Your Search: "Eagle AXS"

From the start, 3T's goal for the Strada was the best aerodynamics AND comfort. Because without comfort, you won’t be able to maintain your aero position. While pushing the limits of aerodynamics and comfort in every detail, the Strada has two clearly distinct zones: Speed zone: the front half of the bike, with its ultra-deep yet narrow headtube, wrap-around downtube and bladed fork. Comfort zone: the curved seattube, slender seatstays and long exposed seatpost provide the ultimate comfort while also helping aerodynamics Tires provide more compliance than any other part of the bike. Wider tires are better at reducing shocks from cracks, curbs, cobbles and potholes, They even have lower rolling resistance, because their shorter contact patch requires less bending by the casing. In addition, wider tires reduce fatigue caused by high-frequency road buzz. But aerodynamics are also important on such rides, and the Strada remains the first aero bike engineered around wider tires (just like the Discus wheel range is engineered specifically around wider tires). Finally you can be fast and comfortable all day, every day, with one and the same bike. Frame - 3T Strada Integrale 2X (FD hanger is part of the frame) Frame material - Unidirectional pre-preg carbon, High-modulus/high-strength performance blend layup Fork - 3T Fundi Integrale Headset - 3T MinMax Integrale IS42/34 | IS47/38(36deg) Thru-axle - 100x12 front - 142x12 rear Handlebar - 3T Superergo Integrale LTD (XXS: 38cm - 51: 40cm - 54&56: 42cm - 58: 44cm) Stem - 3T Apto Integrale Stealth (XXS: 80mm - 51: 90mm - 54:100mm - 56: 110mm - 58: 120mm) Front Derailleur - Sram Rival AXS Rear Derailleur - Sram RIval AXS max 36T Shift/brake levers - Sram Rival AXS Brakes - Sram Rival AXS Hydraulic Disc w/ Sram 160mm rotor Crankset - Sram Rival AXS, 46-33T, narrow Q-factor (XXS: 165mm - 51: 170mm - 54&56: 172,5mm - 58&61: 175mm) Cassette - 12-speed Rival AXS 10-36T Wheelset - Fulcrum Rapid Red 900, 700c, 22mm internal width, tubeless ready (upgrade to 3T Discus 45|32 LTD possible) Tires - Pirelli PZero Road 700c Seatpost - Strada Seatpost for Ritchey Clamp Saddle - Selle Italia Model X Superflow

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec II brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers with Shimano brakes. Our BikeYoke I-Spec II adapters are available as "left" or "right" for Shimano brake levers but you can also flip sides if you prefer a more inward or outward remote position: Compatible brakes: - Deore BL-M6000 - Deore BL-501 - SLX BL-M7000 - XT BL-M8000/8020 - XTR BL-M 9000/9020 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec B brake and saves an extra clamp on the handlebars. They can also be used to mate SRAM triggers or other remotes with Shimano brakes. Left and right + flip-flop compatible. Compatible brakes: - SLX BL-M675-B - XT BL-M785-B - Zee BL-M640-B - Saint BL-M820-B Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapters are available as "left" or "right" side for Shimano brake levers and you can also flip sides if you prefer a certain more inward or outward remote position: Compatible brakes: - Deore BL-M6100/6120 - SLX BL-M7100/7120 - XT BL-M8100/8120 - XTR BL-M9100/9120 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS

Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting", because the rear derailleur is not able to react smoothly to the trigger´s action, since the shifting cable can not move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra low friction, even when playing in the dirt. Weight of Shifty pulley: 6.3g Every Shifty now comes with a bolt and axle kit, which allows installation of our Shifty on the popular GX Eagle and NX Eagle rear derailleurs, which normally use a riveted connection, instead of the bolt-on solution of the higher spec derailleurs. You just need to remove the original rivet and replace them with our bolt and axle. Shifty fits following rear derailleurs: - XX1 - XX1 Eagle - X01 - X01 Eagle - X01 DH - X1 - GX1 - GX Eagle* - EX1 - NX* - NX Eagle* For rear derailleurs marked with *, you will need to remove the original rivet and replace it with the bolt and axle from the BikeYoke Shifty kit. 1 Set Shifty includes: - 1x Shifty pulley - 6061-T6 aluminium, anodized - 1x axle - 1x bolt

GXP Boost 3mm Offset Thick Thin Chainring. Awesome chain line plus awesome chain retention enough said. - 12 spd Eagle compatible. - Designed and tested in MTB heaven, the Peak District. - Keeps your chain on!

