Your Search: "sram eagle"

The newly redesigned Eagle AXS Rocker Paddle gives the rider a traditional, familiar interface for their cutting-edge electronic control. Effortless electronic shifting paired with a more traditional-feeling actuation makes for quick assimilation of riders who are new to AXS and provides another ergonomic option for those who have run AXS previously. The controller's functions are customizable through the AXS app, allowing you to assign any action to any button. With AXS, you can truly make your cockpit your own. - Customize in-board and outboard shift options - AXS-enabled components can be programmed and personalized using the SRAM AXS App.

SRAM Bleeding Edge Tool. - Use with Avid or SRAM Pro Bleed Kit

Designed for use with T-Type chains, the Eagle Transmission PowerLock provides the same rugged dependability as its predecessors. - For use with T-Type chains - No tools required for installation

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Service all SRAM brake lever pivot bearings with this easy-to-use bearing press. Keep all of the SRAM brake pivots feeling snappy and ready to ride. Features - Easily replace or install pivot bearings in SRAM brake levers - For use with CODE RSC, X0 Trail, Level Ultimate, Guide Ultimate/RSC, G2 Ultimate

The basis of every Eagle drivetrain is its chain—and the NX Eagle chain is designed and manufactured using genuine SRAM Eagle architecture, so it is fully compatible with every other component in the Eagle ecosystem. The NX Eagle chain features solid pin construction, Eagle PowerLock, and smooth, efficient shifting that you can count on every time out. Features/Specs - Eagle PowerLock chain connector with FLOW LINK technology provides better chain-guiding and increased longevity - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings - Weight: 278g (126 links) - Material: steel - Speeds: 12 - Compatibility: All levels of Eagle drivetrain systems

- X01 Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5

- XX1 Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5

GX Eagle Rear Derailleur Pulley Kit

The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems

The SX Eagle Single Click Trigger Shifter ensures drivetrain durability with its single click shifter option designed for E-MTB use. - E-MTB specific Eagle shifter option limiting the pull lever to a single engagement

Compatible with all other SRAM Eagle drivetrains, the SX Eagle Trigger Shifter keeps the promise of a simple shift. SX Eagle means easy, intuitive shifting every time for every rider.

Original equipment rear derailleur pulleys for SRAM rear derailleurs. Replacement pulley kit for SRAM GX Eagle AXS rear derailleurs 12t upper and 14t lower pulley wheels Includes 13mm and 14mm pulley bolts

Replacement hoods for SRAM hydraulic shifter/brake levers.

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Boost 3mm offset

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Non-Boost 6mm offset

The radical new look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear. - Can be used with Eagle 12 speed or SRAM 11 speed chains - Direct mount rings with 3mm offset fit Boost geometry Eagle cranks; direct mount rings with 6mm offset fit traditional geometry - Eagle cranks and GXP spindle XX1, X01, X0, X1 and X9 cranks

New NX Eagle trigger shifter means on-demand gear selection throughout the entire wide range Eagle cassette. The massive range means you never have to worry about having the right gear for the terrain. NX Eagle means easy, intuitive shifting every time for every rider. - Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents. - Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. SRAM guarantees this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Eagle Technology creates a smoother and more precise shifting system with exceptional reliability. - Available as a E-MTB specific Eagle shifter option limiting the pull lever to a single engagement. - Speeds: 12 - Derailleur Compatibility:12s - Cable pull ratio: X-actuation - Cable length (SL): 2200mm - Shifter type: Trigger - Matchmaker compatible: Yes - Clamp included?: Yes - Max upshifts: 5 - Pull lever adjust: No - Multi-position: Yes - Gear indication: No

The New NX Eagle single click trigger shifter limits over-shifts that rob performance and battery life on E-MTBs. Designed to precisely control gear selection in higher-torque and lower-cadence E-MTB applications, the NX Eagle single click shifter also helps to increase the life of the entire drivetrain NX Eagle means easy, intuitive shifting every time for every rider. - E-MTB specific Eagle shifter that limits the pull lever to a single engagement. Just like SRAM has on their EX1 shifters, this helps eliminate pre-mature chain wear and chain breaking. - Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents. - Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. SRAM guarantees this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Eagle Technology creates a smoother and more precise shifting system with exceptional reliability. - Speeds: 12 - Derailleur Compatibility:12s - Cable pull ratio: X-actuation - Cable length: 2200mm - Shifter type: Trigger - Matchmaker compatible: Yes - Clamp included?: Yes - Max upshifts: 1 - Pull lever adjust: No - Multi-position: Yes - Gear indication: No

The GX Eagle shifters for the Eagle 1x12 drivetrains are high performance, moderately priced, and put total control of your gear selection in one hand. - Includes 2200mm cable - Updated SRAM twist mechanism for higher precision and increased durability - Rear Der/Shifter Compatibility: SRAM X-Actuation

The GX Eagle Single Click shifter has been optimized for the specific demands of E-MTB, designed to help eliminate premature chain wear and chain breaking by limiting the pull lever to a single engagement. With Eagle Colorsystem, it comes in the GX master colorway to go with any cassette and chain color choice you might go with—from Black to Gold to Rainbow to all-new Copper. - E-MTB specific—limits the pull lever to a single engagement to help eliminate premature chain wear and chain breaking - Master GX Eagle group colorway to match all cassette and chain colors as part of Eagle Colorsystem

Of all the components that make up a mountain bike drivetrain, the shifter doesn't exactly get a lot of spotlight time. But, as the rider's literal command and control center, the GX Eagle shifter is more than worthy of recognition. With intuitive thumb actuated triggers, the positive feel gives the right rider input to make shifts crisp and discernible every time. What's more, its already legendary reliability continues for all-day epics and all-time experiences. Plus, it features an aluminum trigger that's ready for inevitable punishment, as well as MatchMakerX compatibility. Precise and durable, it's the hard-working, no-compromise shifter keeping riders in the right gear, every ride. - Aluminum trigger designed for a positive lever feel - Master GX Eagle master colorway to match all cassette and chain colors as part of Eagle Colorsystem - Matchmaker compatible

Get sharp, dependable single-shift gear changes with the SRAM GX-e X-ACTUATION trigger shifter. Built for precise shifting across SRAM's wide range 11-speed cassette, the GX-e trigger shifter brings SRAM 1x technology to everyone. - SRAM 1x X-ACTUATION for precise and dependable - 11-speed performance - Dependable single-shift gear changes - Multi-position mounting - MatchMaker X compatible - Aluminum pull lever - Speeds: 11 - Derailleur Compatibility: 11s - Cable pull ratio: X-actuation - Cable length: 2200mm - Shifter type: Trigger - Matchmaker compatible - Clamp included - Max upshifts: 1 - Pull lever adjust: No - Multi-position: Yes - Gear indication: No

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Designed for use with SRAM Wide Cranksets - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard

Replacement crank arm for GX Eagle GXP

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

It might look normal from the outside, but the engineering inside this incredible chain design is anything but normal, and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life.