Other

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

- Cartridge Bearing - 1-3/8-inch Outer Diameter

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

- DT Swiss cartridge bearings - Sold in pairs

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- Tubular alloy construction - Padded hand grip section - Integrated, replaceable and adjustable padded arm rests - Easy clip on installation fits most road bars - Clamp Size: 22.2–25.4mm

- Axle mount rear derailleur guard - Essential for children`s multi-speed bikes

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Alloy construction - Great for Cruiser or BMX bar conversions

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

Sunlite's Lowrider Sissy Bar adds that level of style and classic looks that only a nice, long sissy bar can. Keep that banana seat comfortably slung and looking tight.

- Routes cables underneath the bottom bracket - Will not rust or corrode

• Aluminum • CNC-finished

- Rust resistant coating - M5x.80mm Thread pitch - Bag of 10 - Size: M5 x 16 Thread Pitch: Braze-on bolt

- Large Flange-Fits Splined MX Cranks - Sold in pairs

- Stainless steel button head bolts - Sold in bags of 10

The Sunday Knox V2 guard sprocket made of 7075-T6 aluminum. Featuring refined machining geometry for a sleeker look, and designed to work with and protect all chains from unwanted impact. - Full guard on one side of the sprocket with 5 rotatable sprocket bolt hole positions - CNC machined 7075-T6 aluminum - Designed to work with and protect all BMX chains

Supplier Part: HMN-386 Use: Front Axle Nut Dome

Adjustable spring rate coil that's also progressive. Sprindex is specifically designed to have a progressive spring rate for the last 20% of stroke for big hit support and for bikes with a linear linkage design. - Adjustable spring rate - Adapters included for different size shocks and set ups - Made of super high tensile spring steel

Specialized Callahanger Standard with bolts Specialized 9893-4295

The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs. - Ultra-fine spring rates to ensure perfect set up for all weights. - Spring rates are broken down to 4 N/mm (23 lbs./in). - Fits Ohlins TTX shock absorber for Stumpjumper FSR only. - Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.

Re-engineered clamp with an optimized center-loaded bolt design equalizes load distribution to ease position adjustments. With this clamp set you will be able to clamp metal 7x7mm saddle rails and Specialized FACT carbon 7x9mm saddle rails. - 7x7mm and 7x9mm replacement clamp set for all Specialized road seatposts equipped with a single-bolt cylindrical wedge clamp design - New design clamp for better clamping and non-slipping of the saddle

MY07 STUMPJUMPER 130 BOLT KIT - 06-07 STUMPJUMPER 130 BOLT KIT

We won't blame you for attention to detail. In fact, Spank's got your back. These headset spacer kits are available in 8 popular colors, and come with 3 rings in incremental sizes, to make your next cockpit set up a thing of ease and beauty. - Material: Alloy - Sizes (mm): 3 / 6 / 12 - Diameter: 1 1/8" (28.6mm) - Finish: Brushed Anodized

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

Get your scratched Shimano Dura-Ace shifters looking new again with these replacement name plates. They're perfect for sprucing up a well-used bike or erasing the marks of a crash.

Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly

Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.

Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Shimano mounting bolts for flat-mount disc brake calipers. Bolts sold individually Attaches front or rear caliper to frame or fork mounting plate

Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

Shimano RD-6870 Plate Axle Assembly (SS)

Shimano Di2 Frame Junction Box Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions

Shimano Miscellaneous Rear Derailleur Parts For repairs on Shimano Rear Dearailleur

Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for XTR RD-M9000 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control

Lip-Locks don’t just secure your seatpost. They do it while looking good! Add a little functional bling to your ride. Available in a variety of sizes and color choices. - Non-quick-release version of the Flip-Lock - Stainless steel pivot and bolt - Black, Silver, Blue, Green, Red, and Pink anodized with laser-etched logo - Black = 28.6, 30.0, 30.6, 32.0, 35.0 and 36.4mm - Silver, Blue, Green, Red, Gold, and Pink = 30.0, 30.6, 32.0 -and 35.0mm - Orange, Purple, and Lime = 30.0, 32.0, and 35.0mm - 34g

Lip-Locks secure your seatpost and add functional bling to your ride. - Non-quick release version of the Flip-Lock - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads

Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts

The AXS battery cover is a light-weight cowling designed to protect the battery while installed on the derailleur. The AXS Battery Cover fits all AXS mountain bike derailleurs.

SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups

Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

Flat Mount Disc Caliper Bracket Bolts

Force eTap AXS Rear Derailleur Pulley Kit - Steel bearings - 12-Speed

Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm

Original equipment rear derailleur pulleys for SRAM rear derailleurs. - NX/SX Eagle Rear Derailleur Pulley Kit

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Trigger Clamp/Bolt Kit For X0 X9 X7

Red eTap battery terminal cover

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Replacement hoods for SRAM hydraulic shifter/brake levers.

- For charging batteries in European countries

Innerbarends are an innovative evolution of the good old barends from the early days of mountainbikes, but with a never-before-seen safety aspect. The Innerbarends are mounted inwards of the grips, hence the name, and allow you to move the hands far inwards, positioning the elbows such that they can comfortably rest against your torso. The position somewhat resembles that of an aerobar. This position also stretches the upper body slightly more forward, adding both an aerodynamic and biomechanical advantage. Despite the different hand position, the brake levers always remain in reach. Innerbarends are ideal for MTB racing, XC, marathon, trail riding, touring, and all-mountain as well as Enduro, where they provide a perfect riding position for recovery on transition stages. They're also a great addition to the handlebars of trekking bikes or city bikes.