SRAM's 1x Eagle component system boasts a twelve-speed cassette. We built pulleys that can handle the load better than stock. These CeramicSpeed Pulley Wheels work with less drag, adding to the power transmitted to the rear wheel while offering greater durability, going longer between replacement intervals. These pulleys are also fully compatible with the SRAM Eagle AXS derailleur. The aluminum pulleys with standard bearings are 34.4% more efficient than stock and use our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The upper and lower pulleys both have a narrow-wide tooth design with 14 teeth each. As the upper and lower pulleys have different tasks, they have different shapes. You'll find they are thus marked, and have directional arrows. These pulleys should be installed with stock SRAM pulley spacers. Save those from your old pulleys before installing CeramicSpeed. The kits come with CeramicSpeed Oil in a 15ml dropper bottle and grease in 5ml syringe. The bearings come pre-oiled. The grease can be used on the pulley bearings when riding in particularly harsh environments. In the box: - 2 x 14-tooth pulley wheels - CeramicSpeed Bearing Oil in 15ml dropper bottle - CeramicSpeed Grease in 5ml syringe - Sticker sheet

The OSPW X for SRAM Eagle Mechanical features a narrow wide tooth profile to ensure durable chain retention. The 14-tooth upper and 18-tooth lower pulleys reduce chain drag, while the custom-designed carbon fiber pulley cage ensures both durability and light weight. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/Oil: Pulley Oil - Compatibility: SRAM Eagle XX1, X01, GX, NX Mechanical - Compatibility Cassette: 10-52 tooth max - Spring Tension Settings: 3 - Speed: 12-speed - Discipline: Off-road and Gravity In the box: - A complete OSPW X system for SRAM Eagle Mechanical - CeramicSpeed Bearing Oil in a 15ml dropper bottle

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. Pulley Wheel Material: Aluminium The handbuilt OSPW System has two spring tension settings, that allows customised setup based on riding conditions. Pulley Wheels: CeramicSpeed 15-tooth upper and 19-tooth lower In the box: - Complete OSPW System for SRAM Red/Force AXS - CeramicSpeed Pulley Oil, 15 ml. dropper bottle - Custom tool for removal of stock cage and securing of OSPW System

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting for maximum efficiency. The handbuilt OSPW System has two spring tension settings that offer you customized setup based on riding conditions. This OSPW System is also compatible with the 2020 11-speed SRAM Red eTap derailleurs featuring a clutch. - Pulley wheels: CeramicSpeed 15-tooth upper and 19-tooth lower - Pulley wheel material: aluminum - Cage material: carbon-reinforced PA - Bearing options: CeramicSpeed Standard or Coated - Compatibility: SRAM Red AXS and SRAM Force AXS. 2020 SRAM Red eTap 11-speed derailleur with the orbit clutch. This system is also compatible with the wider-range Force AXS medium cage derailleur - Cassette Compatibility: Fits 12-speed 10-36 tooth cassettes. Fits 11-32 tooth cassettes when used with an 11-speed clutched derailleur - Spring Tension Settings: 2-spring - Speeds: 12-speed - Discipline: Road and Gravel/Cross - Custom tool included for removal of stock cage and securing of OSPW. The factory clutch mechanism will remain intact. There is no damage or modification to the clutch for the installation of the OSPW System In the box: - Complete OSPW System for SRAM Red/Force AXS - CeramicSpeed Pulley Oil, 15 ml dropper bottle - Custom tool for removal of stock cage and securing of OSPW System

The OSPW X for SRAM Eagle AXS features a narrow wide tooth profile to ensure durable chain retention. The 14-tooth upper and 18-tooth lower pulleys reduce chain drag, while the custom-designed carbon fiber pulley cage ensures both durability and light weight. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/Oil: Pulley Oil - Compatibility: SRAM Eagle AXS (Electronic) - Compatibility Cassette: 10-52 tooth max - Spring Tension Settings: 3 - Speed: 12-speed - Discipline: Off-road and Gravity In the box: - A complete OSPW X System for SRAM Eagle AXS - CeramicSpeed Bearing Oil in a 15ml dropper bottle

