Use Code ACCESS12 for 12% off Shoes, Pedals, Helmets, Lights, Locks and Bags

Don't underestimate the power of new pads! The Register Helmet Pad Kit replaces your worn-out pads by improving the comfort, fit, and stability of your helmet while wicking away moisture.

Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters

• Vinyl coated hooks • 9 mm diameter • Black

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Replacement seat post mount for the Tuck e-Bike Taillight. Secure design with non-slip strap ensures light is stationary even in rough, bumpy terrain. - Includes plastic wedge spacers to ensure Tuck mounts at optimum angle for premium visibility

Attaches Blackburn Local Lights to any rack.

Bell Transfer 9 Visor: Replace your lost, broken or worn-out visor with a genuine Bell replacement part designed to fit almost every Bell helmet. Order the Bell visor for your specific Bell helmet. The genuine Bell visor fits just like the original but may or may not have highlighted Bell logo. This replacement Bell visor helps to keep the sun and branches out of your eyes as you travel the roads or tear up the trails. NOTE: The visor does not include mount bolts.

Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.

SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights

Replacement Wahoo Puck for Fabric Lumaray light mount

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

Composite wear plate protects cleat mounting area on Drako Carbon SRS soles.

Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

A set of three blocks secures almost any U-lock to almost any stem and handlebar. The mounting position is balanced and stable.

Jandd prides selvthemes on making the best gear possible, from their massive expedition packs right down to what is probably our most basic item: the accessory strap. Accessory straps may be simple, and are usually taken for granted, but have an inferior accessory strap break on you and you'll appreciate Jandd's attention to detail. All Jandd accessory straps are made of 1" nylon webbing and a Duraflex® impact resistant 6/6 nylon TensionlockTM buckle. Sold in pairs, black only. Fitting Instructions: Fig. 1 Weaving an accessory strap through a sewn-on plastic lash tab. Fig. 2 Tightening accessory strap onto foam pad to carry on top of a pack. Fig. 3 To slip an accessory strap through the bi-directional webbing lash points found on many Jandd packs, double the webbing over a pen and slip it through the long dimension of the lash tab.

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Coyote MIPS, Coyote - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

To validate our warranty and prevent sole cracking, SIDI Reinforcement Plate (or similar from crankbrothers and Look) highly recommended for use with dual retention-bar style MTB pedals (crankbrothers, Time and Look). The plate is not required on Drakos or with Shimano-style pedals.

Features - Required fender mounting bracket when installing the Rack-It Metro E rack to E-Bikes with fenders - Provides the needed support for the rear fender when upgrading to the Rack-It Metro E Rack

- Universal design - Use: Fits single rail

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

Unicrown sliding plate - a non-offset, slotted plate; generally used for the upper mounting plate on unicrown construction forks.

Replacement strap for all Sidi caliper buckle models including: - Kaos - Genius - Cape - Dominator - Level - Buvel Includes two straps!

The KryptoFlex 525 Seatsaver Cable is a 2.5-foot cable ideal for securing your bike's seat and seatpost. It's 5mm braided steel cable provides increased cut resistance and the vinyl coating protects bikes and equipment from scratches. The KryptoFlex 525 cable is 3/16-inch x 2.5-feet.

Keep your stuff safe with Kryptonite's Gripper Combination Padlock. It sports a steel body and a hardened steel shackle for serious strength and protection.

Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size