Suspension

Cane Creek Helm QR D-LOC Thru Axle Color: Black

Featuring an updated damper design with new compression and mid valve circuits, a new SKF oil seal head, and Motorex 2.5 weight damper oil. All of these elements work to reduce friction and increase sensitivity. The Limited Edition Helm MKII CHAMELEON is only available in 29-inch wheel | 44mm offset platform with both Air & Coil Spring options available Travel is pre-set at 160mm [Internally adjustable 130 – 160mm] – Bolt-on Helm Fender and Chameleon colour changing decals are included – - Spring - Double-Air system with tunable High volume positive and negative air springs [Air] - Stanchion Diameter - 35mm - Min. Brake Rotor Size - 180mm. *If you are using a Hope Tech brake on a Helm fork, you will need to use a 200mm rotor with appropriate adapter. - Spacing / Offset - "D-Loc" 15mm Bolt-on thru axle 15mm x 110 BOOST spacing / 44mm offset - Max Tire Size - 64mm wide by 749mm tall (29) / 75mm wide by 739mm tall (27.5+)

The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle

Ready For Rowdy The little brother to the Onyx DC, this is the Onyx SC D1. At 180mm of travel, this is our top-of-the-line enduro race fork. Featuring the proven D1 damper, high/low-speed compression, rebound, and externally adjustable OTT. With 36mm stanchions and our stiffest chassis yet, charge hard into the roughest sections with confidence. Six clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High-Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic. meaning, the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry-exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stroke compromise. You really do the best of both worlds. Combining the stiff chassis characteristics with our exclusive features and damping design gives our forks a unique ride feel unlike anything else on the market. - D1 Damper - Compression Bladder - OTT Off the Top Adjuster - Shim Stack Controlled Damping

Experience incredible steering precision, small bump sensitivity, and absolute control with the new Onyx 38. A unique E-Designed chassis, wider-than-ever stance, and burly 38mm stanchions launch the Onyx into a new era of MTB Suspension. All new demands require all new thinking. The Onyx D1 38 sets a new standard in E-Designed suspension. What does it mean to be specifically E-Designed? For years, the market has taken “acoustic” suspension and made after-thought upgrades in order to make it “E-Bike Approved”. Bumping up compression damping, using a slightly thicker crown, or just saying “Add 10 PSI” isn’t doing it right. E-Specific design means we thought about these needs from day one. How can we make a fork flex equally as one unit? How can we achieve unreal steering precision without the harshness or deflection? How can we control the fore and aft flex issues the added weight of an e-bike puts on a fork? Questions like these were the foundation, the bones of this concept. After years of engineering, different thinking, and countless hours testing, we nailed it. The final result wasn’t only a fork that met all the requirements and needs of a modern, aggressive E-bike, but it directly translated to a regular bike. NOT ONLY IS THIS THE PINNACLE OF E-BIKE SUSPENSION, IT’S THE NEW STANDARD FOR SUSPENSION. - Burly fork designed for the rigors of E-Bike use, providing steering precision without harshness or deflection - OTT (Off The Top) is an adjustable coil negative spring that allows the rider to dial in initial compliance without affecting the mid and end stroke - The D1 damper features updated high-flow compression and rebound porting to allow a linear suspension dynamic. This initial damping support without any high-speed harshness paired with a 30% increased volume in the Compression Bladder System results in increased small bump sensitivity and damping consistency - High flow linear rebound update increases response without a loss of control or damping - A purpose-built crown increases drop for extra down tube clearance and features a dual hollow bore design with strategically varied wall-thickness for improved stiffness and strength

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

2021 Service Kit 40 Drop Upper Crown 14mm OS 48 Rake

At under 1300g, the 32 Step-Cast is a superlight MTB fork and made for marathon racing. This Limited Edition fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class~With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty A new 7000 Series aluminum, zero-offset crown supports angled upper tubes that not only contributes to the 32 Step-Cast's stiffness, but when combined with the ultra-light steerer tube, saves approximately 20g over the previous model Fitted with the proven and reliable FLOAT EVOL air spring Three on-the-fly compression damping positions: Open, Medium, Firm Specifications: Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 160 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 32 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 58 Steerer Tube Length (mm): 264 keyword search: FOX Model Year 25 , FOX MY25 Color: Shiny Black S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 100 Axle to Crown Length: 503.7 Lockout Switch: Crown

