Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$9.40 - $10.10
- Expanding replacement bar end plugs with hex bolt
- Anodized alloy end caps
- Compatible with most handlebar styles
- 18.2mm OD expander/25.5mm OD end cap

$12.20
- Push-in replacement CNC alloy bar end plugs
- MTB-specific design
- Anodized alloy end caps
- Compatible with most handlebar styles
- 20mm OD plug/25mm OD end cap (Road)
- 20mm OD plug/30mm OD end cap (MT

$19.39
Converts CenterLock hubs to accept 6-bolt rotors
- Available for standard Quick Release as well as Thru-Axle hubs
- Extruded alloy collar with CNC shoulder pins and lock ring
- Eliminates the need for rotor bolts

$6.80
Origin8's Twistr 15mm Top Cover is a high profile 15mm top cover for Origin8 Twistr Series headsets. This CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings.

$16.79
- AL6061-T6 alloy seatpost clamp with an integrated adjustable cable guide
- Ideal for routing brake and dropper post cables and housing
- Chamfered edges and ovalized hole design protects carbon frames and seatposts
- 31.8mm for 27.2mm seat posts and 34.9mm for 31.6mm seat posts
- 16mm height

$14.39
- Push-in replacement CNC alloy bar end plugs
- MTB-specific design
- Anodized alloy end caps
- Compatible with most handlebar styles
- 20mm OD plug/25mm OD end cap (Road)
- 20mm OD plug/30mm OD end cap (MTB)

$8.55
Expanding replacement bar end caps with hex bolt
- Reflective silver graphics
- Universal sizing fits most bar styles including Road and MTB
- 18.2mm OD

$12.29
Steel 1mm spacer fits Shimano cassette bodies
- Great for 10 sp cass on 8/9 sp hubs
- Also for many other fit applications

$6.60
- Anti chain-suck device
- Allows the front derailleur to be adjusted for strong downshifts
- If not using front derailleur the device can act as a chain guide

$10.89
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

$42.49
• Machined alloy arm
• (ISCG Mount) international standard
• Adjustable design
• Sealed cartridge bearing
• Prevents dropped chains on mountain bikes

$13.99
Origin-8's Grip N Seal QR Seat Clamp is forged from light and durable aluminum and features a rubber weather seal and an anodized finish to prevent corrosion. Its high-leverage quick-release lever makes it easy to raise/lower your seat.

$66.20
• 6061-T6 tubular aluminum construction
• Laser etched graphics
• Independent arm rest and bar adjustment
• Does not include armrests
• Cannot mount shifters onto ends
• Clamp diameter: 25.4-31.8mm
• Extension length: 105mm

$71.39
Axle Adapters for use with MT-3100 series hubs
- Aluminum alloy shells resist corrosion and provide lightweight longevity
- Sealed cartridge bearings offer smooth operation while resisting contaminents
- 15mm Thru Axle, 6 bolt disc compatible in boost and standard configurations
- Spacing/Axle: 12TA 142mm

$15.59
Is your seat post just a hair too small for your frame? Origin-8's Multi-Fit Seat Post Shim is a great solution.
• Multi-Fit
• Aluminum
• 25.4mm internal diameter
• 28.0mm outer diameter

$12.29
- Replaces existing top cap, and allows the use of a bottle cap as a decorative cover
- Compatible with both twist off and crimped style bottle caps
- Bottle cap is held in place by two strong magnets
- Easy to switch out bottle caps
- AL6061 alloy cap and AL7075 alloy bolt

$11.49
Origin-8's Pro Force QR Seat Clamp is forged and machined from light and durable aluminum and has an extra-leverage design to hold fast. This fine clamp boasts an anodized finish and a long quick-release lever for excellent clamping force. It also gives you more to hold onto so it's easier to raise/lower your seat.

$8.89
- Anodized or powder coated finish
- Allows for secure clamping
- Forged aluminum construction
- 34.9mm clamp diameter

$24.79
Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.

$6.45 - $8.89
- Machined AL6061 alloy construction
- Center sleeve for use with Revolvr outboard bottom brackets
- Converts 68/73mm outboard bottom bracket to a 100mm or 120mm fat bike model
- Seals and protects the bearings from harmful contaminants
- Center sleeve only: Revolvr outboard bottom brackets sold separately
Page 1 of 2
Next page