: 175mm-310mm - Weight: 490g
The Carbon streem II features an extremely aggressive wing-shaped top section that saves watts while performing an incredibly comfortable hand position for cruising uphill. The drops feature a traditional bend-the choice of many Ritchey-sponsored pro riders. - UCI compliant 43.5x16mm wing-shaped top section cuts through the wind - Gentle sweep to tops and broad platform-great for seated climbing - Internal cable groove-no need to tape all the way to the stem - No-slip grit at stem and brake lever clamp areas
Based on the Guide brake design, Level brakes have smaller levers and are lighter. A great choice for XC and All Mountain riders. TLM: Tooled reach adjust, Lightweight forged lever, Monobloc caliper. FRONT: - Requires TL6940, Bleeding Edge Tool, for performing any bleed work - Forged body, forged lever blade, bushing lever pivot - Caliper has Heat Shield feature to reduce brake fade, 21mm pistons and adjustable hose routing - Bleeding Edge design for easier maintenance - Includes steel-backed organic pads REAR: - Requires TL6940, Bleeding Edge Tool, for performing any bleed work - Forged body, forged lever blade, bushing lever pivot - Caliper has Heat Shield feature to reduce brake fade, 21mm pistons and adjustable hose routing - Bleeding Edge design for easier maintenance - Includes steel-backed organic pads
Easy to install on any frame; compatible with all SRAM road 22 speed cranks, cassettes and chains. - Includes two 160mm Centerline two-piece six-bolt rotors - Brake moonting adaptors, if needed, are sold separately TECH SPECS - Shift Levers: Red eTap HRD - Front Derailleur: Red eTap - Rear Derailleur: Red eTap - Brake Calipers: Red eTap HRD - Brake Rotors: 160mm Centerline Compatible Components: SRAM road 11-speed cassettes, cranksets, and chains
Easy to install on any frame; compatible with all SRAM road 22 speed cranks, cassettes and chains. Complete your groupset by adding rim calipers, cranks. chain and cassette Includes: - Red eTap Front Derailleur w/ Battery - Red eTap WiFli Medium Cage Rear Derailleur w/ Battery - Red eTap Right Shifter for Cable Brakes - Red eTap Left Shifter for Cable Brakes - eTap Battery Charger and Power Cord - USB Stick and QuickStart Guide
The X-Glide 11-speed Chain Ring was designed using the same upshift rivets that are used in SRAM's fast shifting XX mountain group set. This makes for smooth movement between front gears when using one of its Yaw derailleurs. The X-Glide chain rings were CNC machined using 7075-T6 aluminum which means that every aspect of the chainring receives precise control of shape and ramp. The chain rings are 5mm thick which gives them added stiffness. Although sold separately, the chain, chainrings, and front derailleur are designed as a single integrated system and in doing so, SRAM ensures that you'll always be in the gear your legs need. The SRAM X-Glide 11 Speed Chain Ring comes in two sizes: 50 and 52-ttoth. They both feature a 110BCD.
SRAM X-Sync Pulley Assembly, Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs - Original equipment rear derailleur pulleys. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
SRAM's X0 10-speed compatible Grip Shift shifters are here to write the next chapter in Grip Shift history. Three rows of ball bearings provide silky-smooth shifts and full metal indexing keeps shifting crisp and precise. They feature an aluminum housing that’s light and strong, and an integrated lock-on grip that provides a seamless transition to the shifter.
A quiet bike is a beautiful thing. With SRAM's X0 Type 2 Rear Derailleur you'll hear the wind rushing past, the crunch of knobbies biting into dirt and the buzz of your freehub. SRAM's Type 2 technology eliminates chainslap, derailleur bounce, and other drivetrain racket. The roller bearing clutch keeps the chain tensioned for consistent shifting and is virtually maintenance free. The tech continues with an aluminum/composite construction, SRAM's 1:1 actuation ratio and direct cable routing for quick, reliable shifts. Plus, the Cage Lock feature gives you super easy rear wheel removal and installation.
Experience the precise, positive feel of SRAM with their X7 Trigger Shifters. They're perfect for casual and serious riders alike thanks to their aluminum and composite construction that both reduces weight and boosts strength. And, the X7s feature SRAM's 1:1 actuation ratio for the ultimate in crisp shifting.
When SRAM began developing XX, they were looking to create the lightest, most precise and technically advanced components possible, and boy have they delivered! The XX Front Derailleur is crafted from forged aluminum and steel to ensure a ridiculously low weight, while still delivering the precision and durability SRAM is known for. Plus, this beauty has been painstakingly engineered to throw down the fastest and smoothest front gear changes you've ever experienced.
Designed to deliver on race day without the traditional discomfort of race saddles, the Selle SMP T4 Tri Saddle will keep you comfortable, focused, and ready for the transition that lies ahead. Ideally suited for triathlon training, riding, and racing, the T4 Tri saddle offers a high amount of padding in a well-sculpted package. The black saddle is covered in real leather for long-term durability, comfort, and some serious street cred. Designed for narrow to medium-wide pelvises, the foamed elastomer keeps you comfortable and well padded, while the patented free central channel delivers in the comfort category. Being a tri-specific saddle, it is about 20mm shorter than their standard saddle, has optimized the conformation of the rear depression, and includes a rear hook that is optimized for the bike parking tube frame at transition areas. A beak-nose and raised rear offer an aerodynamic touch as well as a comfortable pelvic position. Keeping weight to a minimum are the stainless steel saddle rails.
V-Brake lever set for Alivio T4000 Color: Black
Page 1 of 170 Next page