Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Riser

TruVativ Hussefelt Riserbar
$46.00 - $56.00
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ Stylo T20 Riserbar
$30.00
TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
Thomson MTB Carbon Cross Country Handlebar
$150.00
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Thomson MTB Carbon Trail Handlebar
$179.95
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Sunlite Long Horn Cruiser Handlebar
$14.99 - $74.99
Chrome plated long-horn style design.
Sunlite MTB/City Handlebar (Aluminum)
$14.99 - $34.99
Lightweight aluminum construction with a versatile riser bar design.
Sunlite Medium Hi-Rise
$25.00 - $29.99
- Slightly shorter version of the popular hi-rise style - Available in chrome plated and black versions
Spank Spike 800 Race Bar
$74.90 - $79.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
Spank Spike 800 Vibrocore Bar
$99.00 - $99.90
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos
Spank Spoon 35 Bar
$69.99 - $74.99
A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike
Spank Spoon 800 Bar
$54.90 - $69.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
Spank Spoon Bar
$35.90 - $39.90
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos
Salsa Rustler Deluxe Handlebar
$75.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 7050-T6 series aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 330g - Note: Rustler bars are not compatible with bar ends
SQlab 30X 12-degree Aluminum MTB Handlebar
$99.99
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable, as well as the lightest, bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter
Ritchey WCS Trail 10D Rizer Handlebar
$74.95
With a lifetime of experience of riding and winning on trails and racecourses around the world, the Ritchey tradition of designing ideal handlebars continues with the introduction of the WCS 10D Rizer. Taking inspiration from the original XC 10D flat bar, this 800mm-wide trail bar offers a generous 10° backsweep for perfect wrist alignment, 4° upsweep to reduce pressure on the outside of the hand, and 20mm rise for optimum positioning. All of this combines to deliver a uniquely comfortable and controllable mountain bike experience. Whether ripping your favorite trails from Moab to Houffalize or your local runs, the Ritchey WCS 10D Rizer bar will help deliver a lifetime of great mountain bike experiences. - Material: triple-butted 7050 alloy - Width: 800mm - Rise: 20mm - Backsweep: 10° - Upsweep: 4° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 350g
Renthal Fatbar 35
$84.95 - $84.99
- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics
Renthal Fatbar Carbon
$164.95 - $168.95
- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
Renthal Fatbar Lite Carbon 35
$168.95 - $176.95
- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid
Renthal Fatbar V2
$84.99 - $88.95
- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction
Race Face Aeffect Handlebar
$49.99
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°
Race Face Aeffect R Handlebar
$54.99
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°
Race Face Atlas 35 Riser Handlebar
$79.99 - $89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
Race Face Atlas Riser Handlebar
$67.99 - $79.99 $79.99 Up to 15% Off
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Race Face Chester 35 Rise
$46.74 - $54.99 $54.99 Up to 15% Off
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design
Race Face NEXT 1/4-inch Riser Carbon Handlebar
$124.99 - $149.99 $149.99 - $179.99 Up to 26% Off
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 5 mm - Bend: 8 deg - Weight: 175 g
Race Face NEXT 3/4-inch Riser Carbon Handlebar
$139.99 - $169.99
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep; 3/4 Risers have a 4deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 20 mm - Bend: 8 deg - Weight: 175 g - Width: 725 mm
Race Face NEXT 35 Riser Carbon Handlebar
$169.99 - $179.99
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
Race Face Next R 35 Handlebar
$169.99 - $179.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
Race Face SixC 35 Handlebar
$174.99 - $184.99
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control
Race Face Turbine R 35 Handlebar
$79.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color
Pro Tharsis Trail Di2 Riser
$219.99
The Tharsis Trail Di2 riser handlebar is constructed of strong UD carbon and is ideal for all-mountain and trail riding. It offers maximum control in rough terrain and a clean cockpit setup, with Shimano Di2 internal cable routing and battery integration.
Pro Tharsis XC Flat Top Di2 Handlebar
$219.99
- Lightweight UD carbon construction - Cuttable bar-ends - Matte carbon finishing - Weight 160g - Di2 compatible with internal wire routing - 720mm wide - 31.8mm clamp diameter - 5mm rise
Giant Comfort Handlebar Alloy
$12.00
- Ideal for fitness and comfort cyclists - A great replacement handlebar
Giant Comfort Handlebar Steel
$12.00 - $13.00
- Ideal for fitness and comfort cyclists - A great replacement handlebar
ENVE M6 Mountain Handlebar 31.8mm
$170.00
Simply put, it’s the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
ENVE M7 Mountain Handlebar 35mm
$170.00
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
ENVE M9 Mountain Handlebar 31.8mm
$170.00
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
Chromag BZA Handlebar
$95.00 - $181.00
Big, burly and bad! DH strength without the weight. - Unidirectional carbon weave - Up to 25% lighter than aluminum counterparts - Stiff with excellent vibration damping for those long descents 35mm clamp - Extensively tested and proven design, carbon bars you can trust 15mm, 25mm and 35mm rise options
Chromag Cutlass
$181.00
All Mountain / XC The Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 780mm. 220g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features a 25mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. The geometry of this bar now matches our OSX perfectly.