- Featuring FURTHER DRIVE Technology – consisting of two new tech features that are both aimed at making the OSPW X boost the Transmission group’s ability to perform efficiently over time. - Active Debris Remover (ADR) feature - a unique new dust cover design that sits safely anchored in a recess in the pulley wheel, thereby completely enclosing the bearing. This is paired with a bladed groove structure that surrounds the dust cover, and dynamically extracts debris from the pulley wheel while it’s rotating. - ADR is paired with the new 14-tooth and 20-tooth solid disc pulley wheels, simply known as the ALPHA. - The ALPHA Disc features a two-piece construction. A separate narrow-wide tooth profile produced in a composite material that offers prolonged wear protection and noise reduction. As well as a solid aluminum disc that eliminates the potential of external objects getting stuck between the spokes of the pulley wheel, while adding strength and stiffness to the Pulley Wheel design. - The FURTHER DRIVE Technology is combined with an entirely new cage structure utilizing increased material structure – without adding unnecessary bulk – that makes it perfectly in line with the robustness that the Eagle Transmission group is celebrated for. But the true value is found in the FURTHER DRIVE Technology’s ability to provide peak performance deep in races or in the season when riders need it the most. Faster now and faster down the line – Cover More Ground. In the box: Complete OSPW X System for SRAM Eagle AXS Transmission

The Oversized Pulley Wheel System for SRAM Red and Force AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. The handbuilt OSPW System has two spring tension settings, that allows customised setup based on riding conditions. This OSPW System is also compatible with the 2020 11 speed SRAM Red eTap derailleur featuring a clutch. Note; While there are visual similarities with the SRAM RED/Force AXS derailleurs, this OSPW system is not compatible with the SRAM Rival AXS, or SRAM RED, Force, or Rival XPLR eTap AXS rear derailleurs. Please see our Pulley Wheels for SRAM AXS Road In the box: Complete OSPW System for SRAM Red/Force AXS CeramicSpeed Pulley Oil, 15 ml. dropper bottle Custom tool for removal of stock cage and securing of OSPW System.

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features a 15-tooth upper and 19-tooth lower, aluminum pulley wheels with Grade 3 Silicon Nitride balls to provide absolute optimization of the rear derailleur Robust cage crafted from carbon reinforced polyamide for durability and light weight Two spring tension settings allow customized setup based on ride conditions Fits cassettes from 10 to 36-tooth Coated bearing races increase bearing service life by increasing hardness of race and reducing corrosion Only compatible with SRAM RED AXS and SRAM Force AXS

The CeramicSpeed Oversized Pulley Wheel System provides optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Features a 14-tooth upper and 18-tooth lower, aluminum pulley wheels with Grade 3 Silicon Nitride balls to provide absolute optimization of the rear derailleur The narrow wide tooth profile ensures durable chain retention Robust cage is crafted from carbon reinforced polyamide for durability and light weight Three spring tension settings allow you to customize performance and reduce chain drag Fits 10-50 tooth cassette range Coated bearing races increase bearing service life by increasing hardness of race and reducing corrosion

Convert your R45D Gen. 2, and R45D Centerlock hubs to XDR. Conversion kit is complete with axle and all driveshell internals for a plug and play swap to your R45D Gen. 2 and R45D Centerlock hub. - Ceramic Bearings - Compatible with SRAM Red eTap AXS, Eagle AXS, and all XDR and XD cassettes. - Compatible with R45D 6-Bolt Gen.2 hubs. Serial numbers will begin with 6910. - Compatible with all R45D Centerlock hubs. - Available with stainless steel or ceramic bearings. - 142x12mm axle. - Available in Silver or Black

