Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Your Search: "SRAM GX AXS"

Yeti Cycles SB 115 T2 - Sram AXS - Carbon Wheelset
T2, TURQ series carbon, SRAM X01 Eagle, Fox Factory 34 Fork TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle. - Upgraded Wheelset: DT Swiss EXC 1501 Carbon
SRAM Rear Derailleur B-Gap Tool
$6.00
The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.
SRAM GX Eagle B Bolt and Limit Screw Kit
$11.00
- GX Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5
Park Tool CC-4 Chain Checker
$15.95
The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.
SRAM GX 1X11 B Bolt and Limit Screw Kit
$16.00
- Rear Derailleur GX 1X11 B Bolt and Limit Screw Kit
SRAM PC-1110
$16.00
Designed from a long line of dependable, lightweight chains that are built for toughness, the recommended chain for APEX 1, PC-1110. Designed with SRAM’s trusted XX1 geometry, the PC-1110 features solid pin construction, 11-speed PowerLock and smooth, efficient shifting that you can count on every time out. - Optimized to work with X-SYNC rings for precise and dependable 11-speed performance - Fully compatible with all SRAM 1x drivetrains - Closing Link: PowerLock - Outer Plate: Polished grey - Inner Plate: Polished grey - Pin Treatment: Chrome Hardened - Weight: 232 - 273 grams - Rivet Type: Solid Pin - Speeds: 11
SRAM PC-870 8-Speed Chain
$18.00 $19.00 5% Off
SRAM's PC-870 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth and reliable, the PC-870 will take you where you want to go.
SRAM GX DH/X01 DH 7Sp B Bolt and Limit Screw Kit
$19.00
- GX DH/X01DH 7 Speed Rear Derailleur B-Bolt and Limit Screw Kit Hex5
SRAM Pad Insert (SRAM/Shimano)
$19.00
SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.
Bike Yoke Bike Yoke I-Spec II Remote Adaptor
$20.00
Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec II brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers with Shimano brakes. Our BikeYoke I-Spec II adapters are available as "left" or "right" for Shimano brake levers but you can also flip sides if you prefer a more inward or outward remote position: Compatible brakes: - Deore BL-M6000 - Deore BL-501 - SLX BL-M7000 - XT BL-M8000/8020 - XTR BL-M 9000/9020 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS
SRAM AXS Battery Cover
$20.00
The AXS battery cover is a light-weight cowling designed to protect the battery while installed on the derailleur. The AXS Battery Cover fits all AXS mountain bike derailleurs.
SRAM Twist Shifter Service Parts (2002+)
$20.00
- Replacement shifter/grip kits include bar sleeve, spring and index pawl
SRAM X-Sync Steel 11-Speed Chainring
$20.00 - $21.00 $21.00 Up to 5% Off
The SRAM X-Sync STEEL 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-SYNC technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Drivetrain Speeds: 10 , 11 - Material: Steel - Ring Position/Type: Single - Weight: 110 grams (32t), 96 grams (30t),
SRAM X-Sync Steel Direct Mount Chainring
$21.00
The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring
Bike Yoke Bike Yoke I-Spec EV Remote Adaptor
$22.00
Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapters are available as "left" or "right" side for Shimano brake levers and you can also flip sides if you prefer a certain more inward or outward remote position: Compatible brakes: - Deore BL-M6100/6120 - SLX BL-M7100/7120 - XT BL-M8100/8120 - XTR BL-M9100/9120 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS
SRAM QuickView Computer Mount (Road)
$22.00 $23.00 4% Off
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.
