Gauges & Patch Kits

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

• Secures frame pump to frame • Nylon • Also good for use as a watch band

90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.

Replacement gasket for reversible brass chucks, modern Impero Frame Pumps, and Pocket Impero

Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

Bag of 3 replacement washers for EVA heads on all SKS floor pumps

The Pro Digital Pressure Checker makes it easy to ride with optimal pressure with highly accurate readings. - Pressure release button for fine tuning - Measures from 0 to 11 bars (0 to 160psi) - For both Schrader (without brass insert) and Presta valves

Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.

- Allows you to upgrade floor pumps to accept Prestacycle attachments - Spin-On presta head with pressure release option, USA-made 36" hose and hose clamp are included

Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.

- Comes with Dual Head - Compatible with all Planet Bike floor pumps - #1002-5 Auto head with hose can be used as a substitute for this item and is compatible with all pumps that used the dual head

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.

Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.

One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again! Self-contained tire repair kit includes: - 5 tubeless repair plugs - 2 Presta core valves - Integrated valve core removal tool - Small, strong plugger tool - Alloy weatherproof storage capsule

Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

Mounting Kit for Mountain Morph and Turbo Morph G.

Replacement parts for JoeBlow Pro and JoeBlow Booster.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure. Specs - PUMP HEAD COMPATIBILITY: Presta / Schrader pumps - TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves - GAUGE: Digital, 300 psi / 20.7 bar - UNIT: psi, bar, kg / cm2 - BATTERY: CR2032 x 1 (included) - THUMB LOCK: Aluminum - PRESSURE TUNING: Air release button - BODY: Aluminum / Engineering grade polymer - SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7” - WEIGHT: 102 g / 3.60 oz Added Features: - Rotatable head / gauge - Auto-off function

This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz

Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.

Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

An aluminum air chamber with inflator head that stores an air charge of one liter, up to 200psi / 14 bar. Works with a floor pump to quickly fill your tires and ensures proper installation on a tubeless rim at home. Once you flip the selector from "CHARGE" to "INFLATE" mode, air bypasses the chamber as you use the floor pump to inflate your tire to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves - Air Chamber: One liter, Store up to 200psi / 14 bar air pressure (Varies with the pump capacity) Working Pressure - 1800psi / 124 bar - Material: Aluminum / Rubber / Engineering grade polymer - Flexible hose - Weight: 985g / 2.17oz (Total) 820 g / 1.81lb (Air chamber) - Hose Length: 26 Size - 36 x 11.4 x 8.6cm / 14.2" x 4.5" x 3.4" (Total) - 28.5 x 8.1cm / 11.2" x 3.2" (Air chamber)

Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.

Upgrade any pump to the TwinHead pump head.

- Ball-inflating needle for footballs, basketballs and more

Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.

- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm

Replaces worn end on any pump hose. - Head Type: Schrader

• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps

Rebuild kit for the HP floor pump. - Compatible with Air Tool HP floor pump. - Includes O-ring, lube, and grommet.

Keep your Air Tool Pro floor pump working fantastic with this replacement head and hose.

- Head/Hose for Air Tool UHP pump

Rebuild kit for the MTB floor pump. - Compatible with Air Tool MTB floor pump. - Includes O-ring, lube, and grommet.

Rebuild kit for our most common Air Tool floor pumps. - Compatible with Air Tool Pro, Comp, and Sport floor pumps. - Includes O-ring lube and grommet.

Direct replacement head and hose for Comp MTB and HP floor pumps. Also works with Sport floor pump. - Replacement head and hose for most Air Tool floor pumps. - Compatible with Air Tool MTB, Comp, HP, and Sport floor pumps.

Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.

Replacement UHP head O-ring seal

The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.

n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.

This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass

- Digital pressure gauge - Fits both Schrader and Presta valves - Digital screen

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

Head Washer for 2371 Head

Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves

Have an old pump lying around that doesn't work with the standard Presta valves? This is your solution! Built to convert your old schrader pump into a Presta pump!

Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads

Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.