Other

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits the following Santa Cruz bikes: - 5010 V1, V2, V3 - Bronson V1, V2, V3 - Nomad V2.1, V3, V4 - Chameleon V5, V6, V7 - Heckler V7 - Heckler E-Bike V8 - Heckler MX E-Bike - Bantam V1 - Blur TR V1.1 - Blur XC V2.2 - Blur LT V2.2, V2.1c - Blur V3 - Highball V1, V2, V3 - Tallboy LT V1.1 - Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only) - High Tower V1 and V2(MY20 & MY21 only) - High Tower LT V1 - Mega Tower V1 - And Juliana Equivalents Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.

- From a long line of tough, light-weight chain engineering from SRAM - Coupling for 12-speed Sram Eagle chains - Chain connector type: PowerLock - Compatible with Sram Eagle SX, Eagle NX, Eagle GX, Eagle X01, Eagle XX1 models - No tools necessary to install - Color: RAINBOW - 50 Pack

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector

Description This Müve Fit Bike accessory allows for quick and easy saddle changes, as well as fine-tuning of the saddle angle. - Internal side clamping cups with centering springs for easy saddle load and unload - Side cups rotate to accommodate standard 7mm cylindrical rails and 7x9mm carbon rails - Single 5mm hex bolt allows for quick clamping and pressure control - Angle lock nut secures desired saddle angle - 10-degree (+/-) saddle tilt range - No tools needed for tilt adjustment

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Service parts for Fox suspension.

Hope Brake Lever Parts

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Cane Creek 1-1/8" Headset Shim Spacer .50mm from Cane Creek.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Replacement piston and seals for Hope disc brake calipers.

1/2" X 1/8" -Pin Length: 9.2 mm

Color: Black Width: 9.4 Reusable: Yes Drivetrain Speeds: 1

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Dia-Compe Star Nut for 1 1/8" Steerer (28.6mm)

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

• Designed to keep dust and dirt out of V-Brake cable/housing systems

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Routes cables underneath the bottom bracket - Will not rust or corrode

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Type: Lock washer - Size: 1" Keyed