Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Handlebars

$299.94 - $319.94 $352.00 Up to 15% Off
The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. - Updated distinctive Zipp cosmetics - 70mm reach and 128mm drop allows for a low and aero drops position - Internal cable routing is easy with Rapid Route - Lifetime warranty
$100.30 - $118.00 $118.00 Up to 15% Off
The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with the short reach to control levers vital for race situations. The bar's 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Lifetime warranty
$235.00
Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g
$78.00
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
$158.00
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$158.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$280.00
Whisky's all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar's flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories, including aero bars. - Available in five widths, measured center-to-center at the hoods: 40, 42, 44, 46, 48cm - Compound flare — 12 degrees at the hoods and 20 degrees through the drops - Drop/Reach: 100mm/68mm - 31.8mm clamp diameter Specifications: - Bar Top Style: Flat - Width Measurement: Center - Bar Clamp Diameter (mm): 31.8 - Accessory Mount Diameter: 31.8 - Bar Reach (mm): 68 - Material: Carbon - Clip-on Compatible: Yes - Bar Drop (mm): 100 - Flare: 20 - Defined Color: Black - Weight: 236 - Drop Bend Style: Compact
$200.00
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds. - Compatible with road, mountain, and bar-end controls - Tested to ASTM 3 - 90mm clamping area to fit Salsa Anything Cradle - Can be ridden in up or down position - Unidirectional carbon fiber construction - Weight: 250g
$21.99
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 726g - Lever Compatibility: Mountain 22.2mm
$184.95
- Thomson's strength combined with all day comfort - Toray carbon with a unique nano epoxy resin for high impact resistance - 1.5k woven impact ends help prevent damage from shortening and ground impacts Thomson Trail 35mm Carbon Riser Bars 800mm x 10mm Rise x 35.0 Clamp (Carbon)
$123.95
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
$129.95 - $134.95
Thomson MTB Aluminum Handlebar 800mm 35mm Rise 9degree back 5 degree up 35.0 clamp. - Produced from 7050 alloy then butted and tapered for optimal fatigue life - Produced with an advanced hydraulic forming press to ensure consistent wall thickness and exact tolerances - Bar Clamp Diameter: 35.0mm
$179.95
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
$184.95
Thomson's strength combined with all day comfort Toray carbon with a unique nano epoxy resin for high impact resistance 1.5k woven impact ends help prevent damage from shortening and ground impacts
$549.99
The Syncros Creston iC is the ultimate in terms of integration on the road. Clean and uncluttered our new Syncros combo cockpit allows us to route all the cables completely internally through the bar, headset and into the frame as part of SCOTT’s new ICC routing. - Carbon UD, Superlight Layup - Compact Bend 75mm/125mm Reach/Drop - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/4" for Scott Addict RC MY20 - Weight: 280g
$499.99
The DC Fraser features our integrated bar and stem concept, which now also allows for the integration of cables on the front of the bike. It comes with an updated cable holder solution with push pin zip ties. The ultralight result is optimized here for DC or Down-Country riding with a range of stem lengths to suit every shape and size of rider. Our DC Frasers have a neutral stack height across the range of stem lengths. A variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera. - RANGE OF USE: MTB - MATERIAL: Carbon UD, Superlight Layup - UP SWEEP: 6° up - BACK SWEEP: 8° back - RISE: 8mm Mini Rise - ANGLE: 0° - CLAMP DIAMETER: iC (integrated Cockpit) - STEERER DIAMETER: 1 1/8" - LENGTH: 40mm, 50mm, 60mm, 70mm - WEIGHT: 290g FEATURES: - XC World Cup level integrated carbon bar & stem - One-piece construction - Textured grip/lever area - Integrated stem 0° - Flat T-Bar shape - Width: 760mm - Syncros Engineered Carbon Construction
$399.99
The bar of choice of Nino Schurter and Lars Forster of the SCOTT-SRAM team, the Fraser features our integrated bar and stem concept, now also allowing for the integration of cables on the front of the bike. Extensive testing allowed us to pinpoint ideal reach, drop, and sweep for Nino and Lars, allowing them to get a super-low and fast position matched perfectly to what they need to race at the highest level at the World Cup. This -40 degreee stem angle might not be for everyone but works for them. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
$70.00 $73.00 4% Off
The Surly Truck Stop Handlebar combines the benefits of a drop bar with those of a riser bar. Offering a variety of hand positions for comfort over the long haul, it also features 30mm of rise for a more upright and relaxed riding position. With a clean aesthetic, it’s a great option for taller riders looking for more rise and for bikes with a low-cut steer tube. - Lightweight, aluminum construction - Available in various widths - 31.8mm clamp diameter
$36.99
Lightweight aluminum construction with a versatile riser bar design.