SRAM X-SYNC 2 Eagle Bosch Direct Mount Chainring
$22.00
The X-SYNC 2 Bosch Direct Mount Chainring is built with the needs of E-MTB riders in mind, and incorporates the same X-SYNC 2 Eagle chain management technology found in every SRAM 1x drivetrain. - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses - An integral component of the SRAM 1x drivetrain - Speeds: 12 - Material: Steel
SwissStop Disc E Brake Pads—SRAM eTap AXS, Level
$23.36
The SwissStop E Compound is a long-lasting organic disc brake pad with high temperature stability for consistent brake power. - High endurance pad compound is long lasting - Provides easy modulation of braking force - Organic formula is low noise and rotor-friendly - Compatible with SRAM Red eTap AXS (Gen. 2 'Two-Piece' caliper), Force eTap AXS, Rival eTap AXS, and Level Ultimate,TLM B1 (2020+); Avid Elixir - Designed for ebike: Yes - Backing Plate Material: Steel - Compound: Organic
SRAM AXS Rocker Standalone Paddle
$25.00
The newly redesigned Eagle AXS Rocker Paddle gives the rider a traditional, familiar interface for their cutting-edge electronic control. Effortless electronic shifting paired with a more traditional-feeling actuation makes for quick assimilation of riders who are new to AXS and provides another ergonomic option for those who have run AXS previously. The controller's functions are customizable through the AXS app, allowing you to assign any action to any button. With AXS, you can truly make your cockpit your own. - Customize in-board and outboard shift options - AXS-enabled components can be programmed and personalized using the SRAM AXS App.
SRAM Trail/Guide Disc Brake Pads
$25.00 - $27.00 $27.00 - $33.00 Up to 21% Off
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.
SRAM Brake Lever Bearing Press
$28.00
Service all SRAM brake lever pivot bearings with this easy-to-use bearing press. Keep all of the SRAM brake pivots feeling snappy and ready to ride. Features - Easily replace or install pivot bearings in SRAM brake levers - For use with CODE RSC, X0 Trail, Level Ultimate, Guide Ultimate/RSC, G2 Ultimate
SRAM NX 11-speed X-Actuation Trigger Shifter
$29.00 $32.00 9% Off
SRAM's NX trigger shifter with X-ACTUATION technology gives you sharp, dependable shifting. Built for precise and swift shifting across SRAM's wide range 11-speed cassette, the NX trigger shifter brings industry changing technology to everyone. - X-ACTUATION for precise and dependable 11-speed performance - Fully compatible with all SRAM 1x drivetrains - Weight: 142 grams - Speeds: 1 x 11 - Colors: Black
Wolf Tooth ShiftMount SRAM Matchmaker Shifter to I-Spec-II Brake
$29.95
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - MM-ISII is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC II brake - MM-ISII is compatible with M9020, M9000, M8000, M7000, and M6000 brake levers - MM-ISII is compatible with, but not designed for SRAM AXS because the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders
SRAM Rival AXS Chain - 12-Speed, 120 Links
$32.00
The Flattop technology of the SRAM Rival chain creates a lighter, quieter, stronger chain that’s compatible with 12-speed 1x and 2x eTap AXS drivetrains. Ride far, long and fast—this chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Use for both 1x and 2x eTap AXS - Includes Flattop PowerLock Specifications: Links (links): 120 Chain Connection Type: Single Use Master Link Color: Silver Half Link Chain: No Drivetrain Speeds: 12
SRAM Rival Flattop Chain w/PowerLock
$32.00
The Flattop technology of the SRAM Rival chain creates a lighter, quieter, stronger chain that's compatible with 12-speed 1x and 2x eTap AXS drivetrains. Ride far, long, and fast. This chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Use for both 1x and 2x eTap AXS - Includes Flattop PowerLock
SRAM GX Eagle Rear Derailleur Pulley Kit
$33.50 $38.00 12% Off
GX Eagle Rear Derailleur Pulley Kit
SRAM Apex Pad & Holder
$34.00 $37.00 8% Off
Bolt on SRAM's Apex Pad & Holder for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!
