Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Surly Hurdy Gurdy
$35.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.
Problem Solvers Bow Tie Strap Anchor Kit
$17.99
Attach these lightweight brackets to your water bottle bosses to serve as anchors for your cargo straps to carry just about anything, from sleeping pads to Nalgene bottles to barbeque sauce. These are a great addition to any bikepacking or touring cyclist’s on-bike storage toolkit. And their low profile means they don’t mess up the looks of your bike build while not in use.
KMC MissingLink Connector
$1.00 - $15.38
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Surly Tuggnut Chain Tensioner
$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Bontrager Speed Concept Seatpost Cap
$52.99
Bontrager's Speed Concept Seatpost Cap lets you get your position dialed for your next triathlon or time trial. Two different saddle offsets and widely a adjustable saddle angle means you'll find the perfect fit for your race against the clock.
Shimano 12-Speed Chain Quick Link
$13.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
SRAM Rival D1 Powermeter Crank Arm Bolt Kit
$19.00
- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1
Problem Solvers Handlebar Clamp Shim
$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Problem Solvers Cross Clamp
$24.99
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.
Giant Aero Bar Pad Kit
$25.00
Replacement foam pads for Giant Contact clip-on aerobar clamps
RockShox Maxle Lite Front Thru-Axle
$55.00 $59.00 7% Off
The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm
Problem Solvers Cassette Spacer
$4.99 - $7.75
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Shimano In-Line Brake Cable Adjuster
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Delta Stem Raiser
$34.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
Bontrager Blendr Pro Stem Bases
$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Problem Solvers 11-Speed Freehub Spacer for 10-speed cassette
$7.99
Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.
Bontrager Rotary Head Seatpost Saddle Clamps
$16.99
Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands
Surly Monkey Nuts
$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.
Sunlite Dog Leash
$29.99
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.
Problem Solvers Quick-Release Nut Light Mount
$19.99
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.
Problem Solvers I-Spec II Shifter Clamp
$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
SRAM Power Link Chain Connector
$18.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Chain Connector
$18.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM PowerLock Eagle Chain Connector 12-Speed
$17.00 - $18.00 $18.00 Up to 6% Off
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Giant Connect SL S-Bend Carbon Aerobar Extensions
$122.00
Giant's Connect SL S-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the S-Bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.
Giant EnergyPak Plus—Accessory
$110.00
- Accessory base plate to mount EnergyPak Plus on the bike. - EnergyPak Plus accessory comes with a water bottle cage adaptor plate that can be mounted to the base plate when the EnergyPak Plus is not in use.
Sunlite Chromoly Quill Stem Extender
$20.99
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
Wheels Manufacturing Chainstay Protector - Wide
$9.40
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Giant EnergyPak Connector Cover—Top Release
$12.75
- Dust-proof and waterproof rubber seal cover. - Protect the power source connection on the frame when the e-bike is parked outside or when you carry it without the EnergyPak.
Problem Solvers 1-1/8-inch Headset Spacers
$4.00 - $17.50
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Profile Design Legacy II Aluminum Aerobar
$96.00
Ergonomic Legacy II Aerobars feature extensions that provide a variety of hand positioning, and width and rotational armrests with a high stack to achieve a relaxed ride position. Ideal for riders that need extra positions for Centuries. - Injected Venturi Armrest and ZB Bracket - Forged 6061-T6 construction with armrest made of injected nylon and glass fiber - Fixed extension adjustment - Extension angle 44 degrees with 58mm rise - Fits both 26.0 and 31.8mm basebars, shims included
SRAM Flat Mount Disc Caliper Bracket Bolts
$6.00 - $28.00
Flat Mount Disc Caliper Bracket Bolts
FSA Torx T-30 Double Chainring Nut/Bolt Set
$19.99
This FSA Double Chainring Nut/Bolt Set feature T-30 Torx sockets to resist stripping and ensure that you have reliably secure chainrings. - Torx wrench included
ENVE Composites Fork Compression Plug
$25.00
A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.
BOX One 7075 Alloy Chainring Bolts
$29.99
Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes.
