Pedals

Designed for cyclists with exacting standards, X-Track Dual Power pedals are the perfect option to get the most out of each training session and race, whether you're riding an MTB or gravel bike. With a power meter inside each axle, they provide accurate data in all conditions, including the most extreme, and feature a market-leading weight/contact area ratio. Approved by experienced athletes, they are hard-wearing, reliable, efficient and Made in France: the perfect pedals on any terrain. - Dual power transducers for accurate, comprehensive data - An accurate power meter in a pair of efficient SPD compatible pedals - Aluminum body, Stainless Steel platform and steel bearings - Lightweight (404 g) with all-terrain efficiency - Installed and set up in minutes - Totally weatherproof and splashproof - Standard Cleat included with 6 - 14Nm retention - 3 year warranty

Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Assioma PRO MX is the revolutionary pedal-based power meter for MTB and gravel 100% SPD® compatible. You can use it with the cleats provided within the box or with the original Shimano® SM-SH51. It inherits the reliability and extreme precision of the Favero road power pedals, adding unparalleled resistance to shocks during your challenges on the trail. The Favero Assioma PRO MX-2 power meter pedals can be installed and swapped between bikes like any other pedal: in a few minutes and without special tools or the assistance of a mechanic. They feature both Bluetooth and ANT+ communication channels, which makes them compatible with the majority of bike computers and smart watches on the market, as well as with the major training apps such as Zwift, Strava, Bkool, TrainerRoad, Rouvy and many others. All the electronic components and the integrated rechargeable battery are safely stored within an extremely compact and resistant spindle. Those unpleasant inconveniences of battery-related dropouts typical of the replaceable batteries are thus avoided thanks to the strategic position of the rechargeable battery and the consequent absence of external electrical contacts. On top of that, without battery compartments or power ports that can be opened and closed, water, mud, and dust cannot enter, thus guaranteeing extreme reliability even in adverse weather conditions. The product is IP67-certified. The pedal body in aluminium 6061-T6 is extremely robust and light, ready for all types of terrain. The clipless system features a surface hardness of up to 800 HV, ensuring that the power meter pedal is as resistant to shocks as never seen before. Thanks to the special IAV Power System, Assioma's measurements take into account our irregular pedaling (e.g., sprints, climbs) or the use of oval chainrings when calculating power, guaranteeing an accuracy of ±1% in any situation. Assioma PRO MX-2 offers extremely comprehensive data reading via ANT+ and Bluetooth. The available data: Power Cadence L/R Balance PCO (Platform Center Offset) PP (Power Phase) TE (Torque Efficiency) PS (Pedal Smoothness) RP (Rider Position) The data provided by Assioma PRO MX-2 is based on measurements taken separately on the right and left sides. This allows you to accurately observe not only the total power, but also the left/right balance, which therefore translates into a real and non-estimated data reading. Assioma PRO MX-2 uses integrated rechargeable batteries: a single charge guarantees at least 60 hours of use. Charging takes place via a magnetic system, which avoids any problems related to accidental tugging of the charging cable. Favero Electronics produces each power meter in its headquarters in Italy and tests its good functioning individually through careful laboratory tests, fully satisfying the standards required by current regulations. Pedals for MTB and gravel with power meter on both sides Weight per power pedal: 191.4 g L/R Balance Cadence sensor: included, inbuilt Gyroscope: included, inbuilt Power calculation system: IAV (Instantaneous Angular Velocity-based) Cycling Dynamics: Available Data visible via ANT+ or on the Favero Assioma App: Power Cadence L/R Balance PCO Power Phase (PP) Pedal Smoothness (PS) Torque Efficiency (TE) Rider Position (no App Favero Assioma) Data visible via Bluetooth: Power Cadence L/R Balance Oval-chainrings compatible: yes Battery type: rechargeable, lithium-ion Battery life: at least 60 hours Radio communication: ANT+, Bluetooth Accuracy power measurement: ± 1% Thermal compensation: -10°C / +55°C Waterproofness rating: IP67 Stack height: 11,2 mm Compatible cleats: Provided cleats (art. 773-00-62) Shimano® SM-SH51 cleats Bike types: MTB XC, CX, gravel Made in Italy Warranty: 2 yrs

Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 326g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Designed for the compatibility with Shimano® road: Assioma DUO-Shi has been designed for Shimano® road users, as it offers the opportunity to keep on riding with your current Shimano® pedal bodies* without giving up on the trustability and precision of Assioma. Installation into your own Shimano® pedal bodies: Installing Assioma DUO-Shi into your own compatible Shimano® pedal bodies* is simple and quick. IAV Power and gyroscope: Unlike others, the measurement of Assioma is not affected by errors related to very irregular pedaling (e.g. uphill sprints) or the use of oval chainrings. This is because Assioma can detect the actual instantaneous angular velocity during the whole pedal stroke, thus providing ±1% accuracy in any conditions. Not only in the lab. Bluetooth and ANT+ Assioma communicates with bike computers and smartphones (both Android and iOS) via Bluetooth and ANT+. Assioma DUO-Shi measures power individually on both legs; this makes possible to observe with accuracy not only Total Power, but also L/R Balance, Torque Effectiveness (TE), Pedal Smoothness (PS), etc. Accuracy and consistency Assioma guarantees accurate and consistent data in all conditions on the road, and at any temperature ranging from -10°C and 60°C, thanks also to the ATC (Automatic Temperature Compensation). Waterproof and resistant The power sensors are protected by a bi-component resin block, extremely resistant to shocks and completely waterproof.

For gravel or mountain biking, the integrated power meter of the X-Track Single Power pedals allow you to optimize your effort, then to analyze your training and race data. Featuring an outstanding weight/contact area ratio, they are incredibly efficient on technical rides and designed to withstand the toughest conditions. A simple, reliable and accurate tool to measure your effort, combined with SPD-compatible pedals offering outstanding performance. - Single power transducer for accurate, comprehensive data - An accurate power meter in a pair of efficient SPD compatible pedals - Aluminum body, Stainless Steel platform and steel bearings - Lightweight (404 g) with all-terrain efficiency - Installed and set up in minutes - Totally weatherproof and splashproof - Standard Cleat included with 6 - 14Nm retention - 3 year warranty

The latest generation of Keo Blade clipless road pedals now adds a new dimension to your training thanks to a power meter. Perfectly integrated inside the left pedal axle, it measures and transmits your watts and cadence in real-time. Born from of expertise and experience at the highest level, they offer outstanding dynamic performance: ultra-lightweight (260g/pair), wide contact area and great aerodynamics. An essential, straightforward, reliable and easy-to-use tool to optimize your performance when training and racing. - Single power transducer for accurate, comprehensive data - Quick and easy installation in 30 seconds - The top-level performance of Keo Blade, with the added benefit of a power sensor - Best-in-class integration, ergonomics, durability and connectivity - Robust mechanical and electronic architecture - Carbon fiber blade body, Stainless Steel platform and steel bearings - Keo Grip cleats with 16Nm retention and 6 deg float - 3 year warranty

Upgrade your Rally pedals to a dual-sensing power meter, and analyze more than just watts to see exactly how your pedaling style generates the force that moves you. When paired, the upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics. - Revolutionary cycling dynamics display where you’re generating power throughout the pedal stroke and show left/right balance - See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency - Intended for Rally XC100