Chromag Fubars FU40 Handlebar
$95.00
The FU40 Hi-Rise handlebar features a specific wall profile optimized for the additional length and torque that corresponds to its shape. Made from premium quality 7000 series alloy for the best strength to weight ratio, the FU40 is ideal for freeride mountain biking. - Custom drawn 7000 series alloy - Intended use: Trail to DH Material: Alloy Width: 800mm Upsweep: 5mm Back Sweep (deg): 8mm Bar Clamp Diameter (mm): 31.8mm Rise: 40mm Weight: 330g
Chromag Fubars OSX Handlebar
$95.00 - $102.00
Chromag's original all-of-the-above riding style handlebar, the Fubars OSX offers multiple colors in a DH ready package that fits equally as as well on a Trail bike. Material: Alloy Width: 800mm Upsweep: 5 Back Sweep (deg): 8 Bar Clamp Diameter (mm): 31.8 Rise: 25mm Weight: 325g
Whisky Parts Co. Winston Bar
$200.00
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds. - Compatible with road, mountain, and bar-end controls - Tested to ASTM 3 - 90mm clamping area to fit Salsa Anything Cradle - Can be ridden in up or down position - Unidirectional carbon fiber construction - Weight: 250g
TruVativ Descendant Downhill Riser Handlebar
$70.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
Thomson MTB Aluminum Downhill Handlebars
$110.00
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
Thomson MTB Titanium Riser Handlebars
$389.00
Upgrade the front end of your favorite ride with Thomson's MTB Titanium Handlebars. Besides being light, stiff, corrosion-proof and incredibly durable, titanium damps vibrations for comfort making easy work of rough and challenging terrain. Install these sweet bars on your daily ride, race rig or trail-crusher and enjoy them for years to come.
Thomson Trail Handlebar
$110.00
Thomson's Trail bar is 750mm wide with 20mm of rise. The clamping area is 50mm wide, allowing a different bend profile for a more compliant ride. The Trail bar is designed to give you a lightweight aluminum all-around bar no matter your riding style. - Backsweep: 8° - Upsweep: 5° - Material: Aluminum
Syncros AM1.0 CB Mini Rise Handlebar
$179.99
AM1.0 Carbon bars utilize a 35mm clamp diameter and are crafted from high modulus carbon fiber to ensure precise and confident steering, even in the most demanding terrain. The larger diameter clamping area reduces stress, increases stiffness and reduces weight. The optimized carbon layup all but eliminates vibration and harsh trail feedback, while the 10mm rise and 9° back-sweep put you in a perfect attack position. - Carbon UD - Up Sweep: 6° up - Back Sweep: 9° back - 12mm Mini Rise - Clamp Diameter: Oversize 35mm
Syncros Hixon iC DH 800mm Bar/Stem
$349.99
For 2020, we took our iC (integrated Cockpit) concept and applied it to downhill to produce a light, stiff, and strong one-piece cockpit for the ultimate in downhill speed. At 300g in 800mm width, it's not only one of the lightest bars available, but integrating the stem removes a huge amount of weight from the bike, while the one-piece construction allows us to reinforce key areas to inspire confidence where it is needed. Our carbon engineers worked on the layup to find the perfect balance of stiffness—not too harsh, not too soft, but just right. - Carbon UD - Up Sweep: 5° up - Back Sweep: 8° back - 15mm Rise - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: Direct Mount - Weight: 300g
Surly Cheater Bar
$85.00
The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel. - Material: Cromoly steel - Clamp diameter: 31.8mm - Width: 780mm - Rise: 0mm - Sweep Angle: 11 degrees - Color: Clear Coat Silver and E.D. coated Black - Weight: 400g
Surly Sunrise Handlebars
$65.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black
Surly Terminal Handlebar
$80.00
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise
Spank Oozy 35 Bar
$99.00
- Lightweight 780mm wide handlebar for Trail or All Mountain riding - Big and burly 35mm barclamp - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g - Diameter (mm): 35 - Rise (mm): 25 - Length (mm): 780 (adjustable to 740) - Geometry (deg°): 5° up x 8° back - Finish: Shot peen anodized
Spank Oozy Trail 780 Vibrocore Bar
$99.99
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos
Spank Spike 35 Vibrocore Bar
$99.99 - $109.00
- DH and Freeride, ultra-wide, 820mm wide handlebar - Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Weight optimized and adjustable to 760mm Features: - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight: ±300g - Diameter: 35mm - Rise: 25mm - Length: 820mm - Geometry: 5° up x 8° back - Finish: Shot peen anodized, decal logos
Spank Spike 777 FR Bearclaw Bar
$99.00
- Freeride handlebar, developed with Darren “Bearclaw” Berrecloth - Unprecedented stiffness and durability at an exceptionally low weight. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 747mm - KEY TECHNOLOGIES: Dual XGT, CNC Bending, Impact Ends, MGR - MATERIAL: MGR 2 series alloy - WEIGHT (g): ±340 (15mm) / ±350 (30mm) / ±390 (50mm) - DIAMETER (mm): 31,8 - RISE (mm): 15 / 30 / 50 - LENGTH (mm): 777 (Adjustable to 747) - GEOMETRY (deg°): 4° up x 8° back - FINISH: Shot peen anodized, decal logos
Soma Clarence Bar
$59.90
- Unique multi-use bar with excellent ergonomics - Shot peened 6061 aluminium - 2" forward bend from clamp area negates the need to change stems to make up for the grip area sweep. - 1.5" rise for ideal positioning - Bars can be flipped for another take on moustache bars
Soma Oxford Bar
$53.90
- 6061-T6 polished aluminum handlebar, similar to Torrington North Road - Compatible with MTB-style levers and grips - Clamp diameter: 25.4mm - Width: 21.3" (540mm) - Rise: 2.0" (51mm)
Salsa Guide 35.0 Carbon Handlebar
$160.00
Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence. - Bar Clamp Diameter: 35.0mm - Color: Carbon - Width: 760/800mm - Rise: 10/20/40mm - Back Sweep (deg): 8 degree - Upsweep: 5 degree - Material: Carbon
Salsa Rustler Handlebar
$40.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 374g - Note: Rustler bars are not compatible with bar ends
SQlab 30X 12-degree Carbon MTB Handlebar
$199.99
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter
Page 1 of 2 Next page