Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Your Search: "bern helmets"

$49.99 $69.99 29% Off
- Premium style without the premium price - In-Mold construction - Crank fit dial adjustment - 18 vents Small: 52-55.5cm Medium: 55.5-59cm Large: 59-62cm
$94.99 $124.99 24% Off
- Bern's entry into the road helmet market with a lightweight, aerodynamic design with max ventilation - MIPS equipped for maximum protection - Lightweight and breathable 360-degree adjustable Bern Yoke fit system developed with Boa - Reinforced in-mold EPS construction with 18 total vents - Interior air flow channels for added ventilation - Built-in sunglass storage on the shell exterior - Antimicrobial comfort padding - Small: 52-55.5cm, Medium: 55.5-59cm, Large: 59-62cm - 287g
$30.00
The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)
$109.99 $139.99 21% Off
- Bern's safest helmet - Integrated light included (removable) - Construction—Inmold - Compass Dial Fit system - Reinforced U-Locks - Removable visor - Adjustable strap divider - Compression molded pads - Average weight: 350g - MIPS : multi-directional Impact Protection System - 13 vents Specs: - Integrated Light: Yes - Visor: Yes - Impact Protection System: MIPS - Certification: CPSC, EN1078, NTA 8776 E-bike - e-Bike approved: Yes Sizing: - Small = 52 – 55.5cm - Medium = 55.5 – 59cm - Large = 59 – 62cm
$219.00
The MET Roam MIPS is designed for all-mountain and enduro riding. The back of the head and the temples are especially in need of protection from impact, so we’ve increased the coverage around these key areas, without sacrificing the helmet’s light weight. The injection-molded visor is flexible to adapt to the shell of the helmet in a crash. This unique feature helps to manage extra rotational forces transferred to your neck. There are clips on the visor and a rear edge, which keep goggle straps in place during the ride, achieving ultimate compatibility with your eyewear. Featuring the MIPS-C2 rotational management system, the Roam is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The MIPS-C2 solution separates the shell and the liner with a thin plastic Low Friction Layer (LFL). The Roam Mips features 22 vents that work together with the purpose-built internal channel to provide optimal airflow at high and low speed. The MET Roam has also been rewarded for its comfortable fit. The inner padding has an extended surface area which provides the perfect stability without disturbing internal airflow. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - Exceptionally comfortable and secure on the head thanks to a refined internal shape and stabilizing inner padding - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Orbital Fit System - The 360° head belt with vertical and occipital adjustments help to maximize adjustability - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Integrated goggle strap clips and sunglass ports to securely dock eyewear when climbing or resting - 22 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 62cm
$300.00
The elements are in perfect equilibrium: performance, aerodynamics and safety. The design leaves you in no doubt: Protone Icon is KASK's new classic, an exceptional helmet for road, gravel, cyclocross and MTB cross-country. Every aspect has been redesigned to push performance to the limits. REDEFINED GREATNESS A redesigned internal frame gives the wearer greater safety. Seamless technology joins the lower and upper parts of the shell to give it a refined, elegant look and improved aerodynamics. The new OCTOFIT+ adjustment system optimizes the helmet's comfort and stability, while a vertical stabilizer across the nape of the neck provides ergonomic neck support and delivers enhanced balance and a customized fit. Its large rotation cap coated in a special rubber increases finger grip, and a reflective insert in the rear helps keep the helmet's wearer even safer. The internal lining is made of CoolMax® fabric which, as well as being comfortable and quick-drying, is also removable and washable. As is standard with all KASK helmets, the Protone Icon has been developed in accordance with the KASK ROTATIONAL IMPACT WG11 TEST protocol, an objective, scientific approach to measuring the helmet's performance against rotational impacts.
