Your Search: "tacx"

The Neo 2T has improved performance, better sprints and high-end pedaling analysis making a leading bike trainer even better. Quiet, vibration free operation, better climbing, realistic feel and pedaling analysis, the Neo 2T provides an optimal indoor workout. You will train with accurate metrics, tackling climbs and challenging other riders all from the comfort of your own home. The Neo 2T has an improved beefed up motor and magnets to better handle sudden changes in speed whether you are sprinting or tackling rough climbs with a realistic feel of outdoor cycling. The Road Feel feature replicates a variety of road surfaces, so you can ride on cobblestone, smooth asphalt or gravel all while never leaving your home. Neo 2T simulates grades of up to 25% and the Descent Feature kicks in a motor assist to replicate the exhilaration of blazing downhill. You can fine tune your pedal stroke utilizing ANT+ or bluetooth connectivity with a variety of third-party applications by relaying info through every stroke of the pedal. You can use this data to optimize the power your legs provide to the pedals, giving you the edge on long rides and climbs. The Neo 2T supports Bluetooth and ANT+, allowing connection to an array of compatible smartphones, tablets, laptops, bike computers and sports watches. You can choose from a variety of Tacx workouts and videos when you are ready to hit the virtual road. The Neo 2T trainer outputs accurate power, cadence and speed data, plus provides pedaling analysis so you can improve your technique. Neo 2T is compatible with Zwift, TrainerRoad, and all other popular training apps. FEATURES: · Type of trainer: Interactive Smart direct drive with motor brake · Magnets: 32 Neodymium magnets · Transmission: None · Electrical requirements: 110-240 Volt , Mains power optional · Power indicator : Multicolor LED , Spot on floor · Connection indicator (ANT/BT): 2 LEDs · Firmware upgradeable: Yes · Suitable cassettes: Shimano & SRAM: 8-12 speed. Campagnolo, SRAM XD and XD-R body sold separately. Not suitable for Specialized SCS system · Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148mm. Adapter for 135 x 10 mm available. · Supplied with: Front wheel support , Quick release for road bikes and mountain bikes (5mm) , Direct drive quick release with adapter set 142x12mm & 148x12mm , 1 month Tacx Premium software SPECIFICATIONS: · Max. power (40 km/h): 2200 Watt · Max. incline: 25% · Simulation of descent: Yes · Max. torque: 85 Nm · Max. brake force: 250 N · Flywheel: Virtual · Mass inertia: Variable to 125kg (275.6lbs) · Calibration: No calibration required · Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) · Height: 550 mm (21.7 in) · Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) · Weight: 21.5 kg (47.3 lbs) · Article number: T2875 DATA OUTPUT AND CONTROL: · Wireless communication: ANT+ FE-C, Bluetooth Smart open · Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone , Tablet · Output: Cadence, Power, Speed · Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet · Accuracy: <1%

The "T" in the NEO 2T Smart stands for "torque" and the Neo 2T has more of it. It is the most powerful and silent indoor trainer to date. It is the only real direct drive as it does not contain any physical transmission like a roller or belt. The NEO 2T is also the only indoor trainer that can simulate different types of road surfaces. Real direct drive trainer with a powerful motor placed directly onto the cassette, eliminating additional gearing Even quieter than the Neo 2 Smart: redesign of internal components Measure speed, left & right power and cadence Pedal stroke analysis via the software of your choice Improved electronics Low revolutions, reduces noise to a minimum Foldable and compact frame design Can be used completely wireless or hooked to a power outlet Bluetooth and ANT+ FE-C capable Maximum resistance 2200 Watts Realistic climbing up to 25% and downhill to -5% Simulate real road pattern such as cobblestone, ice and concrete plates Comes with Shimano/SRAM compatible freehub body (Except SRAM XD and XDR). Campagnolo, SRAM XD and XDR bodies sold separately (890732) Directly compatible with all rear axles, except 135x12 and 135x10 (adapter needed) Front wheel support included Powerfully Built NEO 2T Smart is able to deliver during the most intense training sessions. Its design integrates 32 neodymium magnets that allow for a high brake force and high power levels. It can resist sprints up to 2,200 watts and simulate climbs up to a 25% incline. And it generates energy from your own cycling movement, meaning there’s no need for an external power source or a plug. No matter how intense your workout, this bike trainer is built to last. The rear axle has also been redesigned, making this trainer compatible with more bikes — without the need for adapters. Accurate and Reliable The NEO 2T Smart trainer is designed to provide a reliable, accurate and consistent measurement of your speed, cadence and power, so you can keep track of your performance and progress. This smart trainer doesn’t require calibration, and it measures your data with a maximum deviation of 1%. Fully Connected The trainer communicates via BLUETOOTH® Smart technology and ANT+ FE-C protocol, making it compatible with a number of popular training apps. Ride a famous cycling route in the Tacx software, take on the virtual worlds of Zwift, or use other platforms such as TrainerRoad. You can also use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance. Connect to multiple devices simultaneously, so you can enjoy the software while tracking performance on your Garmin bike computer. Train Your Way NEO 2T Smart harnesses the innovative power of the Tacx indoor training software. Enjoy your time in the saddle with a library filled with more than 100 high-quality videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Bologna. Take advantage of efficiently structured training plans, designed for your fitness level to help you meet your unique goals. Race against live opponents, upload GPS data and ride on 3-D maps, create your own workouts based on slope, power, heart rate or FTP, and show off on Strava.

