Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$4.50
ABI Standard Design Cartridge Bearings.
90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
Specs:
-Thickness: 8
-Material: Steel
-Bearing O.D. (mm): 26
-Manufacturer Number: 6000
-Bearing I.D. (mm): 10

$7.00
ABI Standard Design Cartridge Bearings.
90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
Specs:
-Thickness: 9
-Material: Steel
-Bearing O.D. (mm): 37
-Manufacturer Number: 6904
-Bearing I.D. (mm): 20

$7.60
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$8.00
ABI Standard Design Cartridge Bearings.
- 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
- If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
Thickness: 7
Material: Steel
Bearing O.D. (mm): 22.2
Manufacturer Number: R6
Bearing I.D. (mm): 9.5

$8.00
ABI Standard Design Cartridge Bearings.
90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
Specs:
-Thickness: 8
-Material: Steel
-Bearing O.D. (mm): 28.5
-Manufacturer Number: R8
-Bearing I.D. (mm): 12.7

$8.50
ABI Standard Design Cartridge Bearings.
90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
Specs:
-Thickness: 7
-Material: Steel
-Bearing O.D. (mm): 32
-Manufacturer Number: 6804
-Bearing I.D. (mm): 20

$8.50
ABI Standard Design Cartridge Bearings.
- 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals
- If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed
Specs:
- Thickness: 6
- Material: Steel
- Bearing O.D. (mm): 24
- Manufacturer Number: 6901
- Bearing I.D. (mm): 12

$8.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$8.89
- MAX bearings provide 35-40% more load capacity than standard radial bearings by employing with a special design where the maximum number of balls (full-complement) are inserted into the bearing.
- The race grooves are also deeper on these bearings to provide increased lateral support to counteract the twisting and multi-directional forces associated with mountain bike pivots.
- This MAX-type, Black-Oxide bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.
- Black-Oxide/Magnetite coating provides an extra level of corrosion resistance and extended worry free performance.
- Thickness: 7
- Bearing O.D. (mm): 24
- Bearing I.D. (mm): 9

$8.89
- MAX bearings provide 35-40% more load capacity than standard radial bearings by employing with a special design where the maximum number of balls (full-complement) are inserted into the bearing.
- The race grooves are also deeper on these bearings to provide increased lateral support to counteract the twisting and multi-directional forces associated with mountain bike pivots.
- This MAX-type, Black-Oxide bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.
- Black-Oxide/Magnetite coating provides an extra level of corrosion resistance and extended worry free performance.
- Thickness: 6
- Bearing O.D. (mm): 22
- Bearing I.D. (mm): 10

$9.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$9.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$10.30
- This 440C stainless steel material provides maximum corrosion resistance bearings. Stainless steel is a good alternative in constant wet conditions, or where sweat becomes a problem such as headset bearings.
- Enduro Bearings uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements.
- 440C stainless steel balls and races
- OE bearing for Surly Trailer Skewer and Hitch Mount Nuts
Specs:
- Thickness: 5
- Material: Steel
- Bearing O.D. (mm): 24
- Manufacturer Number: 6802
- Bearing I.D. (mm): 15

$13.03
- Bearings meeting the ABEC-5 standard. High precision Grade 5 - Chromium Steel balls are within 5/1,000,000? round.
- Grade 5 ball bearings with nylon ball carriers
- Thickness: 7
- Material: Steel
- Bearing O.D. (mm): 26
- Bearing I.D. (mm): 15

$14.21
- Bearings meeting the ABEC-5 standard.
- High precision Grade 5 Chromium Steel balls are within
5/1,000,000? round.
- Grade 5 ball bearings with nylon ball carriers
- Thickness: 7
- Material: Steel
- Bearing O.D. (mm): 37
- Bearing I.D. (mm): 24

$14.42
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$15.40
- This 440C stainless steel material provides maximum corrosion resistance bearings. Stainless steel is a good alternative in constant wet conditions, or where sweat becomes a problem such as headset bearings.
- Enduro Bearings uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements.
- 440C stainless steel balls and races
Specs:
- Thickness: 7
- Material: Stainless Steel
- Bearing O.D. (mm): 22
- Bearing I.D. (mm): 9

$24.00 - $29.00
- Blue polyurethane upgrade dust wipers and oil seals
- Dual lip offers improved seal with lower stiction
- Fox 32mm and 36mm kits include wipers, oil seals, crush washers, and foam rings
- Fox 40mm kits include wipers and seals

$31.99
ABI Headset Bearing for new builds or replacements
- Thickness: 6.5
- Cartridge Bearing Angle: 36x36
- Bearing O.D. (mm): 51
- Bearing Type: Cartridge
- Bearing I.D. (mm): 40
Page 1 of 1