$13.99
• Sturdy, chrome-plated steel construction • Back sweep: 6 degrees
$5.00
Specialized Venge Stem & Aerofly 2 Cable Transition Kit Model year 2019
$91.99
- Lightweight 780mm wide handlebar for Trail or All Mountain riding - Big and burly 35mm barclamp - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g - Diameter (mm): 35 - Rise (mm): 25 - Length (mm): 780 (adjustable to 740) - Geometry (deg°): 5° up x 8° back - Finish: Shot peen anodized
$79.99 - $89.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
$114.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos
$79.99
A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike
$69.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
$41.99
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos
$80.00 - $84.00
The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 7050-T6 series aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 281g (44cm)
$75.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 7050-T6 series aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 330g - Note: Rustler bars are not compatible with bar ends
$339.99
Fast, Light, and Agile. SQlab ergonomics experts are not only quite impressive in just ergonomics, but also very well versed in high-tech, material science and carbon manufacturing. Ergonomics: With an aggressive sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for aggressive MTB handlebars. Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study, we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. Stability: SQlab is one of only two manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Area of use: MTB Race - The 12° backsweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain - The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - This bar utilizes a 31.8mm clamping area. If you have a 35mm stem, please refer to our shim kit.
$319.99
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position and the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter
$69.99
For some people, "BIG"� is not big enough. So we took our Big Honkin' cruise bars and made them "SUPER�" big! With a 31.5� width, 7� rise, and unique shape and bends, there are no other bars on the market quite like the Super Big Honkin' bars. Key Features: 4130 Cr-Mo construction Knurled 22.2mm stem clamp area Tig-welded cross bar 10° back sweep, 1° up sweep 31" wide x 7" rise 38oz
$300.00
Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach
$170.00
DH tough and XC light, the Traverse SL 35 is our handlebar premiere, and capitalizes on our decades of carbon fiber experience to deliver precise control and exceptional comfort, along with class leading strength to weight performance. Handlebars have grown wider in recent years, and this has presented some interesting challenges. Because bars are wider, leverage stress exerted at the stem has risen dramatically. The Traverse SL features a 35mm diameter at the stem clamp; this increases strength in this crucial zone, while also dissipating the bar clamp load across a larger surface area. More secure clamping, and a stronger handlebar - these are good things. Meanwhile, our extensive experience with carbon fiber allows us to ensure maximum strength at the clamp and then tailor the carbon fiber layup to providing damping at the bar-ends, resulting in a more comfortable, less fatiguing ride. The Traverse SL 35 is strong enough to attack the gnarliest terrain, durable and comfortable enough to hammer the chunder day in, day out, and light enough to make XC racers smile. - Backsweep: 8 degrees - Clamp: 35mm - Rise: 30mm - Upsweep: 6 degrees - Weight: 227 grams
$54.95
The ergonomic evolution of Ritchey handlebars continues with the ground-breaking Comp Beacon. The most notable feature is its super-wide 36° drop flare. Aside from the unmatched ergonomic comfort and stability afforded by this wide flare, it also allows for plenty of space for handlebar packs. When riding in the drops, the Beacon doubles down on comfort with a very shallow 80mm drop and a shorter than usual reach. The Evo-style top section offers broad support for your hands, and it has a gentle backward sweep for a more natural hand position when riding the tops. The unconventional aesthetic of the Comp Beacon belies its comfort and practicality. Taking inspiration from the randonneur world, the Beacon allows an easy transition of the hands around the bar without upsetting bike handling when loaded with gear. The gentle change of hand position allows the body to stretch and move while keeping the bike stable. Ideal for adventure touring and bikepacking, on asphalt or gravel trails—or even for urban riding—the unique Comp Beacon brings a whole new level of comfort and control. - Material: double-butted 6061 alloy - Bend style: bio-bend - Top style: ergonomic - Width: 400, 420, 440, 460mm - Drop: 80mm - Reach: 65mm - Drop flare: 36° - Flare out: 6° - Backsweep: 4.5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 300g (420mm)
$54.95
For riders looking for the perfect fit or a little more comfort miles into a gravel ride, the ErgoMax features an anatomical shallow drop mated with 25mm of rise for an unsurpassed ride quality - Bar Clamp Diameter: 31.8mm - Bar Drop: 128mm - Bar Reach: 73mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Compact - Cable Routing: External - Material: Aluminum - Clip-on Compatible: Yes - Flare: 4.6
$54.95