Designed for trail riding, the Factory Series 34 features a FIT4 damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth and ultra-durable Genuine Kashima Coat. These products are World Cup proven. Updated FIT4 With a new 8mm damper shaft and an average weight savings of 35 grams, the updated FIT4 damper provides more sensitivity while maintaining support during aggressive riding. Modifications to tuning and design provide a more usable range of adjustment. EVOL — Air Transfer Port System Our EVOL linear spring curve gives forks and shocks plushness off the top, extra mid-stroke support, and more tunable bottom-out progression, allowing riders to tap into the ideal pairing of front and rear-end feel. FLOAT EVOL Air Spring EVOL technology from rear shocks is integrated into all FOX forks. EVOL increases negative air spring volume, specifically positioned and sized for optimum small bump sensitivity.

Designed for trail riding, the Factory Performance Elite 34 features a FIT4 damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. - Black anodized upper tubes - Performance Series black-on-black graphics package Wheel Size: 29" Positive Spring: Air Brake Type: Post Mount 160 Crown Race: 40 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Negative Spring: Air Stanchion Diameter: 34 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Maximum Tire Width: 63 Offset: 44 Steerer Tube Length (mm): 264 Color: Matte Black S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 120 Axle to Crown Length: 527 Lockout Switch: Crown Defined Color: Black

Decal kits for Fox step cast suspension forks.

The Eyelet Roller Bearing Kit replaces stock bushings found on FOX rear shocks, with 8 x 30mm roller bearings. Kit includes two outboard bearings, shims and spacer Installation and removal too required to complete service, sold separately

Fox Dust Wiper Kit is standard equipment on Fox Forks and give them a smooth feel.

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

From aggressive trail to enduro, the advanced damping, fade free performance and class-leading durability of FLOAT X makes it the versatile and lightweight choice for All-Mountain riders earning their descents. - Kashima Coat - All-new chassis and damper - High-flow main piston, air seal package - Volume spacers with smaller increments and MCU bottom out bumper - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster - Independent firm mode circuit – Clockable 2 position adjuster, Increased rebound adjuster range (over DPX2) - Optimized reservoir lengths per shock size - Hydraulic top out feature, Reduced damper noise - Bearing hardware compatible both sides, Air valve location offers improved frame fitment and pump access Stroke (mm): 57.5 Eyelet Diameter (mm): 12.7 Positive Spring: Air External Adjustments: Low Speed Compression Damping , Rebound Damping Eye to eye length (mm): 230 Lockout Switch: Shock Mounted Switch Metric: Yes

With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you. - 700c chassis with clearance for large volume tires (50 mm max) - Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle - FLOAT EVOL Air Spring and GRIP damper, featuring three on-the-fly settings - Open, Medium, and Firm - Lightweight air spring optimized for short-travel - Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels - Integrated full fender mounts (700c x 45 mm max with fender)

The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Three on-the-fly compression damping positions: Open, Medium, Firm - Performance Series black-on-black graphics package

The Award-Winning FLOAT X2 is full of features, delivering ultimate performance and control when the going gets rough. The Genuine Kashima Coating provides a buttery smooth and ultra-durable surface, combined with the XV EVOL air spring and Advanced RVS damping for more tunability. - Genuine Kashima Coat on air sleeve and body - XV EVOL air sleeve with 300psi max - Progressive bottom-out bumper - X2 2-position Open/Firm lever retains high and low speed compression adjustment - High- and low-speed compression and high- and low-speed rebound adjustment - Advanced Rod Valve System (RVS) damping system provides more tunability - Angled tank valve to improve pump clearance Eye to eye length (ins): 9.5 Stroke (ins): 3 Stroke (mm): 76 Eyelet Diameter (mm): 12.7 Positive Spring: Air External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Eye to eye length (mm): 241 Lockout Switch: None Metric: No