Assioma PRO MX is the revolutionary pedal-based power meter for MTB and gravel 100% SPD® compatible. You can use it with the cleats provided within the box or with the original Shimano® SM-SH51. It inherits the reliability and extreme precision of the Favero road power pedals, adding unparalleled resistance to shocks during your challenges on the trail. The Favero Assioma PRO MX-1 power meter pedals can be installed and swapped between bikes like any other pedal: in a few minutes and without special tools or the assistance of a mechanic. It features both Bluetooth and ANT+ communication channels, which makes it compatible with the majority of bike computers and smart watches on the market, as well as with the major training apps such as Zwift, Strava, Bkool, Trainerroad, Rouvy and many others. All the electronic components and the integrated rechargeable battery are safely stored within an extremely compact and resistant spindle. Those unpleasant inconveniences of battery-related dropouts typical of the replaceable batteries are thus avoided thanks to the strategic position of the rechargeable battery and the consequent absence of external electrical contacts. On top of that, without battery compartments or power ports that can be opened and closed, water, mud, and dust cannot enter, thus guaranteeing extreme reliability even in adverse weather conditions. The product is IP67-certified. Thanks to the special IAV Power System, the Assioma measurements take into account our irregular pedaling (e.g., sprints, climbs) or the use of oval chainrings when calculating power, guaranteeing an accuracy of ±1% in any situation. Assioma PRO MX offers extremely comprehensive data reading via ANT+ and Bluetooth. The available data: Power Cadence PCO (Platform Center Offset) PP (Power Phase) TE (Torque Efficiency) PS (Pedal Smoothness) RP (Rider Position) Assioma PRO MX-1 uses integrated rechargeable batteries: a single charge guarantees at least 60 hours of use. Charging takes place via a magnetic system, which avoids any problems related to accidental tugging of the charging cable. Favero Electronics produces each power meter in its headquarters in Italy and tests its good functioning individually through careful laboratory tests, fully satisfying the standards required by current regulations.

Useful for transforming your Assioma PRO MX-1 into Assioma PRO MX-2 whenever you want and in a few seconds: simply by pairing the new right pedal with your left pedal through the free Favero Assioma app. It includes a right pedal with a power meter, washers for installation, and the magnetic connector for recharging. Right pedal with power sensor 2 Washers 1 Magnetic charging connector 1 Guarantee and safety manual

Upgrade your Rally pedals to a dual-sensing power meter, and analyze more than just watts to see exactly how your pedaling style generates the force that moves you. When paired, the upgrade pedal completes the Rally power meter system, providing left/right balance data and cycling dynamics. - Revolutionary cycling dynamics display where you’re generating power throughout the pedal stroke and show left/right balance - See where you apply force on the pedal to ensure proper cleat position and track seated vs. standing to see how position changes efficiency - Intended for Rally RK100

Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RK100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RK100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite LOOK KEO cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 334g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

The Speedplay Nano is a featherweight, dual-sided road pedal that lives up to the demands of sprint finishes, categorized climbs, and tough training sessions. The mix of premium titanium and carbon fiber materials creates a lightweight but strong pedal that will hold up and deliver speed on the breakaway. The integrated cleat system with 3-axis adjustability allows you to precisely dial in your fit for optimized biometrics and increased power transfer. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics. Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day. - Weight: 168g (per pedal pair) - Spindle Material: Titanium - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

The XPRO 12 SL is the ultimate expression of pedal technology, making it TIME’s lightest and most ergonomic road pedal. The XPRO 12 SL’s carbon body and proprietary design create a powerful structure to transfer power from your legs to the road. Power transfer and stability are enhanced with a larger pedal surface area of 725mm-squared compared with the already large surface area of the XPRESSO at 700mm-squared. The ICLIC system, with its pre-opened design, allows for positive engagement and greater comfort. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. Finally, the XPRO 12 SL features watt-saving ceramic bearings and a super light hollow titanium spindle, resulting in an overall weight of 87.3 grams per pedal. The carbon blade is also adjustable in three positions to optimize engagement tension. The pedal’s low stack height keeps the cyclist’s sole as close to the center of the pedal axle as possible, which, along with the large pedal surface area, results in incomparable pedaling efficiency and comfort. We recommend a maximum weight of 90kg. - TIME’s ultimate road performance pedal, designed to be aero and light weight - Carbon fiber body with hollow titanium spindle and ceramic bearings - Fast and easy cleat engagement with three tension settings of the carbon blade - ICLIC Float Cleat allows float angularly and laterally while clipped in - Low stack height for good clearance - ICLIC Cleats included

