Thomson's Trail bar is 750mm wide with 20mm of rise. The clamping area is 50mm wide, allowing a different bend profile for a more compliant ride. The Trail bar is designed to give you a lightweight aluminum all-around bar no matter your riding style. - Backsweep: 8° - Upsweep: 5° - Material: Aluminum
$189.00 - $210.00 $210.00 Up to 10% Off
- Unidirectional carbon fiber riser bar with 35mm stem clamp area - Downhill strength with 25% weight savings compared to aluminum
Thomson's strength combined with all day comfort Toray carbon with a unique nano epoxy resin for high impact resistance 1.5k woven impact ends help prevent damage from shortening and ground impacts
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position and the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
Fast, Light, and Agile. SQlab ergonomics experts are not only quite impressive in just ergonomics, but also very well versed in high-tech, material science and carbon manufacturing. Ergonomics: With an aggressive sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for aggressive MTB handlebars. Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study, we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. Stability: SQlab is one of only two manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Area of use: MTB Race - The 12° backsweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain - The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - This bar utilizes a 31.8mm clamping area. If you have a 35mm stem, please refer to our shim kit.
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
Light and compliant for incredible durability and a supple, refined ride, the Ritchey WCS Carbon Rizer Handlebar is the choice for XC riders looking for a high-end carbon bar that's built for performance. The WCS Carbon Rizer features our proven WCS carbon technology, a textured stem clamp area to reduce risk of bar slippage, and is reinforced internally to accept bar ends and shifter/lever clamps. - Carbon monocoque - 30mm rise - 9 degree sweep - Width: 710 and 740mm (710mm USA only) - 31.8mm center section - Matte UD carbon finish - Weight: 180g
- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
Origin-8's Urban MX Riser Handlebar is made from lightweight, durable 6061 aluminum. It provides a 60mm rise and a narrow 560mm width. A large grip surface leaves you plenty of room to move your hands or mount necessities like lights, bells, and computers.
$28.89 - $33.99
Origin-8's Pro Urban Riser Handlebar is a wonderful city companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.
- Low-profile integrated handlebar-basket - Compatible with 31.8mm or 25.4mm stems - 6061 aluminum - Cargo surface: 230 x 335mm (9 x 13.1-inch) - Handlebar width: 650mm - Max Weight 10kg/22lbs - Comfortable 30-degree sweep
$176.95 - $203.45 $176.95 - $219.95 Up to 16% Off
An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks
$46.00 - $50.00 $50.00 Up to 8% Off
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
- Economical 6066 aluminum alloy mountain handlebar - 800mm width - 3 rise options - Back sweep: 7° - 310-350g (Depending on rise dimension)
$44.94 - $69.99 $69.99 Up to 36% Off
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
$29.94 $41.99 29% Off
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos
$57.94 - $89.99 $79.99 - $89.99 Up to 28% Off
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
$149.94 $179.99 17% Off
XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.
$44.94 - $54.94 $79.99 Up to 44% Off
A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike
An ultra-lightweight 7050 aluminum trail riser bar designed for maximum singletrack shredding. - Lightweight, optimized 7075 aluminum alloy - Micro-adjust laser-etched setup markings - 35mm handlebar diameter - 9 degree rearward/ 5 degree upward sweep - 20mm rise
$27.99 - $36.99
Lightweight aluminum construction with a versatile riser bar design.
$118.99 - $125.99 $169.99 - $179.99 30% Off
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
The perfect combination of form, wall thickness and diameter with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position, while the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter
$189.00 - $210.00 $210.00 Up to 10% Off
All Mountain / XC The Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 780mm. 220g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features a 25mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. The geometry of this bar now matches our OSX perfectly.
$64.94 - $73.59 $91.99 Up to 29% Off
- Lightweight 780mm wide handlebar for Trail or All Mountain riding - Big and burly 35mm barclamp - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g - Diameter (mm): 35 - Rise (mm): 25 - Length (mm): 780 (adjustable to 740) - Geometry (deg°): 5° up x 8° back - Finish: Shot peen anodized
$55.99 - $62.99 $79.99 - $89.99 30% Off
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color