The pinnacle of indoor bike training, the Tacx NEO Smart, is made even better. On top of immersive features like Road feel, Dynamic Inertia and Descent simulation, this new direct drive also features Pedal stroke analysis. It is without question the most silent, realistic and accurate bike trainer available. Cassette does not ship installed on trainer. FEATURES - Type of trainer: Interactive Smart direct drive with motor brake - Magnets: 32 Neodymium magnets - Transmission: None - Electrical requirements: 110-240 Volt, Mains power optional - Power indicator: Multicolour LED, Spot on floor - Connection indicator: (ANT/BT) 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 - 11 speed. Campagnolo body sold separately - Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148 mm. Adapter for 135 x 10 mm available. - Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm & 148x12mm, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2200 Watt - Max. incline: 25% - Simulation of descent: Yes - Max. torque: 85 Nm - Max. brake force: 250 N - Flywheel: Virtual - Mass inertia: Variable to 125kg (275.6lbs) - Calibration: No calibration required - Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) - Height: 550 mm (21.7 in) - Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) - Weight: 21.5 kg (47.3 lbs) Article number T2850 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, Tablet, ANT+FE-C bike computers, Stand alone, Connect to computer via ANT+antenna - Output: Speed, Cadence, Power - Read out on: Smartphone, Tablet, Bike computer, Sports watch, Computer with ANT+ antenna Accuracy <1%

The Neo 2T has improved performance, better sprints and high-end pedaling analysis making a leading bike trainer even better. Quiet, vibration free operation, better climbing, realistic feel and pedaling analysis, the Neo 2T provides an optimal indoor workout. You will train with accurate metrics, tackling climbs and challenging other riders all from the comfort of your own home. The Neo 2T has an improved beefed up motor and magnets to better handle sudden changes in speed whether you are sprinting or tackling rough climbs with a realistic feel of outdoor cycling. The Road Feel feature replicates a variety of road surfaces, so you can ride on cobblestone, smooth asphalt or gravel all while never leaving your home. Neo 2T simulates grades of up to 25% and the Descent Feature kicks in a motor assist to replicate the exhilaration of blazing downhill. You can fine tune your pedal stroke utilizing ANT+ or bluetooth connectivity with a variety of third-party applications by relaying info through every stroke of the pedal. You can use this data to optimize the power your legs provide to the pedals, giving you the edge on long rides and climbs. The Neo 2T supports Bluetooth and ANT+, allowing connection to an array of compatible smartphones, tablets, laptops, bike computers and sports watches. You can choose from a variety of Tacx workouts and videos when you are ready to hit the virtual road. The Neo 2T trainer outputs accurate power, cadence and speed data, plus provides pedaling analysis so you can improve your technique. Neo 2T is compatible with Zwift, TrainerRoad, and all other popular training apps. FEATURES: · Type of trainer: Interactive Smart direct drive with motor brake · Magnets: 32 Neodymium magnets · Transmission: None · Electrical requirements: 110-240 Volt , Mains power optional · Power indicator : Multicolor LED , Spot on floor · Connection indicator (ANT/BT): 2 LEDs · Firmware upgradeable: Yes · Suitable cassettes: Shimano & SRAM: 8-12 speed. Campagnolo, SRAM XD and XD-R body sold separately. Not suitable for Specialized SCS system · Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148mm. Adapter for 135 x 10 mm available. · Supplied with: Front wheel support , Quick release for road bikes and mountain bikes (5mm) , Direct drive quick release with adapter set 142x12mm & 148x12mm , 1 month Tacx Premium software SPECIFICATIONS: · Max. power (40 km/h): 2200 Watt · Max. incline: 25% · Simulation of descent: Yes · Max. torque: 85 Nm · Max. brake force: 250 N · Flywheel: Virtual · Mass inertia: Variable to 125kg (275.6lbs) · Calibration: No calibration required · Footprint (lxw): 575 × 750 mm (22.6 × 29.5 in) · Height: 550 mm (21.7 in) · Dimensions when folded: 620 × 260 × 440 mm (24.4 × 10.2 × 17.3 in) · Weight: 21.5 kg (47.3 lbs) · Article number: T2875 DATA OUTPUT AND CONTROL: · Wireless communication: ANT+ FE-C, Bluetooth Smart open · Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Stand alone , Tablet · Output: Cadence, Power, Speed · Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet · Accuracy: <1%