$74.95
DETAILS Premium Style for Recreational MTB How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. FEATURES - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® SPORT FIT SYSTEM — The Roc Loc® Sport fit system offers easy one-handed operation with a 7cm adjustment range. Its confident clicking feel and sound lets riders know that the helmet is adjusting to a comfortable fit. With comfort similar Roc Loc 5 and ponytail compatibility, the new Roc Loc Sport fit system brings premium function to sport level helmets. - REFLECTIVE DETAILS — Reflective Details enhance visibility at nighttime or in low-light conditions when illuminated by a light source, such as headlights, by returning the light back to the source and reaching the driver's eye. - UNIVERSAL FIT™ SIZING — Our Universal Fit helmets are sculpted to look good and fit great for almost anyone on the first try. By developing proprietary shell sizes based on specific customer groups, and combining them with an easily-adjustable fit system, it's easy for you get the right fit, straight out of the box, without the hassle or expense of trying multiple sizes. HIGHLIGHTS - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older
$54.94 - $74.95 $74.95 Up to 27% Off
Premium Style for Recreational MTB How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. FEATURES - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® SPORT FIT SYSTEM — The Roc Loc® Sport fit system offers easy one-handed operation with a 7cm adjustment range. Its confident clicking feel and sound lets riders know that the helmet is adjusting to a comfortable fit. With comfort similar Roc Loc 5 and ponytail compatibility, the new Roc Loc Sport fit system brings premium function to sport level helmets. - REFLECTIVE DETAILS — Reflective Details enhance visibility at nighttime or in low-light conditions when illuminated by a light source, such as headlights, by returning the light back to the source and reaching the driver's eye. - UNIVERSAL FIT™ SIZING — Our Universal Fit helmets are sculpted to look good and fit great for almost anyone on the first try. By developing proprietary shell sizes based on specific customer groups, and combining them with an easily-adjustable fit system, it's easy for you get the right fit, straight out of the box, without the hassle or expense of trying multiple sizes. HIGHLIGHTS - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older
$74.95
Premium Style for Recreational MTB How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® SPORT FIT SYSTEM — The Roc Loc® Sport fit system offers easy one-handed operation with a 7cm adjustment range. Its confident clicking feel and sound lets riders know that the helmet is adjusting to a comfortable fit. With comfort similar Roc Loc 5 and ponytail compatibility, the new Roc Loc Sport fit system brings premium function to sport level helmets. - REFLECTIVE DETAILS — Reflective Details enhance visibility at nighttime or in low-light conditions when illuminated by a light source, such as headlights, by returning the light back to the source and reaching the driver's eye. - UNIVERSAL FIT™ SIZING — Our Universal Fit helmets are sculpted to look good and fit great for almost anyone on the first try. By developing proprietary shell sizes based on specific customer groups, and combining them with an easily-adjustable fit system, it's easy for you get the right fit, straight out of the box, without the hassle or expense of trying multiple sizes. - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older
$239.94 $289.95 17% Off
Lightweight full-face helmets for all-mountain riders and enduro racers. The Youth Proframe Helmet delivers exceptional airflow and breathability on both climbs and descents. Those looking to capture every sweet run will appreciate the removable, under-visor GoPro mount. Ride wide open with the Proframe Helmet. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Increased ventilation and decreased surface contact area improve cooling - Includes additional pad set to optimize fit Meets the ASTM-F1952 Downhill MTB certification standard Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel 22% ABS, 21% EPS, 15% polycarbonate, 13% polyurethane, 9% Pa
$229.94 $279.95 18% Off
Lightweight full-face helmets for all-mountain riders and enduro racers. The Youth Proframe Helmet delivers exceptional airflow and breathability on both climbs and descents. Those looking to capture every sweet run will appreciate the removable, under-visor GoPro mount. Ride wide open with the Proframe Helmet. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Increased ventilation and decreased surface contact area improve cooling - Includes additional pad set to optimize fit Meets the ASTM-F1952 Downhill MTB certification standard Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel 22% ABS, 21% EPS, 15% polycarbonate, 13% polyurethane, 9% Pa
Lightweight full-face helmets for all-mountain riders and enduro racers. The Youth Proframe Helmet delivers exceptional airflow and breathability on both climbs and descents. Those looking to capture every sweet run will appreciate the removable, under-visor GoPro mount. Ride wide open with the Proframe Helmet. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Increased ventilation and decreased surface contact area improve cooling - Includes additional pad set to optimize fit
