Other

Flat Mount Disc Caliper Bracket Bolts

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Useful on some bikes with 135mm rear dropout spacing that have cranks with longer spindles.

Replacement hoods for SRAM hydraulic shifter/brake levers.

- Lever Internals Gen 2 Level Ultimate/TLM/TL Qty 1

- GX Eagle Rear Derailleur B-Bolt and Limit Screw Kit Hex5

REAR DERAILLEUR CAGE ASSEMBLY KIT RED XPLR AXS (FULL REPLACEMENT CAGE ASSEMBLY INCLUDING OUTER AND INNER CAGES, DAMPER AND PULLEYS) Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. Information contained on SRAM Connect is subject to change at any time without prior notice.

Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included

- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1

- GX DH/X01DH 7 Speed Rear Derailleur B-Bolt and Limit Screw Kit Hex5

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS

Customize your ride with SRAM bar end plugs.

Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken

Force eTap AXS Rear Derailleur Pulley Kit - Steel bearings - 12-Speed

For filling and sealing off unused holes in your bicycle frame.

Disc Brake Adaptors - Includes Stainless Bolts

TT Brake Lever Hardware Kit

- Replacement Stealth Ring elastomer set for XG-1090 X-Dome cassette - Fits 11-23

Replacement parts for Zipp aerobars. Compatible With: - HB-VKAL-BS1-A1, HB-VKAL-BS1-A2, HB-VKAL-CLIP-A1, HB-VKAL-CLIP-B1, HB-VKAL-EXT-A1, HB-VKAL-EXT-A2

Ergonomic design for comfort in a variety of hand positions. -Compatible with SRAM eTap Shifting/Brake Levers

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws

Red eTap battery terminal cover

- Includes barb and olive - Brake Lever Clamp: 22.2mm, MMX compatible - Lever Blade Material: Carbon - Reach Adjust: Tool-free

- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1

BB30 Spacer - 15.46mm

Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No