The Fox 34 A Float 29" AWL with RAIL shock is a fork with 100mm travel - designed for E-SUV riders. Equipped with integrated mounts for light and mudguard. Legendary FOX performance and durability combined in an all-new chassis optimized for the modern e-SUV application area With clearance for wide 2.6" tires and mudguard 58mm and 68mm fork steerer tube fit almost any frame Multiple award-winning RAIL damper delivers premium damper performance with intuitive adjustability and maximum durability Stiff 34mm e-optimized chassis meets the highest e-bike requirements It is possible to mount brake discs from 160 - 230mm Specifications: Wheel size: 29" Spring: Air Damping: RAIL damper Adjustments: Externally adjustable rebound damping and compression damping by Sweep-Adj Steerer: Tapered 1.5" to 1 1/8" 244mm Upper Tubes: 34mm Disc brake mount: Post Mount (PM6 - Direct Mount 160mm) Maximum Rotor Size: 230mm Drop out: 15x110 Boost Thru Axle with lever (QR) Offset: 44mm Travel: 100mm Max Tire width: 2.8" (2.6" with fender)

The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. -Step-Cast chassis -Black anodized upper tubes -FIT GRIP damper and FLOAT EVOL air spring -Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities -Performance Series black-on-black graphics package Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 160 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 34 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 63 Steerer Tube Length (mm): 264 keyword search: FOX Model Year 25 , FOX MY25 Color: Matte Black S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 120 Axle to Crown Length: 530 Lockout Switch: Crown Defined Color: Black

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

Gravel tuned, smoother, faster, and more confident. The lightest suspension fork FOX has ever built, the 32 Taper-Cast Gravel Fork greatly improves rider experience, increases control, takes the edge off extended gravel rides and dramatically expands the terrain you can cover Specifications: 50mm Travel 45mm Rake Grip SL 3Pos-Adj 1.5T

Gravel tuned, smoother, faster, and more confident. The lightest suspension fork FOX has ever built, the 32 Taper-Cast Gravel Fork greatly improves rider experience, increases control, takes the edge off extended gravel rides and dramatically expands the terrain you can cover Specifications: 40mm Travel 45mm Rake Grip SL 3Pos-Adj 1.5T

At under 1300g, the 32 Step-Cast is a superlight MTB fork and made for marathon racing. This Limited Edition fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class~With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty A new 7000 Series aluminum, zero-offset crown supports angled upper tubes that not only contributes to the 32 Step-Cast's stiffness, but when combined with the ultra-light steerer tube, saves approximately 20g over the previous model Fitted with the proven and reliable FLOAT EVOL air spring Three on-the-fly compression damping positions: Open, Medium, Firm Specifications: Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 160 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 32 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 58 Steerer Tube Length (mm): 264 keyword search: FOX Model Year 25 , FOX MY25 Color: Shiny Orange S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 100 Axle to Crown Length: 503.7 Lockout Switch: Crown

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. This fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. -Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class -Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue -The lower leg arch design pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter -The 34 SC’s arch juts forward to provide ample headtube clearance at full compression and the lower leg shape optimizes stiffness with the absolute minimal amount of material -Three on-the-fly compression damping positions: Open, Medium, Firm -Fitted with the proven and reliable FLOAT EVOL air spring -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 160 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 34 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 66 Steerer Tube Length (mm): 264 keyword search: FOX Model Year 25 , FOX MY25 S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 120 Axle to Crown Length: 530 Lockout Switch: Crown

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

FOX 38 Performance Elite Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions. - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - Equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping

At under 1300g, the 32 Step-Cast is a superlight MTB fork and made for marathon racing. This Limited Edition fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class~With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty A new 7000 Series aluminum, zero-offset crown supports angled upper tubes that not only contributes to the 32 Step-Cast's stiffness, but when combined with the ultra-light steerer tube, saves approximately 20g over the previous model Fitted with the proven and reliable FLOAT EVOL air spring Three on-the-fly compression damping positions: Open, Medium, Firm Specifications: Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 160 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 32 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 58 Steerer Tube Length (mm): 264 keyword search: FOX Model Year 25 , FOX MY25 Color: Shiny Black S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 100 Axle to Crown Length: 503.7 Lockout Switch: Remote