Time XPRO 12SL Pedals - Single Sided Clipless, Carbon, 9/16" The XPRO 12 SL is the ultimate expression of pedal technology, making it TIME’s lightest and most ergonomic road pedal. The XPRO 12 SL’s carbon body and proprietary design create a powerful structure to transfer power from your legs to the road. Power transfer and stability are enhanced with a larger pedal surface area of 725mm-squared compared with the already large surface area of the XPRESSO at 700mm-squared. The ICLIC system, with its pre-opened design, allows for positive engagement and greater comfort. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. Finally, the XPRO 12 SL features watt-saving ceramic bearings and a super light hollow titanium spindle, resulting in an overall weight of 87.3 grams per pedal. The carbon blade is also adjustable in three positions to optimize engagement tension. The pedal’s low stack height keeps the cyclist’s sole as close to the center of the pedal axle as possible, which, along with the large pedal surface area, results in incomparable pedaling efficiency and comfort. We recommend a maximum weight of 90kg. TIME’s ultimate road performance pedal, designed to be aero and light weight Carbon fiber body with hollow titanium spindle and ceramic bearings Fast and easy cleat engagement with three tension settings of the carbon blade ICLIC Float Cleat allows float angularly and laterally while clipped in Low stack height for good clearance ICLIC Cleats included

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.

KEO BLADE CARBON CERAMIC Ti pedals are the flagship model of LOOK's road pedal range. They feature carbon blade technology which bears its name, ceramic bearings and the addition of titanium spindles, creating a pedal of incomparable weight and impressive aerodynamics. These pedals are designed to win. - New leading edge profiling for increased aero dynamics and reduced drag - Improved sealed spindle design to resist water intrusion with dual sealed ceramic bearings and 1 needle bearing - Better retention lever durability compared to previous design - Easier clip-in rotation due to improved weight balance - 3-part high grade stainless steel contact points for higher impact resistance and durability - 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure - Easy clip in/out with composite blade retention 16 (installed) - Carbon Body, Titanium Spindle - KEO cleats included

Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.

The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less. - Titanium wings for reduced weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Spindle material: forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: 6AL/4v titanium - Spring material: 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Endcap hex alloy - Cleat: Premium brass cleats with shims included - Weight: 445 grams

Time Speciale 12 Pedals - Dual Sided Clipless with Platform, Aluminum, 9/16" The Speciale 12 is the ultimate balance between aesthetics and performance. This grippy, lightweight, and strong pedal was developed for the demands of professional enduro, trail, and more. The Speciale 12 features an alloy anodized platform, titanium spindle, and is available in two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. The pedal is spring-retention adjustable (micrometric) to exceed the demands of the most advanced riders. The Speciale 12 features TIME’s renowned ATAC design for easy entry and mud clearance. TIME’s renowned engagement system allows easy engagement with a positive, predictable entry and release. Premium design and performance in all conditions for enduro, trail, and downhill Alloy platform body with titanium spindle Easy engagement and performance in all conditions ATAC cleat design clears mud with every step-in ATAC Standard Cleats included

The Speciale 12 is the ultimate balance between aesthetics and performance. This grippy, lightweight, and strong pedal was developed for the demands of professional enduro, trail, and more. The Speciale 12 features an alloy anodized platform, titanium spindle, and is available in two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. The pedal is spring-retention adjustable (micrometric) to exceed the demands of the most advanced riders. The Speciale 12 features TIME’s renowned ATAC design for easy entry and mud clearance. TIME’s renowned engagement system allows easy engagement with a positive, predictable entry and release. - Premium design and performance in all conditions for enduro, trail, and downhill - Alloy platform body with titanium spindle - Easy engagement and performance in all conditions - ATAC cleat design clears mud with every step-in - ATAC Standard Cleats included

