Cycling Shoes

Schurter fans and cross-country addicts, come and see the light(weight)! Thanks to input from Nino Schurter, we have the lightest, stiffest and most exotic shoe for you. Our ultra minimalist SCOTT MTB RC SL Carbitex shoe is built on an HMX carbon sole with a Corecell foam core for even more weight savings and ultimate power transfer. Dual BOA IP-1 dials secure the Carbitex carbon fiber uppers for a highly conforming fit. A super outsole with minimal Sticki rubber tread completes this world-beating race shoe. - Zero loss of power - Extreme Stiffness - index 10 - Carbitex upper - HMX carbon sole - Ultra lightweight - BOA system w/ micro adjustment - Sticki Rubber - ErgoLogic adjustable insole

Our Supersonic Collection of products was developed with one thing in mind - pure race speed. When you're up against the clock or your fiercest rivals, know that you have the necessary products to break all barriers. Our ultra minimalist SCOTT MTB RC SL Supersonic Edition has an HMX carbon sole with a Corecell foam core for even more weight savings and ultimate power transfer. The dual-zone BOA Li-2 Fit System secures the Carbitex carbon fiber uppers for a highly conforming fit.

Racers and Strava KOM junkies, come and see the light(weight)! When only the lightest, stiffest and most exotic will do, we have the shoe for you. Our ultra minimalist SCOTT Road RC SL Carbitex shoe is built on an HMX carbon sole with a Corecell foam core for even more weight savings. Dual BOA IP-1 dials secure the Carbitex carbon fiber uppers for a highly conforming fit that allows you to transfer all your energy to the pedals. - Zero loss of power - Extreme Stiffness - index 10 - Carbitex upper - HMX carbon sole - Ultra lightweight - BOA system w/ micro adjustment

Our Supersonic Collection of products was developed with one thing in mind - pure race speed. When you're up against the clock or your fiercest rivals, know that you have the necessary products to break all barriers. Our ultra minimalist SCOTT Road RC SL Supersonic Edition shoe is built on an HMX spread tow carbon sole. A dual-zone BOA IP1 Fit System secures the Carbitex carbon fiber uppers for a highly conforming fit that allows you to transfer all your energy to the pedals.

Step into Wølfgar, the world's most advanced winter cycling boot. We've combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice. Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air. On the inside, Wølfgar's reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Upper: Waterproof suede upper - Midsole: Lightweight EVA midsole - Outsole: Rubber outsole with microglass lugs and 2-bolt cleat pattern - Insulation: Removable wool and faux fur boot liner for quick drying and warmth - Closure: Dual zone BOA fit system - Lasts: XX-wide last with tall toe box for extra insulation on top of the foot - Sizes: Mens wide 36–50 (no size 49), full sizes only - Suggested Temperature Range: -25°F (-31°C) to 10°F (-12°C)

Bringing a pop of color and style to the peloton, the Limited Edition RC902S Champagne colored shoes are supremely engineered for your fastest efforts. With its ultra sleek lines, optimal power transfer, and refined pro-grade features, the RC903S is the culmination of our most advanced technologies for a performance elevating race shoe that feels and functions unlike anything you’ve worn before. • Special Edition Champagne colorway of the flagship RC903 shoe • Premium Road Cycling Shoe: S-PHYRE RC903S is a high performance road racing shoe compatible with SPD-SL cleats • Precise Fit: dual low-profile BOA® Li2 metal dials deliver quick and precise micro-adjustments • Optimum Stiffness: reduces energy loss and maximizes power transfer • Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration • Breathable Shoe: lightweight micro-fiber leather upper with perforated venting keeps feet cool during even your sweatiest pursuits • Cleats sold separately

Technical Details: - Racer Fit for snug upper - Bounded upper all seamless for comfort to prevent pressure points - Integrated double X-Comfort Zone for a large range of feet width - BOA Li2, a new mechanism that generates higher power with finer resolution - PowerZone Technology for better ankle support and stability - Lace system with 4 independent adjustment zone to maximized comfort during long rides - 100% Carbon sole with Patented Air Chanel for constant airflow to prevent fatigue and numbness - 3D insoles with 3 adjustable arches for a custom fit - 7.9oz / 225g (size 42)

Supremely engineered for your fastest efforts. With its ultra sleek lines, optimal power transfer, and refined pro-grade features, the RC903 is the culmination of our most advanced technologies for a performance elevating race shoe that feels and functions unlike anything you’ve worn before. Features: - Premium Road Cycling Shoe: S-PHYRE RC903 is a high performance road racing shoe compatible with SPD-SL cleats - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Breathable Shoe: lightweight micro-fiber leather upper with perforated venting keeps feet cool during even your sweatiest pursuits - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The RC903 takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.

Supremely engineered for your fastest efforts. With its ultra-sleek lines, optimal power transfer, and refined pro-grade features, the RC903 is the culmination of our most advanced technologies for a performance-elevating race shoe that feels and functions unlike anything you’ve worn before. Unrivaled speed Features: - Premium Road Cycling Shoe: S-PHYRE RC903 is a high-performance road racing shoe compatible with SPD-SL cleats - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Breathable Shoe: lightweight micro-fiber leather upper with perforated venting keeps feet cool during even your sweatiest pursuits - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The RC903 takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.