The evolution of Ritchey handlebars continues with the Comp ErgoMax. This new bar enjoys a rich history of handlebar design and development and combines it with the modern demands of discerning riders who enjoy riding varying surfaces. Designed to enhance control and comfort when riding along loose surfaces, the ErgoMax is ideal for a gravel bike since it places the hands in a wider, more stable position while in the drops. The ErgoMax is just as perfectly situated on road bikes that are built for endurance, its ergonomics delivering unparalleled comfort. The bar tops employ a 10mm rise at the clamping area, which offers a slightly more upright riding position. They are then ovalized and have a slight 4-degree rearward sweep to more evenly distribute the weight of the rider's hands and wrists, also putting them in a more natural position. Continuing with an eye towards ergonomics, the ErgoMax also features drops with a nice 12-degree flare to keep the rider's hands in a comfortable and confident position, while also adding a bit more unobstructed stability when turning or sprinting. The new Ritchey ErgoMax bar delivers more control, welcome comfort, and increased confidence when riding gravel, setting out on multi-day adventures, or rolling along those long miles of tarmac. - Material: double-butted 6061 alloy - Bend style: compact - Top style: flat - Width: 400, 420, 440, 460mm - Drop: 128mm - Reach: 73mm - Drop flare: 12° - Flare out: 3° - Backsweep: 5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: no - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing - Weight: 320g (420mm)
$54.95
Tom Ritchey has been riding off-road and riding far – and designing products for such adventures - decades before anyone thought to call it “gravel riding” or “bikepacking.” His real-life experiences directly inform every product made by Ritchey – such as the beloved VentureMax handlebar. With its short reach, shallow drop and purposeful flare, the original VentureMax offers comfort and confidence to legions of riders looking to settle in and have some fun on those dirty drop bar adventures. Like its predecessor, the new generation Comp VentureMax is influenced by those life experiences, but some adds new features – continuing to inspire riders to chase gravel and other mixed surface adventures. Aero-shaped 38x22.5mm ergonomic tops offer a more comfortable hand position, while drilling for a Shimano EW-RS910 junction box expands the adaptability of the WCS VentureMax. Multiple hand positions are key for comfort and confidence on any ride, and the WCS VentureMax offers plenty of options there – especially with its wide 24-degree flare at the drops. But it’s the return of the Bio-bend in the drop that adds yet another design element that is practical and comfortable for whatever surface you choose to ride upon and for however long your adventure endures. The flattened 38x22.5mm top section provides a comfortable area for resting hands Compatible with Shimano EW-RS910 junction box Width is measured at the initial bend rather than at the hood
$54.95
Tom Ritchey has been riding off-road and riding far—and designing products for such adventures—decades before anyone thought to call it "gravel riding" or "bikepacking." His real-life experiences directly inform every product made by Ritchey—such as the beloved VentureMax handlebar. With its short reach, shallow drop, and purposeful flare, the original VentureMax offers comfort and confidence to legions of riders looking to settle in and have some fun on those dirty drop bar adventures. Bikepacking adventures demand components that deliver unmatched comfort, practical features, and logical design. Taking the idea of the original Comp VentureMax to the next level, or rather width, the Comp VentureMax XL features all of the goodness of the original bar but widens it way up to a full 52cm. Appealing especially to the bikepacking community, the Comp VentureMax XL offers ergonomic tops for a more comfortable hand position, and the wider grip ensures more off-road control and stability when fully-loaded. Plus, there is plenty of real estate on either side of the stem for mounting accessories and bags. Additionally, the Comp VentureMax XL also features a 4.6° back sweep, aero-shaped 38x22.5mm tops, and drilling for a Shimano EW-RS910 junction box. While the 52cm Comp VentureMax XL boasts a number of attributes including multiple hand positions, it's the return of the Bio-bend in the drop adds yet another design element that is practical and comfortable for whatever surface you choose to ride upon and for however long your adventure endures. - Broad, 52cm width offers plenty of space for mounting accessories and bags - The flattened 38x22.5mm top section provides a comfortable area for resting hands - Width is measured at the initial bend rather than at the hood - Material: double-butted 6061 alloy - Bend style: bio-bend - Top style: ergonomic - Width: 520mm - Drop: 102mm - Reach: 75mm - Drop flare: 24-degree - Flare out: 6-degree - Back sweep: 4.6-degree - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 350g
$39.95
An adventure bar from Ritchey. Extra wide with subtle rise and sweep, these bars are perfect for handling dodgy terrain while packing a week's worth of supplies. - 6061 alloy - Bar Clamp Diameter: 31.8mm - Width: 800mm - Rise: 30mm - Back Sweep: 27 degrees - Upsweep: 27 - Weight: 355g
$44.95
An updated version of a Ritchey handlebar bend now in a timeless high-polish silver finish. The NeoClassic features the traditional round drops that many Tour de France and Classics champions prefer with a shorter reach and shallower drop. - Material: double-butted 6061 alloy - Bend style: traditional - Top style: round - Width: 400, 420, 440mm - Drop: 128mm - Reach: 73mm - Drop flare: 0° - Flare out: 0° - Backsweep: 0° - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 300g (420mm)