The Eagle bars are our first ever set of 4-piece bars! Available in multiple heights to fit your preference, all Eagle bars maintain the same width and comfortable sweeps. Made from straight gauge 4130 chromoly steel tubing, combine with our TruTherm post-weld heat treatment process, these bars can take a beating. The dimensions and bends used on the Eagle bars give the classic 4-piece design a modern and updated look. TECH SPECS - Rise: 9-inches and 9.5-inches - Width: 29.5-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: Straight Gauge 4130 Chromoly Steel - Heat Treatment: TruTherm Post Weld Heat Treated - Weight: 37.7oz (9") / 38.5oz (9.5")

Kogel Oversized Kolossos Derailleur Pulley Sram eTap Red/Force Sram eTap version fits 12 speed Sram Red and Force Etap AXS derailleurs Also compatible with (post Sep. 2020) Red eTap A2 11sp derailleurs with the Hydro Clutch, NOT compatible with the original (pre Sep 2020) 11 speed etap derailleur Besides reduced friction, this cage is built with shifting accuracy, gravel worthiness and chain retention in mind Long tooth profile on lower pulley offers best possible chain retention Lower pulley assembly features a chain catcher to prevent jams Can be used dependably on or off road Oversized 14 and 19 tooth Kogel pulleys SPECIFICATIONS Model: Sram eTap AXS Road Seals Size: 14/19T

Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.

Designed to mount to our MTB Cranksets (KAPIC, KAPIC Carbon, R-Hawk, and MTB 2/INpower) these chainrings are specifically for 1x drivetrains on all-mountain and enduro bikes. It's fully compatible with 9, 10, 11, and 12-speed groupsets, giving you the perfect excuse to ditch your old 2x drivetrain for the efficiency gains and weight savings of a 1x set-up. Wide-narrow teeth mean you won't have to worry about the chain falling off, especially if you choose to ride without a chain guide. This chainring is CNC machined from 7075-T6 aluminum for a simplified design that saves approximately 40 grams compared to the ring, spider, and bolt combo you'd need with a more traditional chainring and crankset. This design also improves overall rigidity for powerful pedaling, as well as giving it slight advantages in the aero department. - 7075-T6 aluminum for optimal strength-to-weight - Direct-mount with Rotor KAPIC, KAPIC Carbon, R-Hawk, R-Raptor cranksets - Semi-aero design improves rigidity and aerodynamics - Wide-narrow teeth for chain retention with 1x set-ups - Compatible with 9, 10, 11, and 12-speed groupsets, as well as our 1x13 groupset - Compatible with SRAM AXS Eagle

Designed with ROTOR's oval chainring shape to take full advantage of your strongest pedaling point, the Direct Mount Oval chainring helps you get the most out of every trail ride and enduro race with less overall effort and fatigue required. This oval chainring is direct-mount compatible with Rotor R-Hawk and R-Raptor cranksets designed specifically for 1x drivetrains on all-mountain and enduro bikes. It's fully compatible with all modern groupsets, ranging from 9-speed through 12-speed drivetrains, giving you the perfect excuse to ditch your old 2x drivetrain for the efficiency gains and weight savings of a 1x set-up. Wide-narrow teeth mean you won't have to worry about the chain falling off, especially if you choose to ride without a chain guide. This oval chainring is CNC machined from 7075-T6 aluminum for a simplified design that saves approximately 40 grams compared to the ring, spider, and bolt combo you'd need with a more traditional chainring and crankset. This design also improves overall rigidity for powerful pedaling, as well as giving it slight advantages in the aero department. - 7075-T6 aluminum for optimal strength-to-weight - Oval chainring shape reduces the "dead spot" in pedal stroke - Direct-mount with ROTOR Kapic, INpower, 2INpower, RHawk, RRaptor cranksets - Semi-aero design improves rigidity and aerodynamics - Wide-narrow teeth for chain retention with 1x set-ups - Optimum Chainring Positioning personalizes to your pedaling - Compatible with 9, 10, 11, 12, and 13-speed groupsets (including SRAM AXS Eagle). - Weight: 51g per 32t

- From a long line of tough, light-weight chain engineering from SRAM - Coupling for 12-speed Sram Eagle chains - Chain connector type: PowerLock - Compatible with Sram Eagle SX, Eagle NX, Eagle GX, Eagle X01, Eagle XX1 models - No tools necessary to install - Color: RAINBOW - 50 Pack