Supremely engineered for your fastest efforts. With its ultra-sleek lines, optimal power transfer, and refined pro-grade features, the S-PHYRE RC903 Women’s is the culmination of our most advanced technologies for a performance-elevating race shoe that feels and functions unlike anything you’ve worn before. Unrivaled speed Features: - Premium Road Cycling Shoe: S-PHYRE RC903 Women’s is a breathable, high-performance SPD-SL road racing shoe - Precise Fit: dual low-profile BOA® Li2 dials deliver quick and precise micro-adjustments - Optimum Stiffness: reduces energy loss and maximizes power transfer - Anti-twist Heel Cup: stabilizes heel to help manage the intense twisting forces caused by explosive acceleration - Women’s Sizing: designed with a women’s specific last for a natural, comfortable fit. - Cleats sold separately BUILT FOR PERFORMANCE Anti-twist stabilizing structure within the heel cup offers unparalleled stability during explosive sprints. DYNALAST technology secures your foot in place, reducing power loss at the pedal and lessening fatigue during long rides, while the optimized toe-spring section reduces tension in your feet, calves, and hamstrings - so you can go further, faster. EXCEPTIONAL FIT How a shoe fits and feels defines its performance. The S-PHYRE RC903 Women’s takes both to the next level with a 360º surround wrapping upper, a refined toe box fit, and a low-profile crossover lacing pattern with two BOA® Li2 dials for the most precise fit possible.

The Shimano Men's SH-RC903 S-Phyre Road Shoe is the next generation in ultimate performance. For the new 903s Shimano took the best and made it better, adding more ventilation, a more comfortable fit, and reducing weight. From the ground up, the 903 starts with the same Shimano ultra stiff carbon sole (12 on their stiffness index) for unrivaled power transfer. For this iteration it's now ventilated at the heel and toe to keep your feet from overheating during your hardest efforts. The fit is improved with a new 2-way BOA Li2 system to get your precise fit dialed in every time. The lacing has been updated to get you a more secure fit without hot spots, especially on the toe box. Combined with the supportive but flexible microfiber leather upper and redesigned anti-twist heel cup, this shoe is made to keep your feet locked in so you can stay focused on any sprint, climb, or descent you're pushing to the limit. And with a claimed weight of just 225 grams in a size 42, the 903 comes in at least 10 grams lighter than the 902. FEATURES: Shimano Stiffness Index: 12 Carbon Sole Ventilated Toe and Heel Dual microadjustable BOA Li2 dials Anti-twist heel cup

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The Lake CX332 Road Shoe is a classic design with modern elements such as Dual BOA closure & a light weight carbon sole system. The CX332 also draws from the same Thermaform technology as found in the CX403. The Internal heel counter is heat moldable carbon that gives the option to better customize the heel hold. A secure heel hold will stabilize the foot and eliminate heel slip. A stable foot allows for more power transfer and less fatigue. Form fitting Natural leather upper in combination with the dual BOA closure system ensures that your foot will be secure without needing to over tighten the shoe. The CX332 utilizes Lake's patented double sole system. The inner sole is a semi flexible fiberglass platform that allows some flexibility at the ball of the foot where the foot tends to swell, and typically hot spots or numbness would occur. The inner sole is suspended over the outer rigid carbon sole. This system enables the CX332 to use an extremely stiff carbon outsole without sacrificing riding comfort. CX/TX RACE Last – Featuring a slightly narrower toe box & tighter heel than the Competition last and less overall volume than the Sport last. Designed for very high-cadence riding & higher pressure and a slimmer fit. Lake Race 100% Carbon Fiber Sole, Lake patent Double Sole. Available in 3 hole cleat pattern or Speedplay specific. Klite Kangaroo leather and mesh or Clarino Microfiber (White/White Microfiber only). Outlast temperature regulating heel & tongue liner. Internal Heat Moldable Thermaform Carbon Fiber heel counter. Dual Side mounted IP1 Boa lacing system

Our Supersonic Collection of products was developed with one thing in mind: pure race speed. When you're up against the clock or your fiercest rivals, know that you have the necessary products to break all barriers. Our ultra-minimalist SCOTT MTB RC SL Supersonic Edition has an HMX carbon sole with a Corecell foam core for even more weight savings and ultimate power transfer. The dual-zone BOA Li-2 Fit System secures the Carbitex carbon fiber uppers for a highly conforming fit. - Unique and limited-edition design - Extreme stiffness index 10 - Carbitex upper - HMX carbon sole - Dual BOA Fit System

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

MXZ400 from Lake.

ULTIMATE XC RACING SHOES WITH PRO-GUIDED DESIGN ARE ENGINEERED TO DOMINATE. FEATURES: - Uncompromising Cross Country MTB and Cyclocross racing shoe with the lightest ever structure. - Lightweight SHIMANO ULTREAD XC rubber outsole with a highly technical tread pattern creates the ultimate racing grip. - Rider-tunable talon-shaped metal spikes allow riders to choose ultra-lightweight performance or ultimate traction. - Dual low-profile BOA Li2 dials allow quick and precise micro-adjustment. - Surround wrapping upper with function-specific zones and scientifically optimized materials to maximize fit and pedaling performance. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency. - Adjustable powerzone lace guide securely holds forefoot.

