Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Suspension

$84.00
Cane Creek Helm QR D-LOC Thru Axle Color: Black
$899.00 $1,099.99 18% Off
Featuring an updated damper design with new compression and mid valve circuits, a new SKF oil seal head, and Motorex 2.5 weight damper oil. All of these elements work to reduce friction and increase sensitivity. The Limited Edition Helm MKII CHAMELEON is only available in 29-inch wheel | 44mm offset platform with both Air & Coil Spring options available Travel is pre-set at 160mm [Internally adjustable 130 – 160mm] – Bolt-on Helm Fender and Chameleon colour changing decals are included – - Spring - Double-Air system with tunable High volume positive and negative air springs [Air] - Stanchion Diameter - 35mm - Min. Brake Rotor Size - 180mm. *If you are using a Hope Tech brake on a Helm fork, you will need to use a 200mm rotor with appropriate adapter. - Spacing / Offset - "D-Loc" 15mm Bolt-on thru axle 15mm x 110 BOOST spacing / 44mm offset - Max Tire Size - 64mm wide by 749mm tall (29) / 75mm wide by 739mm tall (27.5+)
$1,099.99
The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle
$1,099.99
The Cane Creek Helm MKII Coil Suspension Fork features an upgraded damper design for increased support and control. - Compression and midvalve circuit offer increased support and control - SKF oil seal head cartridge and wiper seals are low friction - Damping features include: high speed compression, low speed compression, low speed rebound - Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), low speed rebound (10 positions), indexed travel adjust system, spring pre-load adjust - Lightweight coil spring - 55 lb Lightweight Coil Spring included from factory
$1,099.99
- Double air spring system with independent positive and negative chambers - Adjustable from 130 to 160mm of travel internally - Redesigned air spring with threadless air seal head for service and travel change ease - Damper: Low speed rebound in addition to high and low speed compression adjustable; with 2.5wt damper oil and 11% lighter viscosity - Air volume adjustment with internal indexed system - Threadless aluminum steerer - 35mm low friction anodized upper tubes with SKF wiper seals - Post mount brake: minimum 180mm rotor with 210mm maximum rotor size - Boost 110: allows for a hub with a wider hub flange that provides the rider with a stiffer wheel for more precise steering - D-Loc 15mm bolt-on thru-axle - 27.5"+: 75mm wide by 739mm tall maximum tire size - 29": 64mm wide by 749mm tall maximum tire size
$1,099.99
The versatility of the Cane Creek HELM continues with the new HELM DJ. The new Cane Creek HELM DJ combines the proven performance, reliability and strength of the HELM MKII's chassis with a new short travel air spring optimized for Dirt Jumps, Dual Slalom and Street riding. Preset at 90mm travel and a 483mm axle to crown to accommodate a 26" wheel without changing the geometry of your dirt jump bicycle.
$1,099.99
In 2019 Cane Creek launched their WS130 down country low travel fork, 4 years later they are paying homage to the WS130 by introducing an extremely limited run of their low travel modular fork, the Works Series Helm. The Works Series Helm is a robust, modular fork that equips riders looking for a fork in the 100-130mm travel range with the confidence to ride through tech or push up climbs. The Works Series Helm is available in 4 travel options: 100mm, 110mm, 120mm and 130mm options. Like Cane Creek’s Helm MKII, the Works Series can easily be travel adjusted in 10mm increments with just a few tools at home. Built with a stiffer chassis, the Works Series gives a smoother, more controlled ride. All of Cane Creek’s suspension products are hand-built in Western North Carolina and rigorously tested in the Pisgah National Forest.