SRAM GX 2x10 Trigger Shifter (Front)
$34.00 $37.00 8% Off
Get sharp, dependable, Exact Actuation shifting with SRAM's GX 2x10 Front Trigger Shifter. This left-side front shifter is compatible with SRAM's GX 2x10-speed components (sold separately) and brings championship technology to everyone. • Dedicated 2-speed front trigger shifter • Multi-position mounting • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams
SRAM PG-720 Cassette
$34.00
No mixed messaging or compromises here. The GX DH cassette was built with only one purpose in mind—exploiting gravity to its fullest lap after lap. This downhill-optimized 7-speed cassette provides gear steps that give each shift more purpose, and its compact design allows more spoke clearance. It’s a full-on, dedicated SRAM 1x cassette for gravity that lets you keep some money for a lift ticket. GX DH—Get Some. - The PG-720 cassette is an integral part of the SRAM 1x DH drivetrain system - This is the most affordable full-featured, dedicated 1x DH cassette in the industry - Fewer cogs allow for a faster transition from starting cog to highest cog - More rear wheel clearance around spokes - Fully compatible with the SRAM X01 DH drivetrain - Splined driver body compatible - Weight: 224 grams - Gear-Ratio:11 – 25T - Speeds: 7 - Recommended Group: GX DH
SwissStop Disc RS—SRAM eTap AXS
$34.99
The SwissStop Disc RS brake pad set offers a highly balanced combination of brake performance, durability and incredibly low noise in all conditions. - Delivers a smooth feel in the brake lever with predictable and progressive brake power - Provides extremely quiet operation in all environments - Features an organic compound that offers smooth modulation and is rotor-friendly - At 1.6mm thick the steel backplate saves weight over standard designs, yet provides the preferred thermal characteristics, strength and stability of steel - Compatible with SRAM Red eTap AXS (Gen2 2-Pc. Caliper), Force eTap AXS, Level Ultimate/TLM B1 (2020+), Level, Level TL/T; Avid Elixir 9/7/5/3/1/CR/R - Designed for ebike: Yes - Backing Plate Material: Steel - Compound: Organic
Bike Yoke Bike Yoke Shifty for SRAM 1x11/12
$35.75
Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting", because the rear derailleur is not able to react smoothly to the trigger´s action, since the shifting cable can not move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra low friction, even when playing in the dirt. Weight of Shifty pulley: 6.3g Every Shifty now comes with a bolt and axle kit, which allows installation of our Shifty on the popular GX Eagle and NX Eagle rear derailleurs, which normally use a riveted connection, instead of the bolt-on solution of the higher spec derailleurs. You just need to remove the original rivet and replace them with our bolt and axle. Shifty fits following rear derailleurs: - XX1 - XX1 Eagle - X01 - X01 Eagle - X01 DH - X1 - GX1 - GX Eagle* - EX1 - NX* - NX Eagle* For rear derailleurs marked with *, you will need to remove the original rivet and replace it with the bolt and axle from the BikeYoke Shifty kit. 1 Set Shifty includes: - 1x Shifty pulley - 6061-T6 aluminium, anodized - 1x axle - 1x bolt
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Top-pull)
$36.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and their GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Derailleur capacity: 14-tooth
SRAM GX Eagle Chain
$36.00
The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems
SRAM NX 11-speed X-Actuation Grip Shift
$36.00 $39.00 8% Off
SRAM's NX Grip Shift with X-ACTUATION technology gives you sharp, dependable shifting. Built for precise and swift shifting across our wide range 11-speed cassette, the NX Grip Shift brings industry changing technology to everyone. - SRAM 1x X-ACTUATION for precise and dependable 11-speed performance - Speed Metal shift indexing - Rolling Thunder ball bearing technology - Jaws lock-on grip technology - Most affordable fully featured 1x grip shifter in the industry - Color: Black - Weight: 144 grams (includes clamps, cable and JAWS lock-on grip) - Speeds: 1 x 11-speed
SRAM Rival eTap AXS Rear Derailleur Pulley Kit
$37.00
Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws
SRAM Force 12-speed Chain
$38.00
Beyond an incremental improvement. The Flattop technology of the SRAM Force chain creates a lighter, quieter, stronger chain. Ride far, long and fast—this chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts
SRAM Force AXS D1
$40.00
- Unique link shape creates a lighter, quieter, stronger chain. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Bottom-pull)
$40.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM GX 2x10 Trigger Shifter (Rear)
$41.00
Get sharp, dependable, Exact Actuation shifting with SRAM's GX 2x10 Rear Trigger Shifter. This right-side rear shifter is compatible with SRAM’s GX 2x10-speed components and offers precise, swift shifting across their wide-range 10-speed cassette. • Dedicated 10-speed rear trigger shifter • Multi-position mounting • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams
Park Tool CT-3.3 Chain Tool
$41.95
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf
SRAM GX 2x11 Front Derailleur (High Direct-mount, Bottom-pull)
$42.00
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically for SRAM 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11-speed rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM Pad Insert Carbon Rim (SRAM/Shimano)
$42.00 $45.00 7% Off
SRAM's Pad Inserts for carbon wheels are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary yellow compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.