The XPRO 12 is the go-to pedal for top racers, thanks to its light weight and ergonomic design for countless hours of riding without pedal-induced discomfort. With its carbon body and titanium axle, the XPRO 12 is wildly light but robust. The pedal’s large 725mm-squared surface area provides efficient power transfer and vital stability, so you’re ready for sprints and explosive efforts. The pedal’s bottom fairing helps improve aerodynamics and protect the carbon blade. TIME’s patented pre-opened ICLIC system allows for fast and easy cleat engagement, so you are fast off the line. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. The XPRO 12 uses a titanium axle for a maximum rider weight of 90kg. - Light, ergonomic, aero performance pedal - Carbon fiber body with titanium spindle - Fast and easy cleat engagement with three tension settings of the carbon blade - ICLIC Float Cleat allows float angularly and laterally while clipped in - Low stack height for good clearance - ICLIC Cleats included

Size-specific, premium concave platform pedal provides optimal shoe/pedal interface. - Titanium spindle for weight reduction - Optimal surface area - Minimal profile: 11mm-13mm thin - Concave platform for secure foothold - 10 adjustable pins per side for grip - Premium bearings and seal system - Stamp Small: Recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp Large: Recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Spindle material 6AL/4v titanium - Body material: 6061-T6 aluminum - Footprint: 100mm x 100mm (Small)/114mm x 111mm (Large) - Weight: 299 grams per pair (Small)/325 grams per pair (Large) - Adjustable pins 10 per side

The Vault Mag SL MTB flat pedals are born from DMR's quest for production methods that are more environmentally friendly and less wasteful. Thanks to the unique use of pressure die-casting technology, the Vault Mag SL achieves these goals. The combination of lightweight magnesium body and Ti Nitride axle equates to just 332g per pair. When weight and performance are paramount, the Vault Mag SL mountain bike pedal delivers. - ED Painted black finish - Tried and tested at pro level - 17mm concave footbed - Titanium Nitride Axle - High Load DU bush system - Replaceable steel pins - Rider weight limit 187lbs

Time ATAC XC 12 Pedals - Dual Sided Clipless, Carbon, 9/16" The ATAC XC 12 is TIME’s lightest off-road pedal, purpose-built for quick windup and trail speed. This premier XC pedal is also designed for your comfort thanks to an ergonomic design, starting with simple clip-in thanks to a wide-angle of positive cleat engagement. Once you’re clipped in, the features of ATAC XC 12 really kick in: Freedom of movement, lateral and angular, for reduced injuries and muscle fatigue. The pedal’s self-cleaning design clears mud and debris each time you step in. Light and strong with a titanium axle and carbon body, ATAC XC 12 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is ideal for gravel and cyclocross as well. Designed for performance in off-road conditions; Ideal for cross country, gravel, or cyclocross Carbon fiber body with titanium spindle for light weight Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in Tension adjustment ATAC Standard Cleats included

The ATAC XC 12 is TIME’s lightest off-road pedal, purpose-built for quick windup and trail speed. This premier XC pedal is also designed for your comfort thanks to an ergonomic design, starting with simple clip-in thanks to a wide-angle of positive cleat engagement. Once you’re clipped in, the features of ATAC XC 12 really kick in: Freedom of movement, lateral and angular, for reduced injuries and muscle fatigue. The pedal’s self-cleaning design clears mud and debris each time you step in. Light and strong with a titanium axle and carbon body, ATAC XC 12 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is ideal for gravel and cyclocross as well. - Designed for performance in off-road conditions; Ideal for cross country, gravel, or cyclocross - Carbon fiber body with titanium spindle for light weight - Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in - Tension adjustment - ATAC Standard Cleats included

Ride with rage without compromising safety. This is what best defines the X-TRACK EN-RAGE, our top-of-the-line enduro pedal. The PLUS Ti model features a titanium axle for added strength and improved stiffness all while shaving grams. The wide, forged aluminum body on all PLUS models will increase stability and support across the most challenging terrain. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Forged Aluminum - Spindle: Titanium - Platform area: 664mm² - Platform width: 67mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 200g - Weight (pair + cleats): 450g - Float angle: 6° - Release angle: 13°