$79.00
The MET Eldar MIPS has been re-designed for young riders who are fearless and skilled. A high quality helmet for those who aspire to ride the Enduro World Series one day. With extended coverage of the head it offers ultimate protection for those who dare to do more. Featuring the MIPS-C2 brain protection system, the Eldar is able to slide against the head in the case of a crash, redirecting damaging rotational motion. - In-mold polycarbonate shell with EPS liner - Extended head coverage for more thorough protection - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to its refined internal shape - 14 vents are internally engineered for air channeling to improve ventilation and comfort - MET Safe-T Twist 2 Fit System - 360° head belt reduces pressure points on the head - Straps with adjustable dividers offer a customized fit - Reflective rear decal to enhance visibility - Comfort pads are hand-washable - Weight: 305g Sizing: - One Size = 52 – 57cm
$74.95
How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. FEATURES - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® SPORT FIT SYSTEM — The Roc Loc® Sport fit system offers easy one-handed operation with a 7cm adjustment range. Its confident clicking feel and sound lets riders know that the helmet is adjusting to a comfortable fit. With comfort similar Roc Loc 5 and ponytail compatibility, the new Roc Loc Sport fit system brings premium function to sport level helmets. - REFLECTIVE DETAILS — Reflective Details enhance visibility at nighttime or in low-light conditions when illuminated by a light source, such as headlights, by returning the light back to the source and reaching the driver's eye. - UNIVERSAL FIT™ SIZING — Our Universal Fit helmets are sculpted to look good and fit great for almost anyone on the first try. By developing proprietary shell sizes based on specific customer groups, and combining them with an easily-adjustable fit system, it's easy for you get the right fit, straight out of the box, without the hassle or expense of trying multiple sizes. HIGHLIGHTS - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older
$239.94 $299.95 20% Off
Breathable full-face mountain bike helmet. Conquer the mountain with this full-face protection specialist. The Proframe Helmet is the original full-face trail helmet and is still the market leader. Designed to meet the needs of all-mountain riders and enduro racers, it packs Mips® technology into a superlight shell. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Increased ventilation and decreased surface contact area improve cooling - Includes additional pad set to optimize fit Meets the ASTM-F1952 Downhill MTB certification standard Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 22% ABS, 21% EPS, 15% polycarbonate, 13% polyurethane, 9% Pa
$239.94 $299.95 20% Off
Breathable full-face mountain bike helmet. Conquer the mountain with this full-face protection specialist. The Proframe Helmet is the original full-face trail helmet and is still the market leader. Designed to meet the needs of all-mountain riders and enduro racers, it packs Mips® technology into a superlight shell. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Increased ventilation and decreased surface contact area improve cooling - Includes additional pad set to optimize fit Meets the ASTM-F1952 Downhill MTB certification standard Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 22% ABS, 21% EPS, 15% polycarbonate, 13% polyurethane, 9% Pa
The most iconic Lazer helmet has been refined and it’s ready for the front of the race. The Z1, now with KinetiCore technology. More lightweight. More ventilation. More iconic. An LED light to fit the Rollsys® thumbwheel for increased visibility and safety. KinetiCore Controlled Crumple Zones absorb the force of both direct and rotational impacts in the event of a crash to re-direct energy away from your head, protecting you when you need it most. The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aero Shell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents.
$224.96 $299.95 25% Off
Aerodynamic performance, safety and ventilation do not need to come at the expense of each other. By using our whole-helmet approach to development, we have been able to deliver unparalleled levels of aerodynamic performance, safety and ventilation without compromise in the Ventral Mips. Taking inspiration from the Venturi effect, the helmet's airflow zones allow the helmet to pass through the air with greater efficiency, making it faster. Residual air traveling around the helmet is managed by the 22° aero trailing edge, the perfect angle for minimizing turbulence, further improving aerodynamic performance. By leading air through rather than around the helmet, its wake is minimized, while its ventilation and cooling properties are enhanced. Other features of our whole-helmet approach include a fully wrapped unibody shell with an EPS liner for the ideal balance between weight and protection. Now including Mips for enhanced rotational impact protection, the helmet also features a lightweight adjustment system spanning the whole head for a comfortable and secure fit.