To celebrate 50 Years of pushing potential further, FOX is releasing a run of 32 Step-Cast Factory forks in their brand-new limited Podium Gold colorway. At under 1300g, the 32 Step-Cast is a superlight MTB fork and made for marathon racing. This Limited Edition fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. Once sold out, this color will not be restocked. -Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class -Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue -The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty -A new 7000 Series aluminum, zero-offset crown supports angled upper tubes that not only contributes to the 32 Step-Cast's stiffness, but when combined with the ultra-light steerer tube, saves approximately 20g over the previous model -Fitted with the proven and reliable FLOAT EVOL air spring -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 160 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 32 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 58 Steerer Tube Length (mm): 264 keyword search: Limited Edition Color: Podium Gold S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 100 Axle to Crown Length: 503.7 Lockout Switch: Crown Defined Color: Gold Weight: 1276

To celebrate 50 Years of pushing potential further, FOX is releasing a run of 34 Factory forks in their brand-new limited Podium Gold colorway. A trail fork not to be underestimated, the venerable 34 is more capable than ever before. With damping optimized for trail, the 34 excels at all-mountain descending while keeping the weight low. Trail riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. The GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency. Once sold out, this color will not be restocked. -GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency -The lower leg arch design pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter -The 34’s arch juts forward to provide ample headtube clearance at full compression and the lower leg shape optimizes stiffness with the absolute minimal amount of material -Lower leg bypass channel helps alleviate air pressure as the fork compresses by dramatically increasing air volume within the lower legs and reducing unintended pressure ramping -Lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating inner seals and bushings -Fitted with the proven and reliable FLOAT EVOL air spring -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 180 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 34 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 63 Steerer Tube Length (mm): 264 keyword search: Limited Edition Color: Podium Gold S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 140 Axle to Crown Length: 537 Lockout Switch: Crown Defined Color: Gold Weight: 1686

To celebrate 50 Years of pushing potential further, FOX is releasing a run of 34 Step-Cast Factory forks in their brand-new limited Podium Gold colorway. The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. This Limited Edition fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. Once sold out, this color will not be restocked. -Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class -Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue -The lower leg arch design pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter -The 34 SC’s arch juts forward to provide ample headtube clearance at full compression and the lower leg shape optimizes stiffness with the absolute minimal amount of material -Fitted with the proven and reliable FLOAT EVOL air spring -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 160 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 34 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 66 Steerer Tube Length (mm): 264 keyword search: Limited Edition Color: Podium Gold S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 120 Axle to Crown Length: 512 Lockout Switch: Crown Defined Color: Gold Weight: 1422

Fork For Remick

E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure. - Genuine Kashima Coating on upper tubes - GRIP2 damper with Variable Valve Control - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design - Lower leg bleeders - Direct mud guard mount

When you need to go really big, reach for the 38. Optimized for 160-180mm of travel, the 38 redefines capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability.?Welcome to the big time. GRIP X2 Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX. KABOLT X AXLE A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel. LOWER LEG BLEEDERS AND BYPASS CHANNELS Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness. DAMPER GRIP X2 DAMPER CONTROLS HSC - LSC - HSR - LSR AXLE Kabolt-X 110 RAKE 44mm STEERER 1.5 Tapered UPPER TUBE FINISH Kashima AIR CHANNELS Yes BLEEDERS Yes FLOATING AXLE Yes ROTOR SIZE 180 direct Post Mount, Up to 230 compatible MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment AIR SPRING FLOAT EVOL STARTING WEIGHT 2194g (38, 29, F-S, 180, Grip X, Kabolt X)

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. Genuine Kashima Coating on upper tubes 32 mm upper tubes and ample bushing overlap for a quality ride Hollowed out lower legs provide even more weight savings FIT4 damper and FLOAT air spring Specifications: Number of Chainrings: Chain Retaining Single Chainline/Hub Compatibility: 170/177 Hubs Spindle Interface Type: SRAM/Truvativ GXP Chainring BCD: 94 keyword search: 1x11 Color: Black Crank Intended Use: Fat Bike Crank Length (mm): 170 Pedal Spindle: 9/16" Rings: 30 Drivetrain Speeds: 11 , 10 Defined Color: Black BB Included: No