Built to take on anything, the SPEEDPLAY ZERO road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel dual-sided bike pedal and integrated cleat system offer peak power transfer and exceptional durability. The customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Cleats are included. DUAL-SIDED ENTRY SPEEDPLAY ZERO pedals' symmetrical form factor allows for dual sided pedal entry when clipping in. No more fumbling, fussing or kicking your pedal over; take off when the light turns green and clip in with ease. ENHANCED WALKABILITY The slim profile cleat and rubber texture create enhanced stability when walking in your road shoes off the bike. INTEGRATED PROFILE SPEEDPLAY ZERO pedals and Standard Tension Cleat create a seamless integration for a streamlined profile. The secure connection can contribute to an increase in the transfer of power, which can make it easier to attain those hard fought watts. UNBEATABLE STACK HEIGHT Best-in-class stack height of the SPEEDPLAY pedal decreases the amount of material between your shoe and spindle. This provides a solid connection for a more fluid transfer of power with every pedal stroke. 3-AXIS CLEAT ADJUSTABILITY The Standard Tension Cleat can be positioned on the bottom of the shoe and adjusted fore-aft, left-right and rotationally, allowing between 0-15 degrees of float. OPTIMIZED BIOMECHANICS The 3-axis adjustability and slim stack height of the SPEEDPLAY Advanced Bike Pedal System allows the rider to customize their fit on the bike with the largest range of optionality. The lower stack height can allow for increased power transfer and a decreased saddle height, which results in reduced drag. ROTATIONAL FREE FLOAT SPEEDPLAY pedals allow up to 15 degrees of float, allowing the heel to pivot around the center of the pedal. This range of motion in the foot, lower leg and knee increases comfort and enhances pedal efficiency. SUPERIOR CORNERING CLEARANCE The slim profile of the SPEEDPLAY Advanced Pedal System allows for the greatest degree of lean on the bike when riding tight corners. Pedal with confidence knowing your pedal won't strike the ground, and leave the competition in the dust. STANDARD TENSION CLEAT INCLUDED SPEEDPLAY ZERO pedals include a set of Standard Tension Cleats and cleat surrounds for the most aerodynamic profile & walkable system. EASY TENSION CLEAT COMPATIBLE SPEEDPLAY Advanced Pedal System has cross cleat compatibility. Purchase the Easy Tension cleat, sold separately, for less resistance when unclipping.

Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed

The X-TRACK RACE CARBON Ti pedals are specifically created for the most unforgiving courses. The mechanism is designed for easy engagement in all conditions and helps to shed mud and debris when clipping in. The carbon body offers a large contact area, while the titanium axle ensures the pedal is stiff and light: a mere 145 grams underfoot. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Carbon - Spindle: Titanium - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 145g - Weight (pair + cleats): 340g - Float angle: 6° - Release angle: 13°

The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

Time XPRO 12 Pedals - Single Sided Clipless, Carbon, 9/16" The XPRO 12 is the go-to pedal for top racers, thanks to its light weight and ergonomic design for countless hours of riding without pedal-induced discomfort. With its carbon body and titanium axle, the XPRO 12 is wildly light but robust. The pedal’s large 725mm-squared surface area provides efficient power transfer and vital stability, so you’re ready for sprints and explosive efforts. The pedal’s bottom fairing helps improve aerodynamics and protect the carbon blade. TIME’s patented pre-opened ICLIC system allows for fast and easy cleat engagement, so you are fast off the line. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. The XPRO 12 uses a titanium axle for a maximum rider weight of 90kg. Light, ergonomic, aero performance pedal Carbon fiber body with titanium spindle Fast and easy cleat engagement with three tension settings of the carbon blade ICLIC Float Cleat allows float angularly and laterally while clipped in Low stack height for good clearance ICLIC Cleats included

