29-Inch

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology - 28H i9 Rims - 15x110 and 15x157 hub spacing - Micro Spline 6B

Double Wheelbag for mountain bike and road bike wheels.

The all-new M5 Pro builds upon a legacy of cross-country racing performance with the ultimate balance of weight savings, power transfer, and durability. The “Pro” designation indicates the M5’s no-holds-barred approach to its development and racing pedigree. Built to ENVE’s INNERDRIVE hubs, the M5 Pro is ready for the most challenging XC race tracks. The M5 Pro marks a new era in M Series cross-country wheels, raising the bar for speed, efficiency, and toughness. It is the result of a more than four-year development project during which ENVE worked closely with its professional athletes to create something that would give the fastest endurance athletes an edge. Unique front and rear rim construction combined with an all-new shallow rim shape offer an unmatched blend of characteristics, designed to go far and fast. Built for cross-country race applications 1325g total system weight with tape and valves Front and rear-specific construction and geometry Inner-Rim Width Front: 29mm Inner-Rim Width Rear: 27mm Wide Hookless Bead - XC optimized anti-pinch flat protection Alloy external nipples with Nyloc thread-locking inserts Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection Included: Tubeless tape & valve pre-installed QTY (2) - Spare Spokes + Nipples Wheel Manual Wheel Build Card

What It Is A purpose-built XC wheelset without limitations. Light enough to race, strong enough to ride daily. Reduced fatigue and a more compliant ride through shape, laminate, and spoke-hole optimization. Who It's For Modern XC racers and riders who demand equal uphill and downhill performance, light weight, durability, and vertical compliance for long hours in the saddle. Why We Made It Carbon fiber is responsible for unlocking the potential of bigger and wider tires on mountain bikes. Today, riders can improve comfort, efficiency, and control by adapting their mountain bikes perfectly for the terrain and trails. Undoubtedly, this means they can go further and faster with more confidence. Complement increased tire volumes and rim widths with a modern XC tread, and you've got an effective system, maximized for the variable-pitch trail. The result is a purpose-built full-carbon fiber XC wheelset that is lighter, wider, and more vertically compliant without sacrificing strength or reliability. Additionally, the M525 features ENVE's patent pending, wide hookless beads that improve pinch flat resistance and allow riders to run modern lightweight XC tires with a reduced risk of pinch flatting or impact damage.

- Tuned for modern XC riding and racing - Light enough to race, strong enough to ride daily - Wide hookless bead dissipates impact energy and prevents pinch flats - 40% increase in impact toughness, 50% more flat resistant - Ride Tuned – smooth, compliant ride improves focus and reduces fatigue - Center lock hubs do not include rotors

The new M6 is the everyday, any-trail wheel designed for long rides in the mountains — where reliability matters as much as every gram shaved. It's built off what we learned from our M5 Pro race wheel, with an all-new shape and carbon layup to deliver more traction, durability, and comfort than anything else in its class. Like all new M Series wheelsets, the M6 features unique rim shapes and construction front and back and is built to ENVE’s proven INNERDRIVE mountain hubs. Like all new M Series wheelsets, the M6’s rims feature unique front and rear rim design. To accommodate the modern trail rider’s preference for 2.3-2.5” wide tires, the M6’s front rim features an internal rim width of 32mm, and the rear is 29mm. The front rim’s additional width and lighter construction maximize compliance, traction, and tire stability. The rear rim has been optimized for power transmission and durability. Cross-Country, Down-Country, Trail Applications 29” - 1575g, 29”/27.5” - 1544g Front and rear-specific construction and geometry Inner-Rim Width Front: 32mm Inner-Rim Width Rear: 29mm Wide Hookless Bead - Trail-optimized anti-pinch flat protection Brass external nipples with Nyloc threaded locking insert 28-hole front and rear E-MTB usage - Up to 75nm Made in USA Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection Tubeless tape & valve pre-installed QTY (2) - Spare Spokes + Nipples Wheel Manual Wheel Build Card

What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.

What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.

What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.

This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.

The new M8 is a wheelset designed for aggressive gravity and eMTB riding, from enduro to downhill. It’s built off what we learned from our M9 race development, with additional weight considerations for longer days on the trail. The new shape and features deliver more traction, durability, and comfort which translates to more speed and less fatigue. It features ENVE’s patented Wide Hookless Bead pinch flat prevention technology and is built to the proven ENVE Innerdrive hub system. Enduro, Gravity Race, E-MTB 29” - 1983g, 29”/27.5” - 1961g Front and rear-specific construction and geometry Inner-Rim Width Front: 32mm Inner-Rim Width Rear: 29mm Wide Hookless Bead - Gravity-optimized anti-pinch flat protection Brass external nipples with Nyloc thread locking insert Round spokes 28H Front, 32H Rear Recommended for E-MTB Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection Includes: Tubeless tape & valve pre-installed QTY (2) - Spare Spokes + Nipples Wheel Manual Wheel Build Card

The new M9 Pro is the decisive gravity wheelset, developed with Commencal/Muc-Off, Frameworks Racing, The Union, Brendan Fairclough, and other professional gravity athletes. It is the fastest, most reliable downhill wheel on the market. The M9 Pro wheels feature our patented Protective Rim Strip, which ensures the tire will hold air to the bottom of the mountain, no matter what impacts it may face. Featuring ENVE’s proven INNERDRIVE hubs, the M9 Pro is ready for gravity racing, freeride, bike park, enduro, or any aggressive riding that demands the best ride feel and reliability available. The all-new M9 Pro is ENVE’s flagship wheelset for gravity and downhill racing, embodying the pinnacle of athlete-driven development. While new to the market, it has already made a significant impact in the 2024 World Cup racing season, securing podium positions in every race and continuing the M Series' legacy as the most successful wheelset in World Cup downhill history. Enduro, Gravity Race, E-MTB 29” - 2236g, 29”/27.5” - 2186g Front and rear-specific construction and geometry Inner-Rim Width Front: 29mm Inner-Rim Width Rear: 29mm Protective Rim Strip - Anti-pinch flat and tire pressure retention system Brass external nipples with Nylock Round spokes 29” F & R, 27.5” Rear Only 28H Front, 32H Rear Recommended for E-MTB Backed by ENVE’s 5-year Factory Warranty and Incidental Damage Protection Included: Tubeless tape & valve pre-installed QTY (2) - Spare Spokes + Nipples Wheel Manual Wheel Build Card

With the The ENVE x Scicon Aerocomfort TSA 3.0 Bike Bag in as little as five-minutes, your bike can be packed, and you can be heading to the airport with your bike in tow. This is a soft-sided bike case made for the traveling road or gravel cyclist. The unique design allows the handlebars and saddle to remain in place, with the wheels being the only components needing removal. Secure front and rear axle mounts for quick release and thru-axle bikes ensure the best protection possible. Features: Separate wheel compartments in addition to extra pockets, a gear bag, and a storage bag for your case when you arrive at your destination. Subtle ENVE logos on the wheel compartments, setting it apart from the rest. Weight: 10.5 Kg External Dimensions: 115x95x28 cm

- Lighter, wider, stronger and more flat resistant - Ride Tuned – Smoother ride improves tracking, control, and reduces fatigue - Wide hookless bead dissipates impact energy and prevents pinch flats. - 30% increase in impact toughness, 60% more flat resistant - Optimized for 2.3-2.5" tires

This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.