$279.95
Maximum coverage open-face mountain bike helmet. The Dropframe Pro Helmet is a game-changing, open-faced 3/4 enduro helmet. It features Mips®, the BOA® fit system for class-leading fit and security, increased ventilation, plus an ionic+® anti-microbial liner and cheek pads to optimize fit. With its increased coverage for the ears, jaw, and back of the head, this MTB helmet provides the most complete coverage we offer in an open-face helmet. Key Features and Specifications: - BOA® fit system for class-leading fit and security - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Big Bore front vents include eyewear storage recess - Increased ventilation and decreased surface contact area improve cooling - Ionic+® anti-microbial liner and cheek pads to optimize fit - Fidlock magnetic closure Meets the NTA-8776 E-bike helmet certification standard Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 30% EPS, 11% EVA, 10% polycarbonate, 13% nylon, 11% Pom, 14% Tpee
$279.95
Maximum coverage open-face mountain bike helmet. The Dropframe Pro Helmet is a game-changing, open-faced 3/4 enduro helmet. It features Mips®, the BOA® fit system for class-leading fit and security, increased ventilation, plus an ionic+® anti-microbial liner and cheek pads to optimize fit. With its increased coverage for the ears, jaw, and back of the head, this MTB helmet provides the most complete coverage we offer in an open-face helmet. Key Features and Specifications: - BOA® fit system for class-leading fit and security - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Big Bore front vents include eyewear storage recess - Increased ventilation and decreased surface contact area improve cooling - Ionic+® anti-microbial liner and cheek pads to optimize fit - Fidlock magnetic closure Meets the NTA-8776 E-bike helmet certification standard Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 30% EPS, 11% EVA, 10% polycarbonate, 13% nylon, 11% Pom, 14% Tpee
$179.94 - $224.95 $224.95 Up to 20% Off
Full coverage open-face mountain bike helmet. Bump up your protection level for enduro and trail riding with the top-rated Dropframe Helmet, delivering added coverage for your head, ears, and jaw. This 3/4 enduro helmet features Mips® protection, our dual-density Varizorb™ EPS liner, and more coverage than a traditional open-face helmet. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - The securely fixed visor is positioned to channel airflow into the Big Bore vents - Removable anti-microbial and moisture-wicking liner - Includes additional pads for a custom dialed fit Materials: 31% EPS, 16% TPE, 14% polycarbonate, 10% PA, 6% polyurethane foam/polyester *Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel
$159.99
The Sphere MIPS delivers a perfect combination of great looks, all day comfort, performance and features to help protect in the event of an impact. You will look forward to every ride in the Lazer Sphere MIPS helmet. The ARS Fit System enables progressive fit adjustment via a thumbwheel. It distributes pressure evenly around the head, eliminating hot spots and pressure points. The adjustable head basket is ponytail friendly. Eighteen vents orientated at a 15-degree angle assures maximum airflow when the helmet is in the riding position. MIPS protection helps reduce the risk of rotational injury. A polycarbonate layer built inside the helmet keeps the foam together in the event of a crash, offering better protection from successive impacts. Sphere MIPS has been awarded the 5-Star "Best Available" protection rating from Virginia Tech. A docking area makes eyewear storage easy and bottom-shell protection helps prevent damage to the helmet foam. The optional Aeroshell accessory protects against the helmets or offers an aerodynamic benefit when desired. The Sphere MIPS weighs just 280 grams. WEIGHT: 280g (size small) MATERIAL: EPS Foam, Polycarbonate, Nylon FIT SYSTEM: Advanced Rollsys System (ARS) VENTILATION: 18 ROTATIONAL PROTECTION: MIPS CERTIFICATION: CPSC ACCESSORIES: Optional Aeroshell Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm Features: Lazer Aeroshell compatible Multi use polycarbonate cover which fits over top of your helmet. It covers the front and side vents to protect your head from rain and cold or to gain an aerodynamic advantage. Adjustable Head Basket Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Advanced Rollsys System (ARS) Easily adjust your helmet's fit by using the thumbwheel on the top of the helmet. Lazer's unique fit system prevents hotspots or pressure points by making the adjustment around the entire circumference of the head. MIPS layer The Multi-Directional Impact Protection System (MIPS) helps reduce the risk of rotational brain injury by isolating your head from the rotation of the helmet shell in the event of an impact. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Well ventilated Carefully designed vents and internal channeling pull air into the helmet and across your head for increased airflow. Essential for performance and comfort during high temperatures and hard efforts.
