Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$89.00 - $124.00 $124.00 Up to 28% Off
RockShox Rear Shock Parts
$123.99
- Internal junction-A with two e-Tube ports - Externally facing charging port eases charging, especially for internal batteries - Mounts in road bar end or in frames with an integrated mounting point - For easier cable routing, use along with EW-JC130 three-way e-Tube cable
$122.00
Giant's Connect SL Ski-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the ski-jump bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.
$121.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 26mm - Width: 5mm
$119.99
The clamp links the Blade to the Extensions and pad holders.
$119.95
The ReMote 360 is a joystick-style dropper lever that can be installed almost anywhere on the handlebars. It is compatible with all cable-actuated dropper posts. The lever can be pushed or pulled in any direction with a thumb or index finger. The clamp can be rotated 360 deg around the bars, while the base can be rotated 360 deg in relation to the clamp. It can be mounted on the left or right side, above or below the bars, and angled however feels comfortable. - Infinite adjustability and versatility with multiple mounting configurations, providing endless options for fit and ergonomics. The design is ideal for cockpits with a lockout lever, e-bikes with left controls, any mountain bike with 22.2mm handlebars that may not allow a dropper lever mounted in the standard position, or anyone who wants an alternative to a standard dropper lever - 22.2mm clamp and barrel adjuster like other dropper levers. It gets its unique adjustability from the joystick-style lever and base that can be rotated in relation to the clamp - The lever pulls up to 8mm of cable while a hardened stainless steel bushing provides precise actuation from any angle - The ReMote 360 lever can be pushed or pulled in any direction to actuate your dropper post. Push it with your thumb as you would with a standard dropper lever, pull it toward your handlebars with your index finger, or move it in any other way that works for your cockpit
$119.00
Enduro Zero Pulley Assemblies use grade 5 ceramic bearings. Races are won and lost by derailleur pulley drag. - VV" type 2-lip non-contact Silicone labyrinth seals - Nylon/graphite retainer
$119.00 $160.00 26% Off
Zipp Stealth Riser Bolt Kit 50mm For Vuka Stealth, Vuka Aero
$94.00 - $117.00
RockShox Rebound Dampers and Seal Head Assemblies
$116.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 36T
$115.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 28mm - Width: 7mm
$111.00
- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC
$110.00
- Accessory base plate to mount EnergyPak Plus on the bike. - EnergyPak Plus accessory comes with a water bottle cage adaptor plate that can be mounted to the base plate when the EnergyPak Plus is not in use.
$11.99 - $109.99
Jagwire Tube Tops cover housing or hydraulic hose to protect a frame’s finish from scratches and keep noise to a minimum. - 5G Tube Tops snap on at any time.
$108.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm
$107.73
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts
$106.00
OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper
$106.00
OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper
$105.00
-Seatpost clamp for Propel Advanced ISP models (2013-2016)
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$104.00
The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
$103.95
Metric fastener kit with an assortment of nuts, bots and washers. - Assortment of commonly used bicycle fasteners
$102.95
Inspired by those long rides when daylight turns to darkness and back to sunlight, the new Ritchey Mini Sliver clip-on bar offers welcome comfort and a more efficient position. These clip-on bar extensions and pads were designed specifically for off- and on-road ultra-endurance racing and riding. The Mini Sliver features a smaller version of our original padded Sliver clip-on armrests, allowing for less interference with handlebar bags and other accessories. The adjustable alloy bar extensions deliver a comfortable and aero position for successful long-distance gravel racing and pleasant extended bike touring. - Includes two sets of armrest pads - Reversible extensions: 70 or 90mm - Built specifically for ultra-distance riding - Material: aluminum 6061 - Handlebar clamp diameter: 31.8mm - Handlebar clamp width: 16mm - Stack height: 31mm - Reversible and replaceable extensions - Replaceable stick-on pads - Weight: 286g
$102.78
Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.
$100.00
Salsa Pivot Service Kits
$100.00
Salsa Split Pivot Suspension Service Kits, for all 2014+ Horsethief, Pony Rustler, Spearfish, Redpoint and Deadwood Sus frames.
$100.00
Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.
$36.95 - $100.00 $95.00 - $100.00 Up to 61% Off
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).
$99.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$99.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$99.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$99.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
$99.99
Constructed from carbon fiber for ultimate weight savings, our pad holders are left- and right-specific. - Lightweight design - Carbon fiber
$99.95
ReMote Sustain Levers provide clean actuation to adjust your post for preferred riding style, whether enduro, XC, downhill, or gravel. - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs
$99.95
ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs
$99.95
ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs
$99.95
ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs
$99.95
ReMote Sustain Lever - Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Only compatible with Reverb Stealths - Features a leak-proof, robust, and low-maintenance mechanical actuation system - Easy cable detachment for service, travel or bike shipping - 40mm reduction in in-frame height compared to Connectamajig Reverbs
$99.60
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles
$99.44 $113.00 12% Off
7.5mm, 10mm, 25-35mm (used for Reverb service) - Reverb AXS/Reverb A1-B1/Reverb Stealth A2-C1
$99.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 8mm - Outer Diameter: 22mm - Width: 7mm
$99.00
RockShox Sektor DebonAir Assemblies - Includes air top cap, Air spring and shaft bolt
$99.00
RockShox Sektor DebonAir Assemblies - Includes air top cap, Air spring and shaft bolt
$97.00
Paul's dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. - Dual stacked sealed cartridge bearings in the pivot for zero slop and long (serviceable) life - Pinch bolt and cable head recess allowing you to run the cable in either direction - Hinged clamp so you can install it without removing the grip - Barrel adjuster for fine tuning the cable tension
$97.00
RockShox Motion Control IS Compression Dampers
$95.00
ELEVENSIX coils are precision manufactured at HyperCo's state-of-the-art USA facility and available in 25lb/in increments for uncompromising setup. Each HyperCoil suspension spring is individually inspected, and laser marked with size and rate information for the ultimate in accuracy!
$95.00
ELEVENSIX coils are precision manufactured at HyperCo's state-of-the-art USA facility and available in 25lb/in increments for uncompromising setup. Each HyperCoil suspension spring is individually inspected, and laser marked with size and rate information for the ultimate in accuracy!
$95.00
ELEVENSIX coils are precision manufactured at HyperCo's state-of-the-art USA facility and available in 25lb/in increments for uncompromising setup. Each HyperCoil suspension spring is individually inspected, and laser marked with size and rate information for the ultimate in accuracy!
$95.00
ELEVENSIX coils are precision manufactured at HyperCo's state-of-the-art USA facility and available in 25lb/in increments for uncompromising setup. Each HyperCoil suspension spring is individually inspected, and laser marked with size and rate information for the ultimate in accuracy!
$95.00
The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs. - Ultra-fine spring rates to ensure perfect set up for all weights. - Spring rates are broken down to 4 N/mm (23 lbs./in). - Fits Ohlins TTX shock absorber for Stumpjumper FSR only. - Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.
$36.95 - $95.00 $95.00 Up to 61% Off
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).
$94.99
• Converts a cassette hub to a single speed • 8 spacers included in various sizes to adjust chain line • Anodized 6061 aluminum • Fits Shimano/SRAM cassette bodies • Conical spacers for increased cog stiffness • Includes single-speed guide, spacers, as well as 18T & 16T cogs
$94.57
Replacement lever blades for Magura disc brakes