KEO BLADE CARBON CERAMIC pedals take the BLADE series to the next level, featuring a Chromoly axle paired with ceramic bearings for even more reliability and performance. Beyond its weight, the larger surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to race with confidence. - New leading edge profiling for increased aero dynamics and reduced drag - Improved sealed spindle design to resist water intrusion with dual sealed ceramic bearings and 1 needle bearing - Better retention lever durability compared to previous design - Easier clip-in rotation due to improved weight balance - 3-part high grade stainless steel contact points for higher impact resistance and durability - 64mm wide platform and 700mm² contact surface provides maximum power transfer and distribution of foot pressure - Easy clip in/out with composite blade retention 12 (installed) - Carbon Body, Chromoly + Spindle - KEO cleats included

5Dev's most aggressive and lightest pedal. At 343g, its low profile design, 24 pins and razor sharp 5 Axis Machined Design, makes it the ideal choice for the advanced rider looking for ultimate traction and performance from a flat pedal Features strategic pins and machined grooves to deliver optimal grip for aggressive riding Constructed from space-grade aluminum and featuring double-sealed bearings Axle material: 17-4 stainless steel. Internals: 1 Igus bushing and 4 bearings Platform: 106x110mm Weight: 343g Size: 9/16"

- Evo+ series features ultra-thin body for improved ground clearance reduced Q-factor and a lower center of gravity - Extruded CNC machined aluminum body with dual DU bushings and EVO bearings - 10 replaceable pins per side

- The Crankbrothers Mallet Trail BOA® clip-in shoe is the perfect blend of performance and adventure. Built for the trail or your next enduro race, the Mallet Trail BOA® will provide you all-day comfort paired with ultimate racing performance. - A lightweight yet durable ripstop upper features a TPU-reinforced toe box for enhanced protection and a flexible collar around the ankle to prevent debris from entering the shoe. In addition, a fiber-reinforced shank and an aggressive outsole lug pattern bring pedaling efficiency and all-terrain versatility to every ride.

This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow. - 105x115mm pedal body - 17mm concave foot bed - Extruded 6061 aluminum body and 4140 chromoly steel axles - High-load DU bushing and cartridge bearing - 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired - 9/16"

- 2-sided clipless pedal for gravity riders - Large platform extruded and CNC machined aluminum body - Updated cage with front plates and bevelled edges - 685zz sealed bearings and IGUS bushing - Adjustable cleat engage/release tension on each side

Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. Slim Convex Profile Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support. Extra Grip Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized. Formed with Purpose The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer. Reliable Performance Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Precision Machining Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.

- Larger platform aluminum body with 2-sided clipless mechanism for DH/AM use - Low profile machined aluminum platform - Triple sealed bearings with DU bushing - Adjustable cleat engage/release tension on each side - X1 4d & 8d cleats replaceable pins

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

- Pedal Weight (pair): 260g - Size: 102 X 96 X 11 mm - Body Material: magnesium extruded / CNC machined - Spindle: CNC machined, cr-moly - Pedal Bearings: thrust bearings / IGUS bushings - Pins: replaceable SAP (1/8" x 8mm) pins

At Hope we produce products for the true riders. This means developing the best components, not only for the extremes of downhill or EWS, but also for the punishing environment of XC racing and endurance riding. Here, balancing strength, weight and performance is key and we have now applied all our years of expertise into the clipless pedal. KEY FEATURES - Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release - Dual sided - Fully CNC Machined pedal bodies - Stainless steel clips and cleats - Pedals supplied with two cleats options - Large shoe/pedal contact area for maximum power transfer and stability - Replaceable pins for increased grip on Union TC (8 pins) - Available in black, silver, bronze, red, blue, orange and purple - Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability - Fully serviceable and re-buildable - Axle is high strength Cr-Mo, heat treated and plated - Titanium axle upgrades available - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with option of 4 pins per side.