$159.99
The Sphere MIPS delivers a perfect combination of great looks, all day comfort, performance and features to help protect in the event of an impact. You will look forward to every ride in the Lazer Sphere MIPS helmet. The ARS Fit System enables progressive fit adjustment via a thumbwheel. It distributes pressure evenly around the head, eliminating hot spots and pressure points. The adjustable head basket is ponytail friendly. Eighteen vents orientated at a 15-degree angle assures maximum airflow when the helmet is in the riding position. MIPS protection helps reduce the risk of rotational injury. A polycarbonate layer built inside the helmet keeps the foam together in the event of a crash, offering better protection from successive impacts. Sphere MIPS has been awarded the 5-Star "Best Available" protection rating from Virginia Tech. A docking area makes eyewear storage easy and bottom-shell protection helps prevent damage to the helmet foam. The optional Aeroshell accessory protects against the helmets or offers an aerodynamic benefit when desired. The Sphere MIPS weighs just 280 grams. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm
$74.95
Overview How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. Specs - Complies with the US CPSC Safety Standard for Bicycle helmets for Persons Age 5 and Older - In-Mold construction - Roc Loc® Sport Mips® - Integrated Mips® Brain Protection System - Quick-dry padding - 325g (size Universal Womens CPSC) - Reflectivity - Deep internal channeling - Removable visor
Overview How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. Specs - Complies with the US CPSC Safety Standard for Bicycle helmets for Persons Age 5 and Older - In-Mold construction - Roc Loc® Sport Mips® - Integrated Mips® Brain Protection System - Quick-dry padding - 325g (size Universal Womens CPSC) - Reflectivity - Deep internal channeling - Removable visor
$129.94 $180.00 28% Off
Approaching every obstacle with creativity and the inspiration to do things differently has always been the ethos POC has shared with Fabio Wibmer. Now, as he leads and reimagines what is possible on a bike, and as POC leads and innovates in the development of award-winning protection, the two have come together to develop the exclusive Fabio signature series. Everything in the series features details designed by Fabio himself. The well-ventilated Tectal is ideal for trail and enduro and includes aramid bridges in the helmet liner for extra strength and stability. The reinforced EPS liner provides a high level of protection and the unibody shell construction further enhances the safety properties and construction integrity of the helmet while maintaining a low weight. The Tectal offers more coverage than conventional mountain bike helmets and has a highly efficient ventilation design, optimized and evaluated through wind tunnel testing. The lightweight size adjustment system ensures a comfortable and secure fit. - Designed to provide more coverage at temples and back of head - Size adjustment system - Adjustable visor - Recco reflector
$89.94 $199.00 55% Off
One of the lightest (+/- 595g) all-mountain, trail and enduro full face helmets designed for all day comfort regardless of your riding discipline. The Trigger helmet provides all-round protection with patented inmould technology due to direct fusion of the helmet shell to the internal EPS material. Additionally, the Trigger FF is the only helmet on the market with the unique and patented technology of one complete and seamless EPS liner unit, with inclusion of the face guard structure. As a result, the rider benefits from increased structural strength, reduced weight & volume, and increased ventilation. The numerous ventilation openings have been strategically angled and positioned to offer superior air circulation and supply a continuous cooling system. Precision interlocking ErgoFit Ultra allows you to adjust the fitting ring both for verticle tilt and circumference-wise, guaranteeing a precise and comfortable fit for any head. With the 2-level visor adjustment capability, there is sufficient space to rest your google along the forehead yet below the visor. Lastly, the Fidlock magnetic buckle makes for a quick, efficient closure and release without compromising security. This helmet series fulfils the European safety standard, EN1078 as well as the American CPSC and AS for DH on frontal impact. - MIPS brain protection system - Patented all-in-one Inmould technology, external and internal ventilation channels - Adjustable, goggle compatible visor - Dial adjuster with precision interlocking - ErgoFit Ultra system for horizontal and vertical adjustment - Double-Inmould, 360° Inmould shell - Adjustable straps - Magnetic closure - +/- 595g (SM) - EN1078, CPSC, KC, AS - Sizes: XS = 49-54cm, SM = 54-58cm, ML = 58-62cm head circumference
$247.46 $329.95 25% Off