To make a full-featured shoe that rivals minimalist designs in weight, we created the imperial road shoe, which features our own ultralight monofilament Synchwire mesh upper that fits and feels like a second skin. The Imperial's Synchwire upper features Boa IP1 dials and soft lace guides, which allow you to adjust your fit on the fly while reaping the benefits of the shoes light weight. Thermal-welded Teijin TPU adds structural support exactly where it's needed, and a high-modulus Easton EC90 SLX2 carbon fiber plate provides ultimate stiffness-to-weight for power transfer. Our adjustable Super Natural Fit footbed system is the final touch, allowing you to customize arch support right out of the box for luxurious comfort and optimal pedaling efficiency. - One-piece Synchwire upper design with soft lace guides - Teijin welded SL monofilament mesh - Twin Boa IP1 dials featuring 1mm +/- micro adjustment and incremental release - Easton EC90 SLX2 high-modulus carbon - Stainless steel hardware - Replaceable heel pads - Supernatural fit kit with adjustable arch support - XT2 anti-microbial fiber top sheet - 215 grams (size 42.5)

Make no compromises Simply our fastest, most advanced mountain shoe ever. The XXX mountain bike shoe was designed for those that demand the most of themselves and their equipment. It's the exceedingly light, stiff, zero-compromises trail shoe for XC and CXC racers that value efficiency, minimal weight and maximum stiffness. Product details - inForm Pro last delivers an ergonomically optimized, high-performance fit - 100% OCLV carbon sole is extremely lightweight and stiff for efficient power transfer - Dual, independent Boa IP1 dials for precise, zone-specific fit adjustments - Lightweight and luxurious TPU upper material for supportive comfort and perfect perforation pattern for breathability - Stiffness index 14 of 14 - Asymmetrical design and superior lace routing system reduces top-of-foot pressure while providing a more secure fit - External heel cups and no-slip heel lining prevent slippage and chafing while reacting to your movements more quickly - Durable GnardGuard outer material protects against abrasion and fights debris

Ride what the pros ride The most sophisticated road cycling shoe on the planet. XXX is professional grade from heel to toe. It's meticulously constructed of the most luxurious materials available, and renowned for its tailored fit and unparalleled pedaling efficiency. This attention to detail has made XXX one of the most sought after race shoes by the world's best riders. Product details - inForm Pro last delivers an ergonomically optimized, high-performance fit - 100% OCLV carbon sole is extremely lightweight and stiff for efficient power transfer - Dual, independent Boa IP1 dials for precise, zone-specific fit adjustments - Lightweight and luxurious TPU upper material for supportive comfort and perfect perforation pattern for breathability - Stiffness index 14 of 14 - Asymmetrical design and superior lace routing system reduces top-of-foot pressure while providing a more secure fit - External heel cups and no-slip heel lining prevent slippage and chafing while reacting to your movements more quickly - Neoprene pads at top of the tongue reduce pressure against dorsal tendon for better mobility

Technology and comfort intersect in the SCOTT Road RC Ultimate shoe. We've combined Carbitex, a structural carbon fabric, with a textile mesh for superior comfort and breathability in the upper while allowing you to transfer all your energy to the pedals. HMX carbon fiber with a Corecell foam core provides unrivaled stiffness and lightweight in the sole. All the benefits of our lightest, most exotic materials are wrapped into this all-day shoe for elite racers and Fondo riders alike. - Zero loss of power - Extreme Stiffness - index 10 - Carbitex straps - HMX carbon sole - Ultra lightweight - BOA system w/ micro adjustment

Introducing Helix, the new standard in performance footwear. Bont Cycling’s race-proven anatomic fit is now even further enhanced by a newly reimagined closure system. Experience performance and comfort without compromise like never before. - Model: Helix - Material: Unidirectional Carbon Monocoque Chassis with Durolite upper - Stack Height: 3.6 mm - Air Vents: Ventilation via air vents on front bumper and perforated upper - Innersole: EVA thermo-moldable - Sole Guards: Replaceable - Padding: Memory Foam - Cleat Mounting: MM grid plus grip / 3 Hole Look Configuration - Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin - Closing Options: BOA IP1 Dual Dial Retention System with Kevlar wiring - Weight: 260 grams (Size 46.5)