$699.00
The Beryl is a product aimed at the "set it and forget it" rider. The Beryl features all of the smooth qualities you've grown to expect from DVO in a condensed feature package. - D2 damper provides a 3-position low-speed compression adjuster to quickly go from a climb setting to wide open DH - OTT feature offers 3 settings of small bump compliancy to work with any air pressure or rider weight - Easy access external rebound adjuster provides a wide range to work with
$699.00
The Diamond D2 is the ultimate combination of simplicity and performance for the aggressive rider. With the same precision-designed chassis and 35mm stanchions as the D1 model, the Diamond D2 is a 140mm to 170mm aggressive trail weapon with condensed features. Four clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid-settings for everything in between. Externally adjustable rebound keeps for fork ready for what’s next. The internal 3-position OTT “Off The Top” adjusts the initial stroke. Our D2 product line is aimed at the “set it and forget it” rider. D2 offers all the buttery smooth ride characteristics unique to DVO but in a condensed feature package. - 3 position low-speed compression, rebound, internal 3 positions Off The Top (negative coil spring) adjustment, air spring - 140,150, 160, and 170mm travel options using internal spacers. Set to 170mm travel out of the box - 1-piece magnesium cast lower legs with fender mount with 35mm 7000 series aluminum upper tubes - 15x110mm thru-axle dropouts, 74mm post-mount disc brake only - Axle-to-crown 565mm
$749.00 - $999.00
Diamond For The Rough. In a time where standards are being reinvented every day, it's important to look through the clutter to find clarity. Find out what's actually here to stay and make an impact. We start with a simple question: What's going to improve the product and rider? The new Diamond has a host of features to cater to the aggressive rider who demands more. We gave the fork a top to bottom chassis overhaul with 10mm wider BOOST spacing that amplifies steering precision and control in the moments of "ultimate shred". We also increased the tire clearance, allowing you to utilize a bigger tire and still have clearance for mud. Six clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High-Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic which means the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry-exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stroke compromise. You really get the best of both worlds. Combining the stiff chassis characteristics with our exclusive features and damping design gives our forks a unique ride feel unlike anything else on the market. - D1 Damper - Compression Bladder - OTT Off the Top Adjuster - Shim Stack Controlled Damping
$1,049.00
Ready For Rowdy The little brother to the Onyx DC, this is the Onyx SC D1. At 180mm of travel, this is our top-of-the-line enduro race fork. Featuring the proven D1 damper, high/low-speed compression, rebound, and externally adjustable OTT. With 36mm stanchions and our stiffest chassis yet, charge hard into the roughest sections with confidence. Six clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High-Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic. meaning, the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry-exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stroke compromise. You really do the best of both worlds. Combining the stiff chassis characteristics with our exclusive features and damping design gives our forks a unique ride feel unlike anything else on the market. - D1 Damper - Compression Bladder - OTT Off the Top Adjuster - Shim Stack Controlled Damping
$1,199.00
Experience incredible steering precision, small bump sensitivity, and absolute control with the new Onyx 38. A unique E-Designed chassis, wider-than-ever stance, and burly 38mm stanchions launch the Onyx into a new era of MTB Suspension. All new demands require all new thinking. The Onyx D1 38 sets a new standard in E-Designed suspension. What does it mean to be specifically E-Designed? For years, the market has taken “acoustic” suspension and made after-thought upgrades in order to make it “E-Bike Approved”. Bumping up compression damping, using a slightly thicker crown, or just saying “Add 10 PSI” isn’t doing it right. E-Specific design means we thought about these needs from day one. How can we make a fork flex equally as one unit? How can we achieve unreal steering precision without the harshness or deflection? How can we control the fore and aft flex issues the added weight of an e-bike puts on a fork? Questions like these were the foundation, the bones of this concept. After years of engineering, different thinking, and countless hours testing, we nailed it. The final result wasn’t only a fork that met all the requirements and needs of a modern, aggressive E-bike, but it directly translated to a regular bike. NOT ONLY IS THIS THE PINNACLE OF E-BIKE SUSPENSION, IT’S THE NEW STANDARD FOR SUSPENSION. - Burly fork designed for the rigors of E-Bike use, providing steering precision without harshness or deflection - OTT (Off The Top) is an adjustable coil negative spring that allows the rider to dial in initial compliance without affecting the mid and end stroke - The D1 damper features updated high-flow compression and rebound porting to allow a linear suspension dynamic. This initial damping support without any high-speed harshness paired with a 30% increased volume in the Compression Bladder System results in increased small bump sensitivity and damping consistency - High flow linear rebound update increases response without a loss of control or damping - A purpose-built crown increases drop for extra down tube clearance and features a dual hollow bore design with strategically varied wall-thickness for improved stiffness and strength
$27.00 - $29.00
Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork
2021 Service Kit 40 Drop Upper Crown 14mm OS 48 Rake
On Sale
Designed for trail riding, the Factory Series 34 features a FIT4 damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth and ultra-durable Genuine Kashima Coat. These products are World Cup proven. Updated FIT4 With a new 8mm damper shaft and an average weight savings of 35 grams, the updated FIT4 damper provides more sensitivity while maintaining support during aggressive riding. Modifications to tuning and design provide a more usable range of adjustment. EVOL — Air Transfer Port System Our EVOL linear spring curve gives forks and shocks plushness off the top, extra mid-stroke support, and more tunable bottom-out progression, allowing riders to tap into the ideal pairing of front and rear-end feel. FLOAT EVOL Air Spring EVOL technology from rear shocks is integrated into all FOX forks. EVOL increases negative air spring volume, specifically positioned and sized for optimum small bump sensitivity.
$19.20 $24.00 20% Off
FOX QR 15 Geared Cam and Hardware QR Thru-axles for Fox suspension forks.
$23.20 $29.00 20% Off
Decal kits for Fox step cast suspension forks.
