Other

Replacement lever blades for Magura disc brakes

Minimalist double butted aluminum extensions designed for draft legal Triathlons (ITU and UCI approved) Composite adjustable armrests, a one piece composite aero bridge and molded armrest pads

RockShox Boxxer Solo Air Assembly

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss EXP 54 Tooth Upgrade Kit w/ Bearing

The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is constructed using carbon fiber, allowing for even more complex shaping and lighter weight. - Compatible with all 22.2mm clip-on systems - Material: Unidirectional carbon - Internal cable routing - Length: 380mm

RockShox Motion Control Compression Dampers

Shop kit of bearing retainers for loose-ball headsets, hubs and bottom brackets. - Bottom bracket: 1/4x9=12; 5/16x9=16 (#64); 5/16x10=16 (#66), 5/16 x 12 (Qty 4) - Bearing retainer assortment in all the popular sizes for headsets, hubs, and bottom brackets; includes plastic organizer - Hubs: 3/16x7=8; 1/4x7=16 - Headset: 5/32x22=8; 5/32x16=8; 3/16x16=8; 5/32x20=24

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

Complete assemblies of remotes, hoses and fittings for Reverb and Reverb Stealth.

- Includes barb and olive - Brake Lever Clamp: 22.2mm, MMX compatible - Lever Blade Material: Carbon - Reach Adjust: Tool-free

Adjustable spring rate coil that's also progressive. Sprindex is specifically designed to have a progressive spring rate for the last 20% of stroke for big hit support and for bikes with a linear linkage design. - Adjustable spring rate - Adapters included for different size shocks and set ups - Made of super high tensile spring steel

Replacement lever blades for Magura disc brakes

Paul's dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. - Dual stacked sealed cartridge bearings in the pivot for zero slop and long (serviceable) life - Pinch bolt and cable head recess allowing you to run the cable in either direction - Hinged clamp so you can install it without removing the grip - Barrel adjuster for fine tuning the cable tension

The bracket is forged to create a sleek low stack design. It offers significantly lower stack than the rest of the Sonic range while retaining the extension reach and width adjustment options. It is compatible with a 31.8mm basebar, our riser kits, and 22.2mm extensions in aluminum and carbon. - Materials: Forged 6061-T6 AL - Stack Height: 23.5mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 352g

Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

Paul Components Melvin Chain Tensioner. Converts frames for single speed use. Long enough for a Dingle-setup, (2 rings, one cog) 20T max. - The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap - Will work with multiple front chain rings while maintaining proper chain tension - The pulleys are made of extruded and machined aluminum and have sealed bearings for durability - Pulleys are 2.25mm thick at the tooth which fits inside most narrow 6 through 9 speed chains, and the pulley cage is wide enough to allow 1/8? single speed chains as well - Long enough for a Dingle-setup, (2 rings, one cog) 20T max - Do not use with a coaster brake or fixed gear - Includes Paul's own Sealed Bearing Pulleys

The ProRate Spring is designed to fit both Jade and Jade X rear shock models, offering the longest spring life of any lightweight steel spring on the market. - Up to 125lbs. of progressive rate coil; great for big-hit support, aggressive riders or linear linkage designs - Lightweight and high-quality Japanese steel - Retains spring-rate up to 1,000,000 compressions

The ProRate Spring is designed to fit both Jade and Jade X rear shock models, offering the longest spring life of any lightweight steel spring on the market. - Up to 125lbs. of progressive rate coil; great for big-hit support, aggressive riders or linear linkage designs - Lightweight and high-quality Japanese steel - Retains spring-rate up to 1,000,000 compressions

The ProRate Spring is designed to fit both Jade and Jade X rear shock models, offering the longest spring life of any lightweight steel spring on the market. - Up to 125lbs. of progressive rate coil; great for big-hit support, aggressive riders or linear linkage designs - Lightweight and high-quality Japanese steel - Retains spring-rate up to 1,000,000 compressions

38 Air Shaft Assembly for Fox suspension forks.

Have a current Bomber Z1 but missing that Coil Spring feel? Or, maybe you have a Bomber Z1 Coil already and want to customize its ride. Look no further. With this conversion kit, you can now convert your Bomber Z1 air fork easily to the Z1 Coil. Buy this upgrade kit and follow the install instructions (or have your bike shop swap it out for you) and you, too, will be riding the buttery-smooth Z1 Coil in no time. NOTE: To do the conversion, you will also need to purchase the Bomber Z1 Coil Conversion Spring

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss EXP 54 Tooth Upgrade Kit

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

RockShox Rebound Dampers and Seal Head Assemblies

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 30mm - Width: 7mm

Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

- Internal junction-A with two e-Tube ports - Externally facing charging port eases charging, especially for internal batteries - Mounts in road bar end or in frames with an integrated mounting point - For easier cable routing, use along with EW-JC130 three-way e-Tube cable

Giant's Connect SL Ski-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the ski-jump bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 28mm - Width: 7mm

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 26mm - Width: 5mm

The ReMote 360 is a joystick-style dropper lever that can be installed almost anywhere on the handlebars. It is compatible with all cable-actuated dropper posts. The lever can be pushed or pulled in any direction with a thumb or index finger. The clamp can be rotated 360 deg around the bars, while the base can be rotated 360 deg in relation to the clamp. It can be mounted on the left or right side, above or below the bars, and angled however feels comfortable. - Infinite adjustability and versatility with multiple mounting configurations, providing endless options for fit and ergonomics. The design is ideal for cockpits with a lockout lever, e-bikes with left controls, any mountain bike with 22.2mm handlebars that may not allow a dropper lever mounted in the standard position, or anyone who wants an alternative to a standard dropper lever - 22.2mm clamp and barrel adjuster like other dropper levers. It gets its unique adjustability from the joystick-style lever and base that can be rotated in relation to the clamp - The lever pulls up to 8mm of cable while a hardened stainless steel bushing provides precise actuation from any angle - The ReMote 360 lever can be pushed or pulled in any direction to actuate your dropper post. Push it with your thumb as you would with a standard dropper lever, pull it toward your handlebars with your index finger, or move it in any other way that works for your cockpit

Enduro Zero Pulley Assemblies use grade 5 ceramic bearings. Races are won and lost by derailleur pulley drag. - VV" type 2-lip non-contact Silicone labyrinth seals - Nylon/graphite retainer

Zipp Stealth Riser Bolt Kit 50mm For Vuka Stealth, Vuka Aero

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 36T

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 28mm - Width: 7mm

- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC

Jagwire Tube Tops cover housing or hydraulic hose to protect a frame’s finish from scratches and keep noise to a minimum. - 5G Tube Tops snap on at any time.

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 12mm - Outer Diameter: 24mm - Width: 6mm

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

-Seatpost clamp for Propel Advanced ISP models (2013-2016)

The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.