KEY PERFORMANCE FACTORS SUPERIOR POWER TRANSFER An all-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber for superior toe-heel stiffness. The unique design significantly boosts power transfer while allowing enough torsional flex for natural foot movement. This helps minimize lower leg strain during the pedal stroke with zero watts wasted. PERSONALIZED FIT Most cycling shoe enclosures press the foot down toward the sole. The Surge Pro’s redesigned ExoWrap system draws the foot up into the shoe, using its unique wrap-around design and new micro-adjust Li2 Boa® reels. The result is a 360-degree foot closure that gives you an ultra-comfortable and personalized fit. COOL COMFORT A new polyurethane coated mesh upper with laser cut micro-perforations delivers maximum ventilation combined with long-lasting durability. The seams are welded rather than sewn, which helps minimize weight and gives these road shoes a sleek profile with a supple feel. - All-new ExoBeam outsole features a dual-beam design made with ultralight 100% carbon fiber lay-up construction for superior toe-heel stiffness - An all-new 360º wrap-around upper with high frequency welded seams and laser cut micro-perforations for optimal ventilation and a balanced foot climate - All-new internal ExoWrap structure for an ultra-comfortable, 360-degree foot enclosure and a customizable fit - All-new exclusive performance last offers all-day comfort and increased fit options - All new micro-adjust Li2 Boa reels give a super secure and comfortable fit, Ultra grippy SharkSkin heel liner gives a secure, slip-free fit even under the harshest conditions - Removable sock liner with tunable arch support and TransTextura Plus antimicrobial layer promotes a balanced foot climate

The new Macha Pro helps you get the most out of every pedal stroke whether you’re out on a training ride or in a mid-race sprint. Anchored by the power of technology, the Macha Pro puts the Motion Efficiency System to work for you. These performance-level racing shoes are lightweight and efficient, and the stylish design comes in two colorways. FEATURES - 100% long-fiber carbon ExoBeam plate with all-new dual beam design, offers secure mid-foot contact for better power transmission - ExoBeam technology reduces strain on the knee and ankle joints - All-new 360º ultra-lightweight, wrap-around upper with high frequency welded seams offers optimal support - All-new internal, direct pull ExoWrap structure design with all-new dedicated Boa Li2 dial produces a 360° foot enclosure for customizable arch fit and support - Laser cut micro-perforations in the upper for improved ventilation, cycling-specific performance last enhances overall performance - SharkSkin heel lining, removable sockliner with tunable arch support and TransTextura Plus layer

Upper: - Microfiber techpro matt Sole: - MTB SRS carbon-ground sole Technology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Rubber toe

A brand-new road bike shoe in the Sidi lineup, the Shot-2 is light, aerodynamic, breathable, and well-performing. The upper is Microfiber TechPro and mesh. The Microfiber TechPro is eco-friendly with antibacterial and hydro treatment. Hydro treatment reduces water absorption. While the mesh provides great breathability and creates the ideal microclimate inside the shoe. A Comfort Fit Insole is provided for lightweight support. The new "C-Boost SRS" sole is born from the union of C, which indicates the chemical element Carbon, BOOST translation of push/support/support, and SRS Sole Replacement System. The C-Boost SRS sole provides excellent performance in the pushing phase. The special conformation of the metatarsal area allows greater power transmission on the pedals and guarantees ideal support. New oval holes, with an extra ± 5mm adjustment, considerably expand the positioning possibilities of the cleat which can be memorized by means of the usual millimeter scale applied. The carbon parts most subject to deterioration are protected by special SRS (Sole Replacement System) inserts in nylon and Thermoplastic Polyurethane (TPU) equipped with steel screws whose task is to reduce deterioration and at the same time extend the life of the resistance to abrasion while walking. The inserts are also integrated with ventilation holes that promote breathability inside the sole. The new "Double Tecno-3 Push Flex" rotor, entirely made by Sidi's R&D department (research and development center) together with the precious collaboration with sponsored athletes, completely eliminates the pressure zone on the instep and significantly improves the closure feeling. This system requires a smaller support surface on the tongue of the shoe and is equipped with a central flexing system capable of adapting to the different needs and conformations of the cyclist's feet, without creating areas of overpressure. Like its predecessors, it guarantees micrometric regulation, closing speed/tension release, and is replaceable. The all-new integrated heel is light and reinforced to avoid deformation after prolonged efforts and pressure. Thanks to its anatomically shaped structure, it stabilizes and supports the foot while pedaling, while the Reflex inserts offer greater safety on the road, with poor visibility conditions. As in the previous model, the Adjustable Heel Retention Device reinforces the spoiler, significantly improving the fit. Enjoy great traditional Sidi quality and construction.

Upper: - Microfiber techpro matt Sole: - Vent carbon sole Technology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Replaceable heel pad

Upper: - Microfibre techpro Sole: - Vent carbon sole Tecnology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Replaceable heel pad Last: - Women’s specific

The CX242 is a culmination of all of our experience, advanced materials, and shoe making techniques to make a shoe that offers the best fitting solution for hard to fit foot types. Made with a heat moldable heel counter and an uniquely designed upper that has enough adjustability to accommodate feet with any instep height or foot volume without sacrificing comfort. The CX242 was designed for those riders with foot issues such as bunions, deformation or extremely narrow feet who need a shoe that will not beat their feet up, giving the rider the endurance they need to stay on the bike. The upper has separated panels that allow for fine tuning the pressure and fit which also allows the upper to conform around sensitive and painful spots on the foot without the same level of constraint that is felt in traditional shoe uppers. CX/TX Competition Last – With a profile specifically designed for very high-cadence riding & higher pressure, our Competition last features a more curved profile than the Sport last. The main differences include increased toe pitch & heel lift, a tighter heel & a slightly wider ball girth to allow the foot to expand under high pedaling pressures. Lake Competition 100% Carbon Fiber Sole. Available in 3 hole cleat pattern. A 100% carbon fiber sole that creates a comfortable, lightweight and classy package. Fullgrain leather (White/Black and Black/Silver) or Clarino Microfiber (Matte Grey/Black and Reflective Silver/Grey) and NuFoam lining with Carbon fiber support panels, which help to maintain a secure fit while adding foot stability. The upper is segmented into 6 independent zones for the most flexible fit to accommodate narrow or wide feet as well as high instep and low instep feet. The moldable heel counter doubles the heel hold for a secure fit. Carbitex support panels offer additional support to enhance the closure. Dual Side mounted Push/Pull Li2 BOA Fit System with releasable lace guides.