To celebrate 50 Years of pushing potential further, FOX is releasing a run of 36 Factory forks in their brand-new limited Podium Gold colorway. Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Trail and all-mountain riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. The GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency. Once sold out, this color will not be restocked. -GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency -The lower leg arch design of the 36 shaves every possible gram while maximizing stiffness and strength requirements of enduro and aggressive all-mountain riding -Lower leg bleeders allow atmospheric pressure equalization at the push of a button and the bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel for better fork performance by increasing small bump sensitivity and responsiveness -Fitted with the proven and reliable FLOAT EVOL air spring -Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 180 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 36 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 72 Steerer Tube Length (mm): 264 keyword search: Limited Edition Color: Podium Gold S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 160 Axle to Crown Length: 575 Lockout Switch: Crown Defined Color: Gold Weight: 1929

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time New GRIP X2 Damper - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference Kabolt X Axle - A lightweight bolt-on floating axle, the Kabolt X shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design. Chassis alignment reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel Lower Leg Bleeders and Bypass Channels - Bleeders allow atmospheric pressure equalization at the push of a button. Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel. Both result in better fork performance by increasing small bump sensitivity and responsiveness Lower Leg Arch - The lower leg design of the 38 shaves every possible gram while maximizing stiffness and strength requirements of enduro and gravity riding - Grip X2 - 44mm Rake - Kabolt X 110 - 1.5T 58HT - 170mm Travel

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Now available with the gravity-focused GRIP X2 damper. GRIP X2 Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX. KABOLT X AXLE A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel. LOWER LEG BLEEDERS AND BYPASS CHANNELS Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness. CHASSIS Standard DAMPER CONTROLS HSC - LSC - HSR - LSR AXLE Kabolt-X 110 RAKE 44mm STEERER 1.5 Tapered UPPER TUBE FINISH Kashima AIR CHANNELS Yes BLEEDERS Yes FLOATING AXLE Yes ROTOR SIZE. 180 direct Post Mount, Up to 230 compatible MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment AIR SPRING FLOAT EVOL STARTING WEIGHT 1929g (36, 29, F-S, 160, Grip X, Kabolt X)

Target locked on the top step of the podium and developed in the crucible of World Cup competition, the 40 is the definitive DH race fork.?FOX's GRIP X2 is the most tunable, supportive and smoothest descent-focused damper they've created, ensuring the 40 stays planted in the hot seat GRIP X2 is the most tunable, supportive and smoothest descent-focused damper FOX has created Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction and experience reduced fatigue Lower leg bleeders allow atmospheric pressure equalization at the push of a button and the bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel for better fork performance by increasing small bump sensitivity and responsiveness The lower leg arch design of the 40 maximizes strength and steering stiffness for downhill performance while adding no unnecessary weight Fitted with the proven and reliable FLOAT EVOL air spring Floating thru axle allows perfect chassis alignment and reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel Specifications: Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 203 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 30 Negative Spring: Air Stanchion Diameter: 40 Front Axle: 20mm Thru x 110mm Steerer Type: Straight Offset: 52 Maximum Tire Width: 63 Steerer Tube Length (mm): 272 keyword search: FOX Model Year 25 , FOX MY25 Color: Shiny Orange S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 203 Axle to Crown Length: 601.9 Lockout Switch: Crown

To celebrate 50 Years of pushing potential further, FOX is releasing a run of 40 Factory forks in their brand-new limited Podium Gold colorway. Target locked on the top step of the podium and developed in the crucible of World Cup competition, the 40 is the definitive DH race fork.?The GRIP X2 damper now offers more tunability and traction than ever before, ensuring the 40 stays planted in the hot seat. Once sold out, this color will not be restocked. -GRIP X2 is the most tunable, supportive and smoothest descent-focused damper they've created -Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction and experience reduced fatigue -Lower leg bleeders allow atmospheric pressure equalization at the push of a button and the bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel for better fork performance by increasing small bump sensitivity and responsiveness -The lower leg arch design of the 40 while maximizes strength and steering stiffness for downhill performance while adding no unnecessary weight -Fitted with the proven and reliable FLOAT EVOL air spring -Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 203 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 30 Negative Spring: Air Stanchion Diameter: 40 Front Axle: 20mm Thru x 110mm Steerer Type: Straight Offset: 52 Maximum Tire Width: 63 Steerer Tube Length (mm): 272 keyword search: Limited Edition Color: Podium Gold S.H.I.S. Stem Clamp Diameter: Direct Mount Travel (mm): 203 Axle to Crown Length: 601.9 Lockout Switch: Crown Defined Color: Gold Weight: 2745

- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks

- Replacement leg guards for Dorado forks

- Replacement damper kits

Handles terrain like a goat. Just because you're on a budget doesn't mean you can't ride a suspension fork that gives you excellent, smooth control. The Markhor features our KwikToggle damper with easy on/off lockout. With travel between 100mm and adjustable to 120mm, 80-100mm on (26"), the Markhor fork smooths out any line the trail puts in front of you. - Cost-effective and lightweight air spring fork that features the same Twin-Piston Chamber (TPC) rebound damping as the more expensive Manitou forks - 30mm aluminum stanchions with aluminum steerer - 100mm or 120mm Travel - 80-100mm on (26") - TS Air Spring - Kwik Toggle Compression Damping - TPC Rebound Damping

Handles terrain like a goat. Just because you're on a budget doesn't mean you can't ride a suspension fork that gives you excellent, smooth control. The Markhor features our KwikToggle damper with easy on/off lockout. With travel between 100mm and adjustable to 120mm, 80-100mm on (26"), the Markhor fork smooths out any line the trail puts in front of you. - 100mm or 120mm Travel - 80-100mm on (26") - TS Air Spring - Kwik Toggle Compression Damping - TPC Rebound Damping - Cost-effective and lightweight air spring fork that features the same Twin-Piston Chamber (TPC) rebound damping as the more expensive Manitou forks - 30mm aluminum stanchions with aluminum steerer - Requires 15x110mm Boost front hub

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Coil Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - 20mm hex axle provides superior torsional stiffness - Forged I-beam style crown: bigger, stronger and more durable - 1-1/8" threadless steel steerer and 32mm steel stanchions - Can be reduced to 80mm travel with included spacers

The Machete is purpose-built for slicing trails, with Kwik Toggle compression damping inspired by our renowned Absolute+ technology. Kwik Toggle achieves on/off lockout simplicity in a lightweight, practical package. - TS air spring with in-leg adjustable TPC rebound damping - Kwik-Toggle damper with lockout, adjustable rebound, and high-speed compression - 32mm black anodized stanchions with hollow bore forged aluminum crown - Easily upgradeable to remote using MILO upgrade kit part #314934 - Travel is internally adjustable from 80 to 120mm in 10mm increments - Disc brake only (74mm/6" post-mount) - 27.5x3.0"/29x2.5" maximum tire width

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - 80/100mm or 120/130mm Internally Adjustable Travel - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Wheel Size: 26" - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions

The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top-level performance to a new price point.

Rebirth of an Icon. The R7 has a vast history of combining a lightweight chassis with performance and reliability. And this latest incarnation of the icon is no different. The new R7 expert pairs superior damping thanks to our 3-position dual piston VTT damper with a lightweight and stiff 32mm chassis. - VTT damper with compression open mode and rebound adjustability - 32mm black anodized 6000 series aluminum stanchions with Reverse-Arch design - Internally adjustable from 120 to 80mm in 10mm increments - Available in two different offsets 44 or 51mm

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Dorado Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 15mm hex axle provides superior torsional stiffness - Dorado air spring with fixed Hydraulic Bottom Out - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 34mm aluminum stanchions

Featuring 37mm stanchions, home mechanic-approved travel adjustability from 180mm to 140mm, and our easy-to-use VTT-6P damper, the Mezzer Expert is the smart choice for anyone looking to dive into the Enduro Fork market. Should you later decide you would like more adjustability from your fork, factory upgrades such as IRT and MC2 are available and can be easily installed in your own garage. At 2030g this fork is the second lightest option available within the Enduro fork market, second only to the Mezzer Pro of course. - Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. - IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self-contained spacers. You'll never lose a volume spacer again. - Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. - VTT-6P damper provides 6 clicks to tune damping for all types of terrain - 37mm stanchions, Reverse-Arch design, and Hexlock SL2 axle for the ultimate stiffness - TSR, Trail Side Relief valves on the back of the lower legs allow air to be bled off if it builds up within the lower legs to keep things butter smooth between service intervals - Internally adjustable travel from 180mm to 140mm in 10mm increments with included spacers - 2.6" maximum tire width