KMC MissingLink 12-Speed
$10.00 - $12.00
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
OneUp Components Bash Guide - ISCG-05 - V2
$94.50
Eliminate dropped chains forever with the new OneUp Components Bash Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there. NOT JUST FOR ENDURO RACERS. The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention. The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 90g 28-30T, 105g 32-34T, 110g 36T - Capacity: 28-36T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic
Origin8 Clampdown UL QR Seatpost Clamp
$12.79
- AL6061-T6 alloy quick-release seatpost clamp with CNC machined cut-outs - Stainless steel bushing ensures smooth lever action - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height
Ritchey WCS Headset Cartridge Bearing
$21.95 - $34.95
Genuine cartridge Ti-coated bearing for Ritchey WCS headset. - 45/45 degree angular contact bearing - Titanium-coated for corrosion resistance
Wolf Tooth Set of 5 Chainring Bolts+Nuts For 1x
$29.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6 mm long so they work perfectly with any bolt-on single chainring that does not have threaded standoffs. - Design and manufactured in Minneapolis, MN USA - 7-8 NM tightening torque with light grease on threads only - Material - 7075-T6 aluminum - Weight - 5 bolts = 10 grams
Shimano XTR M9000 Rear Derailleur Pulley Set
$42.80
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for XTR RD-M9000 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control
Giant Lock Ring Set
$8.00
- Color coordination, all the cool kids are doing it - Replacement lock rings for Giant Swage and Tactal Grips - 2 rings per package
Giant QR Seatpost Clamp W/ Rack Mount
$11.00
- Quick-release seatpost clamp w/rack mount
MRP 2x Dual Ring Chain Guide
$159.95
- Shiftable guide for SRAM and Shimano 2X cranks - Patented removable skid - Dual 9t sealed-bearing pulley design for superior chain management - BB, ISCG and ISCG-05 mounting options, 136g
Giant Alloy S-Bend Aerobar Extensions
$40.00
Giant Contact S Type Bar Extensions fit the Giant Connect SL and Contact Clip-On Bar Clamps to provide you with an aerodynamic riding position for triathlon and time trials. Featuring lightweight alloy construction. Features - 22.2mm carbon aerobar extensions - Compatible with 45203-04 Clip-on Aerobar clamp
Giant Alloy Straight Aerobar Extensions
$27.00
- 22.2mm carbon aerobar extensions - Compatible with 45203-04 Clip-on Aerobar clamp
Dia-Compe Brake Cable Ferrules
$35.99
- Dispenser of chromed ferrules - 5mm
TRP Rear Flat Mount Adapter
$15.99
Flat mount rear adapter for a 160mm rotor
Cane Creek Cane Creek ST G4 Elastomer Insert -Firm
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Firm
Sunlite Alloy Seatpost Shims
$9.99
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
Sprindex Sprindex Adjustable Weight Rear Coil Spring - Enduro, 540-610 lbs, 65mm, 2.6
$140.00
Adjustable spring rate coil that's also progressive. Sprindex is specifically designed to have a progressive spring rate for the last 20% of stroke for big hit support and for bikes with a linear linkage design. - Adjustable spring rate - Adapters included for different size shocks and set ups - Made of super high tensile spring steel
Wheels Manufacturing Aluminum Headset Spacer
$7.25 - $24.95
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
RockShox Maxle Stealth Front Thru-Axle
$28.00 - $45.00 $28.00 - $45.00 Up to 7% Off
The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
RockShox DebonAir C1 Air Spring Upgrade Kit – ZEB A1+
$45.00
Upgrade your ride. The highly tunable DebonAir air spring is ready for whatever the trail demands. Buttery smooth feel off the top, now optimized to maintain higher ride height and add more confidence on technical terrain.
Cane Creek Cane Creek ZN40-Bearing 41.8mm Zinc Plated, Each
$11.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
Wheels Manufacturing Wheels Manufacturing Derailleur Hanger 394
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
DT Swiss DT Swiss Cartridge Bearing - 1728
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss Cartridge Bearing - 1728
Wolf Tooth ShiftMount MM Shifter to I-Spec EV Brake
$29.95
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - ISEV-MM is for a Shimano I-SPEC EV shifter mounting to a SRAM MatchMaker brake
Page 1 of 31 Next page