POC's Coron Air Mips Helmet has been designed to deliver performance protection all day long. Taking POC's whole-helmet approach to design and construction to deliver superior levels of comfort, fit and performance, the Coron Air Mips features optimized ventilation channels to ensure airflow is maximized at both low and high speeds, making it ideal for all-day use, especially during transfers between Enduro stages. Other features developed as part of our whole-helmet approach include MIPS rotational force protection; removeable cheek pads for extra protection on the way down and increased ventilation when riding between Enduro race stages. The helmet's specially formed ear chambers are designed to minimize the negative effect on balance and hearing associated with wearing a full-face helmet. A fiber glass shell and a multi-impact EPP liner provide high impact performance, durability and low weight. The Coron Air MIPS provides protection trusted by professionals. CORON AIR MIPS HELMET FEATURES: - Superior ventilation due to innovative air flow and vent design. - Lightweight, specifically designed to be worn all day. - Helmet integrated with MIPS. - Emergency removable cheek pads for added security in the case of a head or neck injury. - Ear chambers designed to support improved balance and hearing. - Chin bar constructed for optimized protection and easy breathing. - Break Away visor designed to break off in the case of an impact to protect the rider's neck. - Multi-impact EPP liner. - All internal padding can be removed for washing. - Simple and effective buckle fastening system for added security. - Precision and seemless fit with new Ora mountain bike goggle. - Certified downhill and enduro specific fullface helmet with fibreglass shell construction. - Weight: XS-S: 1120g, M-L: 1170g, XL-XXL: 1240g.
$99.94 $189.95 47% Off
The Speedframe Pro Blocked Helmet has earned Virginia Tech’s best rating (5 STARS) in its Bicycle Helmet Ratings program. Designed with input from our pro mountain bike athletes, this top-tier open-face mountain bike helmet offers a market-leading feature set. Top of that list is MIPS, which is designed to reduce rotational motion and redirect forces away from your brain should you crash. Dual-density Varizorb EPS bumps up that impact protection even further by spreading forces of impact across a wider area. The 360-degree fit system and Fidlock SNAP helmet buckle ensure a perfect fit every time you ride, and the buckle is a cinch to operate, even with gloves on. The XT2 liner is antimicrobial and manages odor while wicking moisture away from the head, and once it gets a little stinky, is easily removed and washed. Goggles pair well with the Speedframe Pro Blocked Helmet too, thanks to the 3-position adjustable visor. If you’re looking for a performance-minded trail helmet, congratulations—you just found your new lid. - MIPS added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable, washable XT2 liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3-position adjustable visor - 360° Fit System allows you to dial in your perfect fit every ride - Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel
$239.95
The Joy Ride Super 3R gives you everything you need to own the trail. It's designed for the ever-changing needs of trail riding with a unique removable chin bar technology that basically gives you two helmets in one. You can remove and carry the chin bar in your pack during long climbs, and then lock it in place for that added boost of confidence on technical terrain. The easy, tool-free installation and removal process takes seconds. The Float Fit system is lighter and more comfortable with a rubbber overmolded dial, plus this year No-Twist Tri-Glides have been adopted for added ease of adjustment. Other trail-specific features include our GoggleGuide adjustable visor, a breakaway camera mount and Overbrow Ventilation. The Super 3R includes MIPS (Multi-Directional Impact Protection System), which can provide an additional measure of protection in certain impacts. Specs: - MIPS (Multi-directional Impact Protection System) - a leading slip-plane technology designed to reduce rotational forces that can result from certain impacts. - Safety: wraparound chin bar: a removable protective chin bar, designed for trail riding adapability -- no tools required. Warning: all chin bars have limits, and serious injury or death can occur. Read owner's manual carefully before using your helmet. - Construction: Fusion in-mold polycarbonate shell - a process pioneered by Bell bonds the helmet's outer shell to the EPS foam liner to create a sturdier helmet. - Goggle-guide adjustable visor: accommodates both goggles and glasses - Number of vents: 23 helmet vents, 4 brow ports, 6 chin bar vents - Interior/liner type: X-static padding - quick-drying materials, woven with real silver fibers, inhibit growth of odor-causing bacteria and fungi - Ventilation Type: Overbrow ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation Fit system: Float Fit - A minimalist, lightweight fit system with an easy-to-turn rubber overmolded dial for adjustments - Weight 784 grams (size M) - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 62cm
Page 1 of 5 Next page