Lighter, stiffer, and more tunable than its competitors, the Mattoc is the desired componentry for all bikes. The Mattoc Expert should be on your bike not just because it can address all needs, but because it can improve the riding experience in a meaningful way. The Expert version of #thepeoplesfork tips the scales at a scant 1770 grams yet is stiffer than nearly anything else available in its travel range. Translation: an extremely lightweight and efficient build whose industry-leading stiffness ensures precise and reactive handling ready to outperform any other product it is compared to. The Manitou Expert boasts an Expert Air spring with IVA, compression damping via the VTT-6P system, and rebound damping via an open cartridge with adjustable TPC. True to Manitou’s industry-leading tuning capabilities, the Expert allows adjustments via Air, Air Volume, Rebound, and 3-position Compression (Open, Trail, Lock) With Open Mode Low-Speed Compression Adjustment. Perhaps the most versatile fork available not only in terms of travel but also application and customization of performance. Such amazing performance, tailor-tuned to your needs, arises from Manitou’s never-ending search for a smoother and better, best ride. KEY FEATURES - 27.5” is 20g less than the previous model. - Over 19% stiffness increase from the current 27.5" 160mm to the new 27.5" 150mm. 29" Stiffness increases are higher. - Expert air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to DoradoTM Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider's weight, style, and conditions without the need for additional parts. - A single external compression adjuster that simultaneously adjusts HS and LS damping characteristics. It features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. The resulting wide tuning range combines the benefits of a low-speed platform and high-speed progressive tune can suit any terrain. - Trail Side Relief casting bleed screws allow users to release casting pressure from the fork. Casting pressure increase is normal, and extreme riding can increase the pressure at a fast rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance.

The new Mattoc is the fruit of one of the most profound development cycles in Manitou history. It is the physical embodiment of “great things take time”. It is not an offering that follows the crowd, designed around the latest trend or buzz of the market. Rather, a component that aims to add real value and benefit to the rider. Capable of not only pulling duty in a range of disciplines ranging from XC to light enduro but doing so with zero compromise makes the Mattoc “best-in-class” ! The lightest, stiffest, and most tunable fork over more segments than any of its competitors, the Mattoc PRO is an amazingly versatile product capable of vastly improving your time in the saddle. At 1750 grams it is a featherweight solution given its wide travel range, yet its industry-leading stiffness lends it to a performance without rival. Consider also its amazing reliability and you have a fork that does it all and does it amazingly. A true, no-compromise, authentic fork, serving the real needs of the widest range of the mtb public and offering serious performance advantages to each individual one of them, no matter how they choose to ride. The Dorado Air spring with IRT allows for an extremely lightweight build yet a suspension performance derived from our top-of-the-line DH fork. Compression damping via MC2 Sealed Cartridge with HBO technology and a sealed damper TPC for rebound, and you’ve got yourself an extremely sophisticated piece of suspension technology. Adjustable Air, IRT, Rebound, High and Low-Speed compression make for perhaps the most tunable, personalized custom performance suspension solution available on the market. Include all of this technology into an extremely stiff, reliable, 1750 gram package and you have a ride-changing component that is the envy of the industry Key Features: - 59 grams decrease from the previous model. - Over 19% stiffness increase from the current 27.5” 160mm to the new 27.5” 150mm. 29” Stiffness increases are higher. - DoradoTM air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm. - Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Dorado Air is our lightest-weight air spring technology. - Infinite Rate TuneTM (IRT) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed Dampers offer more consistent damping and lighter breakaway force, especially over long descents. Our Damper uses a bladder system to compensate for head build-up along with a relief valve. Using both systems gives us consistency along with a long service life. Having non-adjustable HBO eases setup for the user. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Releasing casting pressure can improve overall fork feel and small bump compliance.

Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. •140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) •27.5” and 29” wheels •Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - 37mm stanchions Reverse-Arch design and Hexlock SL2 axle for the ultimate stiffness - Fully adjustable IRT air spring to fine-tune ride feel - Sealed MC2 damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork