Frames

Jake Seeley's signature frame is designed to complement his progressive, technical street riding. The Street Sweeper evolves directly from Jake Seeley’s original Broadcaster frame by using shorter chain stays, a steeper head tube angle, a taller bottom bracket and smaller hollow dropouts with integrated chain tensioners. Built with versatility in mind, the Street Sweeper features removable u-brake hardware and Gyro tabs. The frame’s front triangle makes use of traditional round Nightshift style top and down tubes with proven internal gusseting. KEY FEATURES 100% 4130 Chromoly Frame Nightshift style, double-butted, top and down tubes with proven internal gusseting. Integrated seat clamp Butted Seat Tube & Miter Cut Top Tube: A miter-cut top tube creates a precise joint with the seat stays during welding. This increases the strength substantially over frames that use a “sandwiched” top tube at this critical junction. Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. They are both angled on the inside for improved chain clearance and weight savings. Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in position and to simplify wheel removal. Removable Brake Hardware: Proven, removable, brake mounts and cable guides/stops work flawlessly when installed and allow for a sleek overall look when they’re not. GEOMETRY Top Tube Length: 21" Head Tube Angle: 75.25° Seat Tube Angle: 71° Chainstay Length: 12.70-13” Bottom Bracket Height: 11.7” Standover: 8.8” Tire Clearance: 2.4” Head Tube Length: 4.7” Weight: 5lbs

The Born to Mob or BTM frame is Mike Hoders signature frame from S&M. The BTM Frame is designed more for the street ride and features a short back end, low BB height and butted true temper super therm tubing for great strength but still only weighing in at 4.6lbs. The BTM also has an integrated headset, top and downtube open end gussets for extra strength, externally machined Mid BB shell, an integrated seat post clamp, strong tapered seatstays with bosses for removable brake mounts (sold separately), 7/8" diameter chainstays, tubular stay braces with a super cool BTM engraving, and 5mm thick 4Q-Baked dropouts.