Designed for use with T-Type chains, the Eagle Transmission PowerLock provides the same rugged dependability as its predecessors. For use with T-Type chains No tools required for installation Available in Black Oxide & Nickel + PVD Coating options

SRAM has optimized the Force AXS hood shape to provide increased finger wrap for more hand sizes, so you can stay secure sprinting for town lines, committing to the rut in a muddy CX race, or chattering down a long gravel descent. The acclaimed hydraulic brake provides excellent power and modulation for confident braking. AXS enabled for easy setup, personalization, and reliability eTap shift logic for intuitive shifting Optimized hood shape fits a wider range of hand sizes Carbon brake lever for light weight with textured shift paddles and hoods for control and comfort Reach Adjust to personalize fit for more hand sizes Wireless Blip compatible

Whether on the starting line or not, the X0 Eagle Transmission (T-Type) derailleur brings competition-tested prowess to riders who let their riding prove everything. Engineered as integrated and interdependent transmission components, the X0 Eagle Transmission derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface. This foundationally changes the entire relationship between cassette and derailleur. Beyond that, its Full Mount attachment method creates a far stronger connection that grips both sides of the frame. The new transmission derailleurs feature the same intuitive pairing and set-up procedure as our Eagle AXS derailleurs. While out on the dirt, it’s no exaggeration to say the X0 Eagle Transmission derailleur marks a seismic shift in robustness, allowing for common maintenance that serious riders demand. Featuring an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the B-knuckle and outer link that are fully replaceable, or upgradeable to the XX skid plate. Bottom line, the X0 Eagle Transmission derailleur changes the game while filling the need for premium componentry that’s been made to last. Hangerless Interface, Full Mount attachment method Competition proven strength and reliability Install and pair via the reliable and familiar standard AXS set-up and pairing procedure Premium precision made to last Overload clutch Replaceable B-Knuckle cover and outer link

Specifically engineered to optimize Eagle Transmission, the XX SL Eagle Transmission Flattop Chain features a unique flat top. Not only does this shape maximize shifting performance and robustness, but it also contemporizes the look of your super bike, especially with its outer plate cut outs and hollow pins that push the strength-to-weight ratio to an unprecedented level. Not suitable for E-MTB Flattop design specifically engineered for Eagle Transmission Ultimate shifting performance, game-changing aesthetics Super-light outer plates with cut-out design Includes PowerLock connector

The XX SL Eagle Transmission (T-Type) Cassette is a major reason why Eagle Transmission offers the best-ever inboard and outboard shifting performance under load. Thanks to its full X-Sync design, the harder you pedal, the better it shifts. Literally. Our lightest Eagle cassette in history lasts far longer and delivers more precision. Its new-gen design is fully machined, hardened steel X-Dome architecture for gears 4-12 and an ultra-lightweight, all-aluminum Spider Cog for gears 1-3. Engineered as integrated and interdependent transmission components, the XX Eagle Transmission Cassette and derailleur contact directly, ensuring perfect alignment on every bike. From its massive 520% gear range, the 52 tooth cog steps down with improved gear progression with 44 and 38 tooth cogs in the low end (compared to the Eagle drivetrain 10-52-tooth cassette). Featuring a clearly marked Setup Cog, install is both simple and fool-proof. — New-gen design is our lightest ever 10-52T cassette due to the ultra-lightweight, all-aluminum Spider Cog Full X-SYNC for best-ever inboard and outboard shifting performanceunder load Optimized gear steps on low end 55mm chainline compatibility for more moderate chain angle, longer wear and greater precision Setup Cog for fool-proof set up Utilizes well accepted and broadly available XD driverbody

Specifically engineered to optimize Eagle Transmission, the XX SL Eagle Transmission Flattop Chain features a unique flat top. Not only does this shape maximize shifting performance and robustness, but it also contemporizes the look of your super bike, especially with its outer plate cut outs that push the strength-to-weight ratio to an unprecedented level. Flattop specifically engineered for Eagle Transmission Ultimate shifting performance, game-changing aesthetics Super-light outer plates with cut-out design (Not suitable for E-MTB)

The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.

X01 Eagle Cable Anchor Kit