Cleats/Accessories/Parts

- Wind-resistant fabric - Microfleece lining - Water-resistant - Reflective logo

Composite wear plate protects cleat mounting area on Drako Carbon SRS soles.

Tecno 4 Push Tensioner system for Sidi Sixy shoes.

Shims to solve leg length difference and misalignment. Plates have a thickness of 3mm.

Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools

Flat Pedal Friendly Mud Protection - Super tough, nylon faced neoprene upper with highly durable overlays - Novel, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section tread for added grip - Rear Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Reflective trim - Clean shoes, clean lines, muddy trails - Tight fit = clean shoes - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying

Replacement tread blocks for 2013 and newer full carbon Drako/Tiger.

For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.

Our Cleat Covers for Look KéO® cleats have the maximum walking surface area possible. They also have innovative horizontal reinforcements, making the covers strong and stable. Easy to sneak into your jersey pocket, these cleat covers are as good as it gets. (fits all 3 KéO® cleats: Red, Gray, and Black)

This was the first cleat cover we designed. From the very beginning, we had the rider’s needs in mind. We made our cover lighter, smaller, and easier to use than any other on the market. Try our Cleat Covers for Look Delta®, and you’ll experience the difference in your first step. (for non-Teflon cleats only)

Campagnolo Pro Fit Cleats& Hooks Cleat does NOT include the hooks or the hardware - Cleat Bolt Pattern: 3-Bolt - Color: Black - Float (deg): 0 - Cleat Compatibility: Campagnolo Pro Fit

- ProTextura PLUS Wind and water proof material with critical seams taped - ThermTextura functionality due to the properties of neoprene - Medial locking side zipper with Velcro closure - Wear-proof bottom piece - Reflective details for additional visibility

Your S-Works Road shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works Road shoes. - Fits 2013 and 2014 S-Works Road shoes - Heel lug only - Sold in pairs; includes screws

58% Merino Wool, 35% Nylon, 7% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, the Slipstream Strada features pre-opened cleat zones and heel tabs. Features an embossed DeFeet logo infused with glass beads for nighttime reflectivity. Available in charcoal grey.

Standard Insoles from Sidi.

Durable construction combines with insulating wind and water-resistant fabric that protects feet from the coldest conditions. - Softshell fabric provides optimal wind protection and water resistance - Two stage hook and loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - Kevlar road bottom spreads open for easy on and off while providing superior durability - For road shoes with external cleats - BioViz reflective elements for low-light visibility

Make sure your gear is working for you during your next aero event. Giant's Aero Shoe Covers help smooth airflow over your feet and reduce drag. Stretchy Lycra covers with sublimated graphics and a back zipper closure make it easy to get these covers over your shoes.

Caliper Buckle Strap from Sidi.

Reinforced bottom and toe area for extra durability Made of wind and waterproof latex to keep your feet warm and dry Lightweight and flexible, no need for zippers or Velcro that cause leaking Smooth form fitting design aids in aerodynamic efficiency Easily fits into jersey pocket or saddle bag

Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws

Made with durable Softshell fabric for wind and water resistance, this cover is designed for mountain bike shoes and offers warmth and protection in cool, wet weather. An innovative power band that secures the front under your toes and a new, easy-to-use hook-and-loop closure offer durable, comfortable performance to keep your feet warm and dry. - Two stage hook and loop closure provides both sleek fit and easy on and off - Innovative power band secures front of shoe cover under toes - Softshell fabric provides optimal wind protection and water resistance - Anatomic paneling for a performance fit - Kevlar mountain bike bottom spreads open for easy on and off while providing superior durability - Recommended for mountain bike shoes - For X–Alp compatibility, use shoe cover that is equivalent to your X–Alp shoe plus one shoe size - Reflective elements for low–light visibility

Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.

- Designed to keep feet warm and dry during cold wet rides - Patented design uses no zippers and fastens with reinforced straps under your shoe - Included waterproof cuff ensures rain doesn't enter from the top of the shoe cover - Kevlar toe and reinforced

Tecno 3 Push Tensioner Original part replacement tensioner for Genius 10, Alba 2, Alba, Dominator 10, Trace 2, Trace.

•Can only be used with Caliper Straps •Includes 2 fitting screws and one pair of buckles •To open lift both buckles, To loosen lift the central clip