Power up steep climbs. Maximize your watts in the final sprint. Go longer distances with more comfort and less strain. The Surge Pro combines a new 100% thermoset carbon ExoBeam outsole combined with the BOA System closure featuring BOA Powerzone for direct pull ExoWrap support to provide a seamless connection to your bike. Promote your experience with the exact same direct power and efficiency as Giant’s pro riders. - Unique Slip-Last Construction allows the forefoot to be stiff while enabling torsional rotation of the rear and mid foot. - Unique on-the-fly micro-adjustment BOA System closure featuring BOA Powerzone with direct pull ExoWrap to support to every foot and arch type - New 100% thermoset carbon ExoBeam plate produces the lightest, stiffest plate that exceeds industry standards - Weight: 240g (size 43)

Power up. Imagine yourself confidently breaking away from the pack—during a climb. On your feet? The Macha Pro, our highest-level shoe built to help make your dreams a reality. Like you, the Macha Pro gets to work. It converts every pedal stroke into speed, while allowing you to maintain focus on the road ahead. - Injection molded TPU elements in both heel and toe help protect the carbon ExoBeam plate from wear while off the bike - 100% Motion Efficiency System carbon fiber outsole—keeps the forefoot stiff while enabling torsional movement of the rear and mid foot - Built from a woman-specific fit last with a smaller forefoot and heel volume - Highest quality upper material offers excellent support, comfort and ventilation at extremely low weight - Replaceable heel stud - On-the-fly micro-adjustment Boa closure system integrated with ExoWrap technology offers unsurpassed fit and support - Sharkskin textured material keeps heels from slipping - Breathable TransTexturaPlus sockliner lets heat escape, keeps feet feeling fresh, and provides adjustable arch support - Microfiber collar lining - SPD SL Cleat compatibility - Weight: 220g (size EU 39)

This latest version of the Infinito R1 cycling shoe features a knitted construction that offers outstanding ventilation and is ultralightweight while maintaining all the fizik performance technologies. A performance road racing cycling shoe engineered with a new, advanced knitted upper for enhanced breathability. - Knit: knitted upper - Li2 Dual Zone BOA Fit System configuration - R2 carbon outsole: full carbon unidirectional, stiffness index 10 - Weight: 225g (size 42 - 1/2 pair) - Sizes: 36-48 (37 to 47 also in half sizes) - Vento: performance racing series designed in collaboration with professional cyclists - Intended use: road racing

Lighter. Stronger. Faster. Designed for speed and comfort, the Vaypor S once again redefines the standards of pro level road cycling shoes. Bont's latest flagship shoe has been further refined to improve on their already industry leading standards. Whether you are a pro racer or simply a rider who demands the finest, the Vaypor S will provide the most anatomically and biomechanically correct platform with the most efficient power transfer platform currently available. - 100% carbon monocoque chassis utilizing hand-laid unidirectional carbon and Bont's proprietary heat molding technology - Duralite upper & suede leather liner - 3.6mm stack height - Frontal area air vents - Innersole: EVA thermo-moldable - Sole Guards: replaceable heel guard - Padding: memory foam - Fully heat-moldable monocoque chassis - Cleat mounting: 3-hole Look configuration plus mm grid plus grip - Closure System: Dual Dial System with replaceable Kevlar Wiring - Weight: 230 grams (approximate weight based on size 42 shoe)

SOFT INSTEP CLOSURE SYSTEM The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable. TECNO-3 PUSH SYSTEM TECNO-3 PUSH SYSTEM dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. SIDI's famously reliable and replaceable closures are improved by an all new proprietary SIDI Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. TECNO-3 PUSH can be adjusted while riding, thanks to an innovative button which can be pushed to lift the buckle and facilitate the adjustment. SINGLE TECNO-3 PUSH The central mechanism, creates a perfect tension balance between the shoe's internal and external side. The symmetrical mechanism guarantees an excellent closure adapting on every instep. An innovative button added to the monofilament buckle, if pushed, lifts the buckle to facilitate the adjustment. SIDI HEEL CUP Reinforced cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer. Provides additional foot protection in the event of a crash. RUBBER TOE Upper part of the toe section is rubberized to resist and deflect impacts from stones or debris when cycling. It is made with anti-slip rubber. MTB SRS CARBON-GROUND SOLE The MTB SRS CARBON-GROUND SOLE raises the standard for mountain bike performance, dropping off about 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability. The MTB SRS CARBON-GROUND Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole, plus the innovative Replaceable MTB Plate, designed to prevent sole damage from pedal contact MTB SRS CARBON-GROUND SOLE Most Dual-Retention Bar type MTB Pedals (such as Crankbrothers and LOOK) recommend using a reinforcement plate between the cleat and the shoe in order to prevent cracking or denting the sole. The MTB Plate can be replaced in case of damage from the pedal system, so adding the weight of an aftermarket reinforcement plate is optional. The Ground SRS treads and MTB Plate are easily removable and replaceable. The MTB SRS CARBON-GROUND Sole is toe-spike compatible.