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

- The All Around Pedal provides riders with more freedom of movement on the pedal and a less locked in feel. Ideal for the rider who likes to reposition their feet and make adjustments on the fly - Tons of grip when you need it, but a bit more movement when you want it, making the All Around Pedal an ideal choice for Trail, Park, Enduro, DH and Freeriding - Constructed from space-grade aluminum and featuring double-sealed bearings with 10 pins per side - Axle material: 17-4 stainless steel. Internals: 1 Igus bushing and 4 bearings - Platform: 106x110mm - Weight: 365g

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearing & double seal system

Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other, with the added security of the VISION light system for when the ride turns dark. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Aluminum - Traction: 8 traction pins - Spindle: Chromoly+ - Platform width: 83mm - Weight (pedal): 247g - Weight (pair + cleats): 550g - Light included: Yes (x2) - Light modes: 3 (steady/flash/flash eco) - Battery Life: Up to 30h (flash eco) - Light Output: 15 lumens - Battery: Micro USB rechargeable (cable included) - Charging time: 50 min - Beam angle: 180°

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

- Enhanced pedal-to-shoe contact area with mud-shedding profile - Wide bearing placement for rigidity and uniform load distribution - Slimmer, weight-optimized axle with 2 length options - Low platform height for pedaling stability - Lightweight, 310 g (11 oz.) per pair - Slimmer axle housing better sheds mud and debris - Binding Dual Sided - Cartridge axle - SM-SH51 Cleat included - Cleat retention adjuster - Offset binding - Sealed mechanism - Average weight: 310g (Short axle type) - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD) - 3 mm shorter axle version (52mm) - 1.0 mm cleat spacer included

Time Speciale 10 Pedals - Dual Sided Clipless with Platform, Aluminum, 9/16" The Speciale 10, while inspired by the premium Speciale 12, stands on its own as a high-performance pedal. This pedal is up to the challenge of whatever downhill, Enduro and trail riding throws your way. Pick from two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. Grippy and durable, the Speciale 10 features an alloy anodized platform and oversized hollow steel spindle. The pedal is spring-retention adjustable (micrometric) to meet the demands of advanced riders and features TIME’s ATAC design for easy entry, predictable release, and mud clearance for reliable performance in all conditions. Designed for performance in all conditions for enduro, trail, and downhill Alloy platform body with hollow steel spindle Easy engagement and performance in all conditions ATAC cleat design clears mud with every step-in ATAC Standard Cleats included

The Speciale 10, while inspired by the premium Speciale 12, stands on its own as a high-performance pedal. This pedal is up to the challenge of whatever downhill, Enduro and trail riding throws your way. Pick from two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. Grippy and durable, the Speciale 10 features an alloy anodized platform and oversized hollow steel spindle. The pedal is spring-retention adjustable (micrometric) to meet the demands of advanced riders and features TIME’s ATAC design for easy entry, predictable release, and mud clearance for reliable performance in all conditions. - Designed for performance in all conditions for enduro, trail, and downhill - Alloy platform body with hollow steel spindle - Easy engagement and performance in all conditions - ATAC cleat design clears mud with every step-in - ATAC Standard Cleats included

Torqlite UL Pedals feature a CNC machined ultra-light body with an incredibly thin 17mm platform for extra clearance. - Large platform for extra stability - Hardened chromoly replaceable pins - Heat-treated chromoly spindle - Sealed cartridge bearings - Spindle size: 9/16-inch - 395g/pair

Get a little more ankle room with this long-spindle version of Crank Brothers' Mallet E pedal. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface  - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

Full suspension or entirely rigid, upon a mountain top or deep in the woods, it’s up to you to define your trail. The Mallet Trail pedal fills the missing piece in Crankbrother's clip-in range, sitting perfectly between the Candy and Mallet E pedals. Equipped with a long spindle for stability and speed, two adjustable pins per side for added traction, and their eggbeater system with 4-sided entry and superior mud shedding, the Mallet Trail is ready to join you on your next adventure. - Optimized platform size and surface for trail/gravel riding - Long spindle, 57mm q-factor for more shoe clearance and stability at speed - Integrated traction pad technology to customize and optimize the shoe/pedal interface - 2 adjustable pins per side for grip - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle

Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)