Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Stems

$549.99
The Syncros Creston iC is the ultimate in terms of integration on the road. Clean and uncluttered our new Syncros combo cockpit allows us to route all the cables completely internally through the bar, headset and into the frame as part of SCOTT’s new ICC routing. - Carbon UD, Superlight Layup - Compact Bend 75mm/125mm Reach/Drop - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/4" for Scott Addict RC MY20 - Weight: 280g
$520.00
Replacement stem for the 2018+ Giant Propel - -8 Degree rise - Composite stem and cover Includes: - Stem - Cover - Top Cap - Hardware - Di2 plugs
$400.00
Steerer diameter: 1-1/8" Bar diameter: 35.0mm Rise: 0 deg Length: 32mm Color: Raw Ti - VRTS - Variable Radius Geometry - 2-bolt stem installs onto any rise bar without shims, scratches, or effort! Yes, it's easier to install vs a 4 bolt stem - Designed and machined in San Diego, CA - Weight: 133g with hardware
$399.00
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
$369.99
Get back on the road with a genuine replacement stem. Original equipment replacement stem for your Madone SLR. PRODUCT DETAILS - High fit stem is 7-degrees of drop - Not compatible with other bikes - For installation instructions, please see your Madone Assembly Manual
$350.00
The IN-Route High Rise Stem was designed to achieve a rider’s ideal position without the need of excessive spacers. This stem can provide 43.5 – 49mm of stack and does so by increasing the stack height of the stem’s steerer clamp and a positive stem angle.
$299.99 - $350.00
Often an overlooked part, but important in its function and integration of drivetrain components, the SES Aero Stem features a refined shape and carbon laminate that bridges the gap between the touch points of the handlebar and the bike. Fully integrating and concealing all cabling from the shifters to the frame, the SES Aero Stem is the final piece of the puzzle to a cleaner looking bike and clean airflow for real world aero performance.
$349.99
- Compatible with Giant's proprietary Overdrive Aero steerer tube - Ultra-light carbon composite reduces weight while optimizing the aerodynamic shape - Integrated aero shape achieves maximum stiffness while attaining low weight - Simplified cable management hides all the cables underneath the stem - Weight (g)133/138/143/148/153/158/163/168 - Length (mm)80/90/100/110/120/130/140 - Angle±10° - Bar Clamp Dia. (mm)31.8 - Stack Height (mm)40
$349.99 $499.99 30% Off
Our one-piece cross country handlebar/stem combo is the ultimate in lightweight for the discerning XC rider. Based on our popular T-bar flat handlebar and a -8° stem in 3 different virtual extension options our carbon engineers have been able to make a considerable weight saving with the same performance. - XC World Cup level carbon bar - One piece construction. - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem -8° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm
$320.00
ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°). FEATURES - Compatible with all Giant OD1 and OD2 head tubes sizes - Available in ±10° and ±20° angles - Available in eight lengths from 70 to 140mm - Purpose-engineered shaping achieves maximum stiffness and lowest weight - Integrated aero silhouette from stem cap to spacers
$320.00
ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).
$300.00
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm
$300.00
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping. - Material: Carbon Fiber - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 41mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Steer Tube: 5.5Nm - Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
$300.00
Only compatible with ENVE Melee/MOG bikes (due to front internal routing) ENVE In-Route compatible stem. Material: Carbon Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm Rise: -7° Stack: 40mm Claimed Weight: (120mm) 140g
$300.00
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Bar Clamp Diameter (mm): 31.8 mm - Material: Carbon - S.H.I.S. Stem Clamp Diameter: 28.6 - Stem angle: 0-degree
$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff - Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue - Titanium hardware and lightweight aluminum faceplate - 107g
$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff - Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue - Titanium hardware and lightweight aluminum faceplate - 107g
$299.00 $399.99 25% Off
The bar of choice of Nino Schurter and Lars Forster of the SCOTT-SRAM team, the Fraser features our integrated bar and stem concept, now also allowing for the integration of cables on the front of the bike. Extensive testing allowed us to pinpoint ideal reach, drop, and sweep for Nino and Lars, allowing them to get a super-low and fast position matched perfectly to what they need to race at the highest level at the World Cup. This -40 degreee stem angle might not be for everyone but works for them. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
$242.25 - $285.00 $285.00 Up to 15% Off
Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately
$280.00
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 35mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (35mm), 92g (50mm), 99g (65mm)
$239.00 - $256.50 $285.00 Up to 16% Off
The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM's Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that's designed to be aerodynamically efficient by blending into the stem body. Available in six sizes, ranging from 90 to 140mm, to meet any rider's fit needs. - Updated distinctive Zipp cosmetics - Carbon Exogram construction delivers the stiffest stem on the market gram for gram. - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated computer mount available separately
$249.99
The new ShockStop PRO Stem blends seamlessly with the aesthetic of modern bikes, while reducing fatigue and strain. Along with the ShockStop Suspension Seatpost, this system works together to suspend the rider and smooth out rough terrain on the bike you already own, making your ride smoother, faster, and more comfortable. Benefits: - Go further—reduce fatigue from bumps and vibrations - Ride faster—energy that is normally wasted suspending your body is converted into forward motion - Take control—customize your suspension feel to float over obstacles and maintain control over rough terrain - GPS and Utility Mounts sold separately Details: - Titanium Hardware - 15% Reduction in Weight over standard ShockStop - Refined premium finish - The ShockStop Stem in available in +/-6 degree angle with 80mm, 90mm, 100mm, 110mm, and 120mm lengths - Effective suspension travel: up to 20mm - Includes 5 swappable elastomers to fine tune your riding style - Check technical specs for compatibility What's in the Box: - 1 x ShockStop PRO Stem - 5 x swappable elastomers (2 pre-installed, 3 additional in box) - All required hardware
$249.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
$233.59
- Full UD carbon construction stem - 4 bolt aluminum faceplate for added rigidity - Stainless steel hardware - Reversible +/-7° angle - 40mm stack height - 125g weight in 100mm length - ISO-Road safety certified
$229.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm
$229.99
eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm
$220.00
Full Speed Ahead Team Stem - 40mm 35mm Clamp +/-6 1 1/8" Oil Slick. The FSA Team Stem is a one-off design developed specifically for FSA’s Enduro team riders. Minimalist design was optimized using FEA and validated on the toughest trails. Short lengths to take advantage of modern long reach top-tubes and slack head-tubes frames. - 100% CNC machined - 35mm fork clamp stack height - Oil slick surface - 123 grams (L35mm) 157 grams (L50mm) - CNC Faceplate - No Gap design - Chromoly hardware - 6° rise L32 40 50mm - 35mm handlebar clamp diameter - Bar Clamp Diameter (mm): 35 Color: Oil Slick Defined Color: Multi-Color Length: 40/50 Material: Alloy S.H.I.S. Stem Clamp Diameter: 28.6 Stem Angle (deg): +/-6
$189.99
FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon. - Stack Height: 41mm - Weight: 126g (100mm)
$169.99 - $189.99
An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations. - Unwanted vertical movement is absorbed by twin interchangeable elastomers - Stem retains torsional rigidity - Travel is limited to 1-2 centimeters - Made with 6061-T6 Aluminum - Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style
$184.99
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect. Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem. We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?". From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance. Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours. Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender. - Forged and Fully CNC machined from AL6061 – T6 Aluminium - Stainless Steel Hardware - Available lengths - 35mm, 42.5mm and 50mm - Available in both 31.8mm (Black only) and 35mm Clamp - Weight: 35mm 138g, 42.5mm 152g, 50mm 160g
Page 1 of 8 Next page