SRAM GX 2x11 Trigger Shifter (Rear)
$45.00 - $49.00 $49.00 Up to 8% Off
Get sharp, dependable X-Actuation shifting with SRAM's GX 2x11 Rear Trigger Shifter. This right-side rear shifter is compatible with SRAM’s 2x11-speed components, offering precise, swift shifting across their wide-range 11-speed cassette. • Dedicated 11-speed rear trigger shifter • Multi-position mounting • Discreet clamp • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams
SRAM X-Sync Pulley Assembly
$45.00 $49.00 8% Off
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
SRAM GX DH X-Actuation Trigger Shifter
$46.00 $50.00 8% Off
The authentic click of the GX DH Trigger Shifter means it's time to sprint out of the corner, set up for the next big table, or put in that last kick to the finish line. A critical component in the lineup, the GX DH shifter is engineered in Germany to deliver clockwork-accurate shifting when you want it. GX DH—Get Some. - X-ACTUATION for precise and dependable 7-speed performance - Fully compatible with the SRAM X01 DH drivetrain
SRAM GX 2x11 Trigger Shifter (Front)
$47.00
Get sharp, dependable X-Actuation shifting with SRAM's GX 2x11 Front Trigger Shifter. This left-side front shifter is compatible with SRAM’s GX 2x11-speed components (sold separately) and brings championship technology to everyone. • Dedicated 2-speed front trigger shifter • Multi-position mounting • Discreet clamp • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams
Wheels Manufacturing Derailleur Hanger 421
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (1) M3x10 Flat Head Screw - DROPOUT-421 is NOT for use with SRAM AXS. Please see DROPOUT-422
SRAM Force Pad & Holder
$49.00 $53.00 8% Off
SRAM's Force Pad & Holder includes SwissStop pads for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!
SRAM GX Eagle Grip Shifter
$49.00
The GX Eagle shifters for the Eagle 1x12 drivetrains are high performance, moderately priced, and put total control of your gear selection in one hand. - Includes 2200mm cable - Updated SRAM twist mechanism for higher precision and increased durability - Rear Der/Shifter Compatibility: SRAM X-Actuation
SRAM GX Eagle Single Click Trigger Shifter
$49.00
The GX Eagle Single Click shifter has been optimized for the specific demands of E-MTB, designed to help eliminate premature chain wear and chain breaking by limiting the pull lever to a single engagement. With Eagle Colorsystem, it comes in the GX master colorway to go with any cassette and chain color choice you might go with—from Black to Gold to Rainbow to all-new Copper. - E-MTB specific—limits the pull lever to a single engagement to help eliminate premature chain wear and chain breaking - Master GX Eagle group colorway to match all cassette and chain colors as part of Eagle Colorsystem
SRAM GX Eagle Trigger Shifter
$49.00
Of all the components that make up a mountain bike drivetrain, the shifter doesn't exactly get a lot of spotlight time. But, as the rider's literal command and control center, the GX Eagle shifter is more than worthy of recognition. With intuitive thumb actuated triggers, the positive feel gives the right rider input to make shifts crisp and discernible every time. What's more, its already legendary reliability continues for all-day epics and all-time experiences. Plus, it features an aluminum trigger that's ready for inevitable punishment, as well as MatchMakerX compatibility. Precise and durable, it's the hard-working, no-compromise shifter keeping riders in the right gear, every ride. - Aluminum trigger designed for a positive lever feel - Master GX Eagle master colorway to match all cassette and chain colors as part of Eagle Colorsystem - Matchmaker compatible
SRAM GX-e X-ACTUATION Trigger Shifter
$49.00
Get sharp, dependable single-shift gear changes with the SRAM GX-e X-ACTUATION trigger shifter. Built for precise shifting across SRAM's wide range 11-speed cassette, the GX-e trigger shifter brings SRAM 1x technology to everyone. - SRAM 1x X-ACTUATION for precise and dependable - 11-speed performance - Dependable single-shift gear changes - Multi-position mounting - MatchMaker X compatible - Aluminum pull lever - Speeds: 11 - Derailleur Compatibility: 11s - Cable pull ratio: X-actuation - Cable length: 2200mm - Shifter type: Trigger - Matchmaker compatible - Clamp included - Max upshifts: 1 - Pull lever adjust: No - Multi-position: Yes - Gear indication: No