A pro-level cycling shoe with a Microtex upper, full unidirectional carbon outsole (R2) and Li2 Dual Zone Boa® Fit System configuration. The latest refinement of our legendary performance road racing cycling shoe, developed with and chosen by leading athletes throughout the pro peloton. - Microtex upper - Li2 Dual Zone BOA Fit System configuration - R2 carbon outsole: full carbon unidirectional, stiffness index 10 - Weight: 227g (size 42 - 1/2 pair) - Sizes: 36-48 (37 to 47 also in half sizes) - Vento: performance racing series designed in collaboration with professional cyclists - Intended use: road racing

The Garneau Klondike M3 Cycling Boot offers ultimate protection and keeps feet warm on long winter rides. - High volume fit last - Cordura 1680D with 400 g ThinsulateTM to resist cold temperatures down to -20°C/-4°F - Boa® IP1 with silicone elastic and neoprene opening with YKK zip - VIBRAM® DURATREK outsole - 3-layer construction insole with felt, 3 mm PE and foil

Feast your eyes on the all new Garneau Tri Air Lite Shoes. LG took their best-selling Tri-400 shoe and gave it all the upgrades you could ever imagine. Some would even call it space grade, and we guarantee it’ll get you from T1 to T2 cooler, faster, stronger, and way more comfortable than anything you’ve ever seen. Technical Details: - Shoe Technology : Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 8.3 oz/235 g - What's Included: Shoe bag included - Outsole: Patented Carbon Air Lite composite extremely ventilated outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Closure System: Boa L6 micro-adjustment, Hook and loop straps: Easy to adjust

Upper: - Vented microfibre techpro Sole: - Vent carbon sole Tecnology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Replaceable heel pad

Upper: - Vented microfibre techpro Sole: - Vent carbon sole Tecnology: - Soft instep closure system 4 - Single tecno-3 push system - Tecno-3 push system - Adjustable heel retention device - Sidi heel cup - Replaceable heel pad

No matter if your feet are thin, medium or wide, Garneau's X-Comfort zone technology prevents numbness by extending the shoe's edges if needed. Having an internal lace system and a tight opening on the shoe's top avoids mud from sticking into the Baryum's fastening system. Get the best of both worlds with a stiff carbon outsole covered in rubber for optimal grip in any conditions. Heels and toes are protected with extra reinforcements so that you can head to the craziest trail sections with confidence. Technical Details - Shoe Technology: Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 12.7oz / 360g (size 42) - Outsole: Carbon and rubber outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Heel Retention: HRS-100 reinforced with 0.6mm membrane: Better heel positioning and reduced loss of power - Closure System: Boa L6 micro-adjustment

The Lake MX238 Gravel Shoe offers gravel and mixed-terrain riders the comfort and performance of a road shoe with the walkability of a mountain bike shoe without the addition of excessive weight or bulk. MX Competition Last – Featuring a larger toe box & tighter heel than the Comfort last and slightly more overall volume than the Sport last. Exceptionally secure for hard riding/racing with enough room in the toe box to prevent binding when running up inclines or negotiating a hike-a-bike section. Designed for performance riding & racing. - Lake Competition 100% Carbon Fiber Sole with Mountain Race X real rubber sole. - Clarino Microfiber (Beetle/Black and White/Black) or Ecco Fullgrain Suede Leather (Black/Gold), Mesh and Helcor abrasion, and water-resistant leather panels with a hook lycra heel lining. - Dual Side mounted Push/Pull BOA IP1-S lacing system with releasable lace guides.

The Lake MX238 Gravel Shoe offers gravel and mixed-terrain riders the comfort and performance of a road shoe with the walkability of a mountain bike shoe without the addition of excessive weight or bulk. MX Competition Last – Featuring a larger toe box & tighter heel than the Comfort last, and slightly more overall volume than the Sport last. Exceptionally secure for hard riding/racing with enough room in the toe box to prevent binding when running up inclines or negotiating a hike-a-bike section. Designed for performance riding & racing. Outsole: Lake Competition 100% Carbon Fiber Sole with Mountain Race X real rubber sole. Upper: Clarino Microfiber (Beetle/Black and White/Black) or Ecco Fullgrain Suede Leather (Black/Gold), Mesh and Helcor abrasion, and water-resistant leather panels with a hook lycra heel lining. Closure: Dual Side mounted Push/Pull BOA IP1-S lacing system with releasable lace guides.

