Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Riser

$157.99
Burgtec's first range of signature handlebars developed with, yes you've guessed it! Josh Bryceland.
Josh loved the sweep and rise of the Ride Wide Bars but asked us to make him something a bit higher. The Rat isn't one of those guys that's 'crazy' on setup, but he knows what he wants.
- 38MM RISE:
Back in 2018 Josh's idea was for something more versatile that he could use on all his bikes. After testing various prototypes, he finally narrowed it down to a 38mm rise bar, the perfect sweet spot. The first material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy.
So, the 38mm "Ride High" was born. The same unsurpassed comfort and durability as all of the Ride Wide range, but just a little Higher.
- 50MM RISE:
It's fair to say high rise bars have taken a back seat over the last decade much in part to the increasing wheel sizes pushing up front ends of bikes and riders trying to match their previous riding positions.
After first coming to us a little over 3 years ago and deciding on the 38mm rise bar Josh wanted to quite literally raise the bar once again.
We'd previously prototyped the 50mm bar alongside the 38s but at the time just felt they looked out of place. With more riders moving towards 29ers we felt the market just wasn't ready for them.
Josh quickly adapted to the 38s but still felt he was running a lot of stack on his bikes. So with more frequency, he was popping in to Burgtec HQ asking if we had any of the 50mm rise bars left.
In the end, we ran out of prototype bars, and Rats a very persuasive guy so we just decided to go into production with the 50s.
For Josh, he loves how the higher rise allows for more maneuverability as well as getting rid of the excess stack height.
Plus, being a taller rider, they keep his weight where he wants it and freely admits "It's easier on my back".
The bars are a natural fit for Jump bikes but as Josh and the boys show they are equally at home on bigger travel trail bikes too.
- Width: 800mm
- Rise: 38mm, 50mm
- Available in 35mm clamp only.
- Backsweep: 9°
- Upsweep: 5°
- Weight: 38mm Rise = 346g, 50mm Rise = 391g

Big, burly and bad! DH strength without the weight.
- Unidirectional carbon weave
- Up to 25% lighter than aluminum counterparts
- Stiff with excellent vibration damping for those long descents
35mm clamp
- Extensively tested and proven design, carbon bars you can trust
15mm, 25mm and 35mm rise options

$89.10
$99.00
10% Off
The FU40 Hi-Rise handlebar features a specific wall profile optimized for the additional length and torque that corresponds to its shape. Made from premium quality 7000 series alloy for the best strength to weight ratio, the FU40 is ideal for freeride mountain biking.
- Custom drawn 7000 series alloy
- Intended use: Trail to DH
Material: Alloy
Width: 800mm
Upsweep: 5mm
Back Sweep (deg): 8mm
Bar Clamp Diameter (mm): 31.8mm
Rise: 40mm
Weight: 330g

$89.10 - $99.00
$99.00
Up to 10% Off
- The original Chromag bar
- Used from XC to DH, the OSX is Chromag's most versatile option
- 31.8mm clamp
Specs:
- Rise: 25mm
- Handlebar Width: 800mm
- Stem Clamp Diameter: 31.8mm
- Handlebar Material: Aluminum
- Upsweep: 5 degrees
- Backsweep: 8 degrees

$94.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

$98.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

$189.00 - $210.00
$210.00
Up to 10% Off
- Unidirectional carbon fiber riser bar with 35mm stem clamp area
- Downhill strength with 25% weight savings compared to aluminum

$189.00 - $210.00
$210.00
Up to 10% Off
All Mountain / XC The Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 780mm. 220g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features a 25mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. The geometry of this bar now matches our OSX perfectly.

$19.99
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes.
- Four rise options available from 30-100mm
- AL-6061 aluminum alloy
- ISO4210 Safety Tested for City/Trekking use
- Not recommended for use with bar-ends or clip-on aero bars
- 15-degree sweep

$25.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards.
- Shot-peened finish
- 6061-T6 Aluminum
- 9-deg backsweep
- 720mm wide
- 35mm rise

$170.00 - $190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm

$190.00
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine.
- Material: Carbon
- Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise)
- Bar Width (Max): 800mm
- Bar Width (Min): 780mm
- Clamp Diameter: 35mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm

$190.00
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep.
- Material: Carbon
- Weight: 245g (30mm rise); 265g (50mm rise)
- Bar Width (Max): 810mm
- Bar Width (Min): 780mm
- Clamp Diameter: 31.8mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm

$26.99
Original equipment specifications.
- 25.4mm clamping diameter
- Sandblasted silver finish
- 27 degree backsweep

$31.99
Grab life by the handlebars.
- Original equipment replacement for Townie Original bikes
- 6061 alloy with an anodized finish

$99.99
- Low-profile integrated handlebar-basket
- Compatible with 31.8mm or 25.4mm stems
- 6061 aluminum
- Cargo surface: 230 x 335mm (9 x 13.1-inch)
- Handlebar width: 650mm
- Max Weight 10kg/22lbs
- Comfortable 30-degree sweep

$42.00
Budget-friendly mountain bars with stylish flair.
- Plain gauge, tapered and shot-peened AL6061/T6
- Shot-peened for surface hardness
- 15mm rise
- 9° backsweep, 4° upsweep
- Bar Clamp Diameter: 31.8mm
- Material: Alloy
- Width: 740mm

$123.10
The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind.
- UD carbon and AL6066 material
- Carbon Structural Integration (CSI)
- Textured stem clamp zone
- 18mm rise
- 9° backsweep, 4° upsweep
- UD carbon finish

$49.99
The MX Handlebar offers a comfortable way to customize your bike with a bit of BMX style. The low-rise chromoly handlebar is a perfect upgrade to a Weekender Archer bike, for example. Or, put them on any bike in need of some tough chromed chromoly steel!
- 7/8" (22.2mm) BMX style clamp (so you'll need a BMX stem to use them)
- 4” rise
- 28” width

$85.00
An ultra-lightweight 7050 aluminum trail riser bar designed for maximum singletrack shredding.
- Lightweight, optimized 7075 aluminum alloy
- Micro-adjust laser-etched setup markings
- 35mm handlebar diameter
- 9 degree rearward/ 5 degree upward sweep
- 20mm rise

$79.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar.
- 41-Thermal processed 4130 chromoly
- Multi-butted

$79.99
Odyssey Shortcut BMX Handlebar
- Butted 20mm crossbar
- 1.8/1.3mm thick, multi-butted main tubing
- Large radius bends for greater durability
- Post-weld heat-treated for added strength

$89.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability.
- Multi-Butted, traditional 7/8" crossbar for strength
- Large radius bends for greater durability
- Welded end caps to reduce flex
- Post-weld heat-treated for added strength
Page 1 of 5
Next page