Bigger and Stronger for a Better Ride Featuring an improved ride feel and more accurate power measurements, this smart bike trainer has everything you need for an enjoyable and efficient indoor training session. - Ride hard. This trainer can handle sprints up to 2,000 watts. - Work up a sweat with inclines up to 16% that hold up to your most serious sprints. - Accuracy matters. Measure your power to within 2.5%. - Keep crushing it with your favorite apps, including Zwift and Tacx. - Finally, a trainer that won’t wake the whole house when you ride hard. ACCURATE AND RELIABLE This trainer is redesigned to let you track your performance and progress with reliable, consistent measurements. That includes power, speed and cadence, measured accurately within 2.5%. READY TO SPRINT The well-balanced design and large footprint of the FLUX 2 Smart trainer ensures maximum stability, even during the most explosive sprints, up to 2,000 watts. CLIMB HIGHER Get the most out of your intense workouts by training on realistically simulated inclines up to a 16% gradient. A MORE REALISTIC RIDE At 16.8 lbs (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness. SMOOTH AND SILENT This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available. IMPROVED COMPATIBILITY The trainer comes with additional axle adapters to significantly improve the axle compatibility. It is compatible with 142x12 mm and 148x12 mm axles — right out of the box. HIGHLY COMPATIBLE The FLUX 2 Smart trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift. ABLE TO STAND ALONE You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance. DEVICE COMPATIBILITY Connect FLUX 2 Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time. TACX TRAINING SOFTWARE Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan. TACX TRAINING PLANS Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more.

Includes Shimano or SRAM 11-Speed 11-28T Cassette The FLUX is a compact and realistic interactive direct drive and is maintenance-free. The swift response of the Smart electronics and the 7kg flywheel transmit the slightest fluctuations in resistance directly and accurately to your legs. Tacx Smart trainers use the Bluetooth Smart and ANT+ FE-C protocol for communication which allows them to be controlled by third-party software. The software receives the speed, cadence and power from the trainer and controls the brake. Click on more information for an explanation of the compatibility and functions of each software package. - Direct drive trainer with an electro brake - Stable frame design - Bluetooth and ANT+ FE-C communication capable - Maximum resistance of 1500 watt - Incline simulation up to 10% - 15 lbs flywheel - Measure speed, cadence and power FEATURES: - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator (Wattage): None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Supplied with: Quick release for racing bikes and mountain bikes (5 mm) - Suitable bikes: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available , Not suitable for a long cage rear derailleur - Suitable cassettes: various Shimano, SRAM & Campagnolo cassettes SPECIFICATIONS: - Max. power (40 km/h) : 1500 Watt - Max. slope: 10% - Simulation of descent :No - Max. torque: 22.1Nm - Max. brake force: 65 N - Flywheel: Actual, 7 kg - Flywheel effect: 22.8kg - Calibration: Spin down - Footprint (lxw): 670x650mm (26.4x25.6 in) - Height: 465 mm (18.3 in) - Dimensions when folded: Not foldable - Weight: 16 kg (35.3 lbs) - Article number: T2900 DATA OUTPUT AND CONTROL: - Wireless communication: ANT+ FE-C , Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone - Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <5% A bike with a long cage derailleur won't fit the FLUX as the maximum distance between the centre of the cassette and top of the FLUX's leg is 200 mm (as shown in the image below). When using a long cage derailleur in the highest gear, it'll hit the leg. See the third image for visual explaination.

Includes Shimano or 10-Speed Cassette The FLUX is a compact and realistic interactive direct drive and is maintenance-free. The swift response of the Smart electronics and the 7kg flywheel transmit the slightest fluctuations in resistance directly and accurately to your legs. Tacx Smart trainers use the Bluetooth Smart and ANT+ FE-C protocol for communication which allows them to be controlled by third-party software. The software receives the speed, cadence and power from the trainer and controls the brake. Click on more information for an explanation of the compatibility and functions of each software package. - Direct drive trainer with an electro brake - Stable frame design - Bluetooth and ANT+ FE-C communication capable - Maximum resistance of 1500 watt - Incline simulation up to 10% - 15 lbs flywheel - Measure speed, cadence and power FEATURES: - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator (Wattage): None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Supplied with: Quick release for racing bikes and mountain bikes (5 mm) - Suitable bikes: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths available , Not suitable for a long cage rear derailleur - Suitable cassettes: various Shimano, SRAM & Campagnolo cassettes SPECIFICATIONS: - Max. power (40 km/h) : 1500 Watt - Max. slope: 10% - Simulation of descent :No - Max. torque: 22.1Nm - Max. brake force: 65 N - Flywheel: Actual, 7 kg - Flywheel effect: 22.8kg - Calibration: Spin down - Footprint (lxw): 670x650mm (26.4x25.6 in) - Height: 465 mm (18.3 in) - Dimensions when folded: Not foldable - Weight: 16 kg (35.3 lbs) - Article number: T2900 DATA OUTPUT AND CONTROL: - Wireless communication: ANT+ FE-C , Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone - Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <5% A bike with a long cage derailleur won't fit the FLUX as the maximum distance between the centre of the cassette and top of the FLUX's leg is 200 mm (as shown in the image below). When using a long cage derailleur in the highest gear, it'll hit the leg. See the third image for visual explaination.

Looking for a smart, direct-drive trainer? The FLUX S Smart checks all the boxes: it’s reliable, accurate, silent, strong, and features a heavy flywheel for a very realistic ride feel. Made to help you sweat while cycling with your favorite apps, this bike trainer is the ideal indoor training companion. - Measure your power within 3% error tolerance - Next-to-silent direct drive trainer lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 10% gradient and a max sprint resistance of 1,500 watts - Sturdy design easily allows for riding full-out and standing on the pedals FEATURES Type of trainer: Interactive Smart direct drive with electric brake Magnets: 8 Permanent ferrite magnets & 8 electromagnets Transmission: None Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): 2 LEDs Firmware upgradable: Yes Suitable cassettes: Shimano & SRAM: 8 - 11 speed, Campagnolo. Not suitable for Specialized SCS system, SRAM XD and XD-R body sold separately Suitable axles: Road 130mm, MTB 135mm, 142mm & 148mm thru-axles. Adapter for 135 x 10mm available. Suitable bikes: Race, Tri, & MTB Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct-drive quick release with adapter set for 142x12mm & 148x12mm thru-axles, 1 month Tacx Premium software SPECIFICATIONS Max. power (40 km/h): 1500 Watt Max. incline: 10% Simulation of descent: No Max. torque: 22.1 Nm Max. brake force: 65 N Flywheel: 7kg Mass inertia: 22.8kg (50.3 lbs) Calibration: Spin down Footprint (lxw): 670 x 642 mm (26.4 x 25.3 in) Height: 460mm (18.1 in) Weight: 22.8kg (50.3lbs) Article number: T2900S DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence, Power, Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <3%

For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad. - Wheel-on design sets up with two easy clicks and securely locks in place - Measures speed, power, and cadence - Virtually silent flywheel lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 7% gradient FEATURES Type of trainer: Interactive Smart trainer with electric brake Magnets: 6 Magnets Transmission: Roller, 30mm Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 800 Watt Max. incline: 6% Simulation of descent: No Max. torque: 15.3 Nm Max. brake force: 45 N Flywheel: 1.6 kg Mass inertia: 11.8kg (26.0 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 9.41 kg (20.7 lbs) Article number: T2240 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence , Power , Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <5%

The Hard Charger Built for the hard charger, the Super DH is most at home on steep terrain-featuring Spherical Technology and full DH certification. Spherical Technology's Ball-and-Socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. The Super DH is loaded with additional features-including a 360-degree wraparound, tool-free removable chin bar beefy enough to satisfy the rigors of ASTM 1952 testing, a huge eyeglass- and goggle-friendly eye port, an adjustable-height visor, snap-in camera mount, Overbrow Ventilation and X-Static padding, and a quality fit that is second to none. The end result is uncompromising protection and performance, and unparalleled versatility. The Super DH is ready to take World Cup DH runs on the chin, bang out bike park laps until the chairlifts stop running, or settle into hours of back-country uphill grinding in search of that perfect ribbon of high-consequence singletrack. - SPHERICAL TECHNOLOGY—Spherical Technology's Ball-and-Socket design, powered by MIPS, helps redirect impact forces away from the brain by allowing the outer liner to rotate around the inner liner during a crash. - MIPS—MIPS (Multi-directional Impact Protection System) is a leading slip-plane technology inside the helmet designed to help reduce rotational forces that can result from certain impacts. - REMOVABLE CHIN BAR—Removable protective chin bar designed for trail riding adaptability. Attaches with a simple 3-step connection process—no tools required. [Warning: All chin bars have limits, and serious injury or death can occur. Read owner's manual carefully before using your helmet.] - INTEGRATED BREAKAWAY CAMERA MOUNT—Seamless camera mount, requiring no zip ties or tape, is engineered to break away from the helmet upon impact to help reduce the risk of injury. - FLOAT FIT DH—A minimalist yet robust and lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments. - ADJUSTABLE VISOR—Adjustable visor allows for sun protection and easy goggle storage. - OVERBROW VENTILATION—Overbrow Ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation. - SWEAT GUIDE—Sweat Guide pad design pulls moisture away from the brow pad and eyewear. - FIDLOCK BUCKLE—Fidlock is an easy-to-use magnetic buckle. This time saving feature slides closed laterally for an effortless, secure fit.

Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride. SIMPLE SETUP With just two simple clicks, you'll be ready to ride. SMALL BUT STABLE This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride. EASY TO STORE Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position. MAGNETIC BRAKE You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. RESISTANCE CONTROL A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts. REALISTIC RIDE FEEL An actual flywheel generates a realistic and smooth pedal stroke. SMOOTH AND QUIET The closed resistance unit reduces noise and makes for a smoother ride. HOW FAR AND HOW FAST Add a speed sensor (sold separately) to track how far and how fast you're riding and train with some of your favorite apps. FEATURES - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Road, Tri, & MTB with skewer quick release - Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 1050 Watt - Simulation of descent: No - Max. torque: 17 Nm - Max. brake force: 50 N - Flywheel: Actual of 1.6 kg - Mass inertia: 9.18 kg (20.2 lbs) - Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in) - Height 410 mm (16.1 in) - Dimensions when folded 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in) - Weight 8.53 kg (18.8 lbs)

The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart

- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers - NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers - NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)

Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.

Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer.

The Taco Bashguard is designed to protect your chainring from obstacles like logs or rocks. It is hidden behind the crank and mounted to ISCG05 tabs that are located around your bottom bracket. It offers great protection for both oval and round chainrings, especially direct mount rings that cannot mount to a standard 4-bolt bashring. The Taco Bashguard fits up to a 32T oval chainring or 34T round one. - The Taco Bashguard can be used with any chainring from 26T-32T oval or 26T-34T round - Box includes taco bashguard (assembled), 6 x 1mm spacers, 3 x 3mm spacers, 3x 16mm stainless bolts, and 1 x 12mm stainless bolt - Weight: 56g

- Adapter for Tacx Direct Drive trainer - 01 is compatible with 142 x 12mm and 148 x 12mm - 02 is compatible with 135 x 10mm - 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive trainer), 142 x 12mm and 148 x 12mm - 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the thru axle mount on a Tacx NEO or FLUX Smart trainer.

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.

- Includes Sweatcover for Smartphone (T2931) and Towel (T2940) - 891076

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

- Durable formfitting 4 way Stretch grid fabric across the back of the hand and Velcro wrist closure for those who prefer a more secure feel - AX RITTERGäo palm has a polyurethane injected pattern for a tackier feel. The palm material wraps around the fi

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.