SRAM GX 2x11 Grip Shift (Rear)
$50.00 - $54.00 $54.00 Up to 7% Off
Designed for the most discerning, performance obsessed riders, SRAM's GX 2x11 Rear Grip Shifter features weight-saving construction and delivers outstanding speed and precision. SRAM's X-Actuation gives you precise and dependable 11-speed performance. This right-side rear shifter is compatible with SRAM's GX 11-speed derailleurs and cassettes. • Full metal, 11-speed indexing keeps shifting crisp and precise with Grip Shift • Three rows of ball bearings provide zero friction or play—reducing the force needed to shift and promoting long-term performance under all weather conditions with Grip Shift • Once the Grip Shift shifter and grip interlock securely, forged aluminum clamps on either end reinforce the assembly by locking tightly to handlebar • Weight: 144 grams
SRAM GX 2x11 Grip Shift (Front)
$51.00
Designed for the most discerning, performance obsessed riders, SRAM's GX 2x11 Front Grip Shifter features weight-saving construction and delivers outstanding speed and precision. SRAM's X-Actuation gives you precise and dependable front 2-speed performance. This left-side front shifter is compatible with SRAM's GX 2x11-speed front derailleur. • Full metal, 2-speed indexing keeps shifting crisp and precise with Grip Shift • Three rows of ball bearings provide zero friction or play—reducing the force needed to shift and promoting long-term performance under all weather conditions with Grip Shift • Once the Grip Shift shifter and grip interlock securely, forged aluminum clamps on either end reinforce the assembly by locking tightly to handlebar • Weight: 144 grams
SRAM GX Eagle GXP Left Crank Arm
$56.00
Replacement crank arm for GX Eagle GXP
SRAM Force 22 Front Derailleur
$58.00
SRAM's Force 22 Front Derailleur gives you the freedom to shift with incredible speed into either chainring. Experience precision shifting with YAW technology that allows the cage to rotate to better align with the chain and eliminates the need for shifter trim. An integrated chain spotter is included for seriously bumpy roads and cyclocross action. Paired with SRAM's X Glide R chainrings, unmatched front shifting will be the norm on your bike.
SRAM GX Type 2.1 10-Speed Rear Derailleur
$63.00 - $71.00 $71.00 Up to 11% Off
SRAM's GX 2x10 rear derailleur provides incredible shifting speed and precision. Exact Actuation technology eliminates slop and shifting variation. Roller Bearing Clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with Cage Lock technology, wheel removal and installation are easier than ever.
Wheels Manufacturing PF30 Adapter for 22/24mm Spindle Cranks
$64.05
Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Wolf Tooth 94 mm BCD for SRAM XO1, X1, GX & NX Crankset
$64.95
Designed to fit 94 BCD 4-Bolt cranks such as the SRAM X1 crank, these rings will provide maximal chain retention and minimal noise. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - 49mm chainline - Use of a clutch-style rear derailleur is recommended
Wolf Tooth 94mm BCD for SRAM XO1, X1, GX, and NX Crankset
$64.95
Looking for a SRAM XO1, X1, GX, and NX chainring with the proven chain retention of our patented Drop-Stop chainrings? Wolf Tooth has what you need in these beautifully machined 94 BCD bolt-on chainrings. Fits any 94 BCD SRAM crankset Drop-Stop technology. On Wolf Tooth patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris, which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment Compatibility - These rings fit any SRAM mountain bike crankset with a 94 BCD. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline: 49mm - Provides a great chainline on most boost bikes. Specifications - Mount type: 94 BCD - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Page 1 of 5 Next page