$30.00
This is a Fox 34mm Fork Low Friction Flangeless Dust Wiper Kit. Fox Part number 803-00-945
$30.00 - $35.00
Fox Dust Wiper Kit is standard equipment on Fox Forks and give them a smooth feel.
$399.00 $769.00 48% Off
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package
$399.00 - $499.00 $769.00 Up to 48% Off
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package
$399.00 $549.00 27% Off
Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible
$399.00 $539.00 26% Off
Model Year: 2021 Collection: FLOAT DPX2 Standard: Imperial Size: 7.5 x 2 Series: Factory Shaft Finish: Kashima Adjustment: 3pos-Adj Spring: Evol LV Remote: Spacer: 0.4 Spacer
$399.94 $599.00 33% Off
FOX FLOAT X Factory Rear Shock - Metric, 230 x 65 mm, EVOL LV, 2-Position Lever, Kashima Coat Factory says it all – feature-packed and designed to exceed the demands of Factory-level riders, but ready for everyone. Kashima Coat All-new chassis and damper High-flow main piston, air seal package Volume spacers with smaller increments and MCU bottom out bumper Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster Independent firm mode circuit – Clockable 2 position adjuster, Increased rebound adjuster range (over DPX2) Specifications: Stroke (mm): 65 Eyelet Diameter (mm): 12.7 Positive Spring: Air External Adjustments: Low Speed Compression Damping , Rebound Damping Eye to eye length (mm): 230 Lockout Switch: Shock Mounted Switch Metric: Yes
$429.00 $599.00 28% Off
FOX FLOAT X Factory Rear Shock - Metric, 210 x 52.5 mm, EVOL LV, 2-Position Lever, Kashima Coat Factory says it all – feature-packed and designed to exceed the demands of Factory-level riders, but ready for everyone. Kashima Coat All-new chassis and damper High-flow main piston, air seal package Volume spacers with smaller increments and MCU bottom out bumper Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster Independent firm mode circuit – Clockable 2 position adjuster, Increased rebound adjuster range (over DPX2) Specifications: Stroke (mm): 52.5 Eyelet Diameter (mm): 12.7 Positive Spring: Air External Adjustments: Low Speed Compression Damping , Rebound Damping Eye to eye length (mm): 210 Lockout Switch: Shock Mounted Switch Metric: Yes
$449.00 $679.00 34% Off
FOX DHX2 Factory Rear Shock - Standard, 8.5 x 2.5", 2-Position Lever, Hard Chrome Coat The World Cup proven DHX2 is full of features, delivering ultimate performance and control when the trail gets steep. A Ti-Nitride coating provides a smooth and ultra-durable finish, while the Advanced RVS damping system improves damping, control and consistency with even more tunability. High- and low-speed compression and high- and low-speed rebound adjustment Advanced Rod Valve System (RVS) damping provides more tunability High oil flow improves damping control and consistency X2 2-position Open/Firm lever retains high and low speed compression adjustment Coil spring sold separately Specifications: Eye to eye length (ins): 8.5 Stroke (ins): 2.5 Stroke (mm): 63 Eyelet Diameter (mm): 12.7 Positive Spring: Coil External Adjustments: Coil Preload , High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Eye to eye length (mm): 216 Lockout Switch: Shock Mounted Switch Metric: No
$469.94 $599.00 22% Off
FOX FLOAT X Factory Rear Shock - Metric, 210 x 50 mm, EVOL LV, 2-Position Lever, Kashima Coat Factory says it all – feature-packed and designed to exceed the demands of Factory-level riders, but ready for everyone. Kashima Coat All-new chassis and damper High-flow main piston, air seal package Volume spacers with smaller increments and MCU bottom out bumper Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster Independent firm mode circuit – Clockable 2 position adjuster, Increased rebound adjuster range (over DPX2) Specifications: Stroke (mm): 50 Eyelet Diameter (mm): 12.7 Positive Spring: Air External Adjustments: Low Speed Compression Damping , Rebound Damping Eye to eye length (mm): 210 Lockout Switch: Shock Mounted Switch Metric: Yes
$499.00 $969.00 49% Off
34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. - Genuine Kashima Coating on upper tubes - FLOAT EVOL air spring
$499.00 - $989.00 $989.00 Up to 50% Off
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Three on-the-fly compression damping positions: Open, Medium, Firm - Performance Series black-on-black graphics package
$549.00 $769.00 29% Off
With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you. - 700c chassis with clearance for large volume tires (50 mm max) - Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle - FLOAT EVOL Air Spring and GRIP damper, featuring three on-the-fly settings - Open, Medium, and Firm - Lightweight air spring optimized for short-travel - Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels - Integrated full fender mounts (700c x 45 mm max with fender)
Page 1 of 6 Next page