- Model: Vaypor XC - Material: Carbon Composite chassis with Durolite Upper & Faux Seude Leather Liner - Stack Height: 4.4 mm - Air Vents: Frontal area air vents - Innersole: EVA thermo-moldable - Sole Guards: Replaceable - Padding: Memory Foam - Cleat Mounting: MM grid plus grip / SPD compatible - Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin - Closing Options: Z form Velcro Straps + Boa dial (replaceable) - Weight: 385 grams - Color Options: Black only

Evolving from the CX237, Lake has improved upon performance and durability, with its high-cadence riding favorite, the Lake CX238 Road Shoe. Shaped for a better, more comfortable fit, the Competition last increases toe pitch and heel lift, allowing the foot to expand under high pedaling pressure. Supporting the shoe is Lake's Race carbon fiber sole, offering impressive stiffness and power transfer while remaining low in weight. To protect the shoe from premature wear, the full-grain leather upper boasts a panel at the heel and a rubber bumper at the toe, plus mesh panels for proper ventilation. Designed for high-pressure riding, the Lake CX238's wider forefoot provides the relief you need to focus on the road ahead. CX/TX Competition Last – With a profile specifically designed for very high-cadence riding & higher pressure, our Competition last features a more curved profile than the Sport last. The main differences include increased toe pitch & heel lift, a tighter heel & a slightly wider ball girth to allow the foot to expand under high pedaling pressures. Lake Competition 100% Carbon Fiber Sole. Available in 3-hole cleat pattern. Fullgrain Water Resistant Premium Leather or Clarino Microfiber and mesh with hook Lycra & Outlast heel lining. Helcor heel panel and rubber toe bumper helps protect the upper from scuffs and scratches. Outlast temperature regulating heel and tongue lining offers a luxurious foot feel, while maintaining a breathable, durable & firm grip to your foot. Dual Side mounted Push/Pull IP1-S BOA lacing system with releasable lace guides

Evolving from the CX237, Lake has improved upon performance and durability, with its high-cadence riding favorite, the Lake CX238 Road Shoe. Shaped for a better, more comfortable fit, the Competition last increases toe pitch and heel lift, allowing the foot to expand under high pedaling pressure. Supporting the shoe is Lake's Race carbon fiber sole, offering impressive stiffness and power transfer while remaining low in weight. To protect the shoe from premature wear, the full-grain leather upper boasts a panel at the heel and a rubber bumper at the toe, plus mesh panels for proper ventilation. Designed for high-pressure riding, the Lake CX238's wider forefoot provides the relief you need to focus on the road ahead. CX/TX Competition Last – With a profile specifically designed for very high-cadence riding & higher pressure, our Competition last features a more curved profile than the Sport last. The main differences include increased toe pitch & heel lift, a tighter heel & a slightly wider ball girth to allow the foot to expand under high pedaling pressures. Lake Competition 100% Carbon Fiber Sole. Available in 3-hole cleat pattern. Fullgrain Water Resistant Premium Leather or Clarino Microfiber and mesh with hook Lycra & Outlast heel lining. Helcor heel panel and rubber toe bumper helps protect the upper from scuffs and scratches. Outlast temperature regulating heel and tongue lining offers a luxurious foot feel, while maintaining a breathable, durable & firm grip to your foot. Dual Side mounted Push/Pull IP1-S BOA lacing system with releasable lace guides

The Lake MX238 MTB Shoe takes the 237 a step further for hardcore Adventure racers and rugged mountain bikers with more protection while keeping the legendary fit, especially for the rider with wide feet. Aramid protection and Helcor abrasion-resistant leather panels are specifically designed to be extremely durable against rubbing, scrapes, and scuffing. Keeping your foot in place during big efforts, the Hook Lycra heel lining offers extra grip on your cycling sock. Ecco full grain leather (Black/Black) or Clarino Microfiber (Strong Blue/Black) with mesh helps make this Lake's most comfortable shoe yet. The upper is sleek, supple, and form-fitting giving you a glove-like feel that over time makes a perfect match to your foot like nothing else. MX Competition Last – Featuring a larger toe box & tighter heel than the Comfort last and slightly more overall volume than the Sport last. Exceptionally secure for hard riding/racing with enough room in the toe box to prevent binding when running up inclines or negotiating a hike-a-bike section. Designed for performance riding & racing. Outsole: Lake Competition 100% Carbon Fiber Sole with Mountain Race X real rubber sole. Upper: Full grain Water Resistant Premium Leather (Black/Black) or Clarino Microfiber (Strong Blue/Black) with mesh upper, Aramid and Helcor Abrasion resistant leather panels with Outlast and hook Lycra heel lining. The Helcor abrasion-resistant leather is specifically designed to be extremely durable against rubbing, scrapes, and scuffing. Hook Lycra heel liner offers a firm grip to your foot for those walking sections. Closure: Dual Side mounted Push/Pull BOA IP1-S lacing system with releasable lace guides.

TX AIR - Features an enlarged toe mesh window for added airflow. CX/TX Competition Last – With a profile specifically designed for very high-cadence riding & higher pressure, our Competition last features a more curved profile than the Sport last. The main differences include increased toe pitch & heel lift, a tighter heel & a slightly wider ball girth to allow the foot to expand under high pedaling pressures. Outsole: Lake Competition 100% Carbon Fiber Sole. Available in 3 hole cleat pattern. Upper: Durable Microfiber upper with NuFOAM™ & Trek-Dry breathable, moisture-wicking & antimicrobial lining. Our unique lining works in a way that keeps your feet feeling cool and dry. Heat moldable carbon heel counter. Closure: 40mm hook & loop strap with fast transition forefoot L6 BOA closure.

Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wolvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wolvhammer has you covered. - Removable synthetic liner boot for quick drying - 3-piece proprietary bottom assembly is lighter, warmer, and offers more walking traction - Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth - Real rubber outsole with microglass lugs. Comes with removable cleat plate for flat pedal use - Single-zone BOA closure with a gusseted tongue to keep winter elements out and warmth in - Suggested temperature range: 0° F (-18° C) to 25° F (-3° C)

Microtech Microfiber incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the "Water-Tech” water treatment: - Lower environmental impact - Less noxious emissions into the air and into the work environment - Water-based products, not solvents, were used, which is beneficial to the environment as well as the final user. The Soft Instep 4 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - The MTB RS17 SOLE consists of a Nylon and PU blend. This sole is lighter than the traditional competition sole and has been updated with a more aggressive tread pattern and a replaceable toe tread insert. - Regular "D" width last for precise fit.

Microtech Microfiber incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the "Water-Tech” water treatment: - Lower environmental impact - Less noxious emissions into the air and into the work environment - Water-based products, not solvents, were used, which is beneficial to the environment as well as the final user. The Soft Instep 4 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - The MTB RS17 SOLE consists of a Nylon and PU blend. This sole is lighter than the traditional competition sole and has been updated with a more aggressive tread pattern and a replaceable toe tread insert. - Regular "D" width last for precise fit.

Upper: Microfibre microtech Sole: Carbon composite 20 sole Technology: - Soft instep 4 - Tecno 3 system - Sidi heel cup - Replaceable heel pad

Wide road shoes Upper: Microfibre microtech Sole: Carbon composite 20 sole Technology: - Soft instep 4 - Tecno 3 system - Sidi heel cup - Replaceable heel pad

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

Tough enough to withstand even the wettest, coldest rides, the MW702 is engineered to keep you mountain biking comfortably through the winter months. Sporting a fleece insole liner, a waterproof and breathable GORE-TEX layer, and durable ULTREAD XC grip, this shoe is built for those that don't slow down when the temperature drops. Features: - Winter Mountain Bike Shoe: the MW702 is a versatile wet weather racing shoe - Waterproof Shoe: insulated GORE-TEX layer keeps the warmth in and the elements out - High Cut Design: tall cuff construction around the ankles gives added protection - ULTREAD XC Outsole: rugged rubber outsole offers supreme grip in slippery conditions off the bike - Adjustable Fit: L6 BOA® dial closure system cinches in seconds for a secure fit every ride EXCEPTIONAL TRACTION When the going gets tough, confidently keep your footing. ULTREAD sole technology, a new proprietary rubber compound and sole pattern, delivers enhanced durability and traction while walking or pushing your bike over slick terrain. PROTECTION AGAINST THE ELEMENTS The MW702's waterproof GORE-TEX® comfort liner insulates against the cold and wet, with an insole fleece liner for extra heat retention. A wraparound lace shield design provides additional weather-proofing, with a tall ankle cuff to keep moisture and cold breezes out.

Bringing together the top performance features of Shimano's premium mountain bike and road racing footwear in a shoe that balances powerful pedaling performance and versatile off-the-bike capability, the RX801 Rally is a featherweight rally edition gravel shoe that’s as bold as its rider. Lightweight and walkable, it’s the perfect shoe for gravel racers, gran fondo riders, and weekend warriors alike. Get dirty. Get dusty. Features: Ultralight Gravel Shoe: the RX801R is a rally edition, 3+ season SPD-compatible gravel racing shoe for adventures in all types of terrain Extra Protection: knitted ankle cuff offers added protection from rogue sand, rocks, and water Precise Fit: new low profileBOA®Li2 dial adjusts for a secure fit instantly with no pressure points Tread Confidently: high-grip, scratch-resistant rubber outsole makes walking a breeze Carbon Composite Sole: stiff, lightweight sole optimized for increased power transfer through your pedal stroke Cleats sold separately

KEY FEATURES: - Racing shoe - Ultra lightweight - Stiffness index 10 - HMX carbon sole - Dual BOA® Fit System If you're looking for one package that offers maximum stiffness and minimal weight, the SCOTT MTB RC Evo is your shoe of choice. Primed for pure efficiency, it features an ultra-comfortable TPU airmesh laminate upper. The dual-zone BOA Li2 Fit System allows on-the-fly adjustability at the ankle and at the forefoot. For optimal sole support, the ErgoLogic insole features adjustable arch support and a metatarsal button.

If you're looking for one package that offers maximum stiffness and minimal weight at once, the SCOTT MTB RC EVO is your shoe of choice. Primed for pure efficiency, it features a seamless, ultra-comfortable TPU airmesh laminate upper. The dual-zone Boa Fit System IP-1 allows on-the-fly adjustability at the ankle and at the forefoot. For optimal sole support, the ErgoLogic insole features an adjustable arch support and metatarsal button. The stiff HMX Carbon fiber sole has a stiffness index of 10 (our stiffest, for pure efficiency).