$109.95
The ergonomic evolution of Ritchey handlebars continues with the ground-breaking WCS Beacon. The most notable feature is its super-wide 36° drop flare. Aside from the unmatched ergonomic comfort and stability afforded by this wide flare, it also allows for plenty of space for handlebar packs. When riding in the drops, the Beacon doubles down on comfort with a very shallow 80mm drop and a shorter-than-usual reach. The Evo-style top section offers broad support for your hands, and it has a gentle backward sweep for a more natural hand position when riding the tops. The unconventional aesthetic of the WCS Beacon belies its comfort and practicality. Taking inspiration from the randonneur world, the Beacon allows an easy transition of the hands around the bar without upsetting bike handling when loaded with gear. The gentle change of hand position allows the body to stretch and move while keeping the bike stable. Ideal for adventure touring and bikepacking on asphalt or gravel trails—or even for urban riding—the unique WCS Beacon brings a whole new level of comfort and control. - Material: triple-butted 7050 alloy - Bend style: bio-bend - Top style: ergonomic - Drop: 80mm - Reach: 65mm - Drop flare: 36° - Flare out: 6° - Backsweep: 4.5° - Clamp diameter: 31.8mm - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 270g (42cm)
$67.94 - $89.99 $84.99 - $89.99 Up to 20% Off
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
$63.99 - $79.99 $79.99 Up to 20% Off
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
$118.99 - $149.94 $169.99 - $179.99 Up to 30% Off
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
$125.99 - $179.99 $169.99 - $179.99 Up to 30% Off
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
$149.94 $179.99 17% Off
XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.
$139.99 - $147.99 $174.99 - $184.99 20% Off
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control
$139.99 $174.99 20% Off
With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Clamp: 35.0 Width: 820mm Rise: 20mm Color: Orange
$62.99 - $72.24 $79.99 - $89.99 Up to 30% Off
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color
$55.99 $79.99 30% Off
- Butted alloy tube, cold-drawn and shot-peened to increase fatigue resistance - Intended use: XC, Trail and All Mountain - Bar Clamp Diameter: 31.8 mm - Bend: 9 deg - Weight: 290 g
$131.24 $174.99 25% Off
ProTaper aluminium handlebars are classics of the highest quality. From day one, ProTaper has accepted no limits in the development of its handlebars. The ProTaper handlebars have been developed further and further, while one thing has always been the same: the original ProTaper concept - thicker tubes in the clamping area, thinner ones in the less stressed areas. With this concept, ProTaper creates extremely stable handlebars with very low weight year after year. Size: 31.8 x 810 mm Cutting marks allow accurate shortening up to 740 mm width Weight: 190 g
$89.99
- AL7050 tubular alloy construction - 31.8mm clamp diameter - 800mm width - 7° back sweep - ISO-Mountain safety certified - 310-350g (Depending on rise dimension)
$159.50 - $186.99
ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We benchmarked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. SPECS - Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up - Weight: 20mm Rise (220g) 35mm Rise (225g) - Max Stem Clamp Width: 65mm - Max Control Torque: 5Nm - Minimum Trim width: 740mm - Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White COMPATIBILITY - Grips with only an outer clamp are not compatible with our bar.
$79.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar. - 41-Thermal processed 4130 chromoly - Multi-butted
$89.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability. - Multi-Butted, traditional 7/8" crossbar for strength - Large radius bends for greater durability - Welded end caps to reduce flex - Post-weld heat-treated for added strength
$109.99
Broc Raifrod's new signature BROC bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width and slightly less backsweep at 10 degrees. - 41-Thermal Lifetime Warranty - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated
$79.99
Odyssey Shortcut BMX Handlebar - Butted 20mm crossbar - 1.8/1.3mm thick, multi-butted main tubing - Large radius bends for greater durability - Post-weld heat-treated for added strength
$89.99
The Eagle bars are our first ever set of 4-piece bars! Available in multiple heights to fit your preference, all Eagle bars maintain the same width and comfortable sweeps. Made from straight gauge 4130 chromoly steel tubing, combine with our TruTherm post-weld heat treatment process, these bars can take a beating. The dimensions and bends used on the Eagle bars give the classic 4-piece design a modern and updated look. TECH SPECS - Rise: 9-inches and 9.5-inches - Width: 29.5-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: Straight Gauge 4130 Chromoly Steel - Heat Treatment: TruTherm Post Weld Heat Treated - Weight: 37.7oz (9") / 38.5oz (9.5")
$436.00
- D-shaped composite tubing - 6% lighter than Contact SLR Compact handlebar - 10% more "pushing" compliance compared to Contact SLR Compact handlebar for a smoother ride quality - 30% more "pulling" stiffness compared to Contact SLR Compact handlebar for cornering, sprinting, and climbing efficiency - Drop 125mm - Reach: 72mm
Page 1 of 6 Next page