Suspension

The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard. - Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end - Legendary Bomber durability with 36mm stanchions - Buttery and easy-to-use GRIP damper - Tapered steerer tube for maximum stiffness - Adapters available for 15 x 100mm axle - 1.5 Tapered steerer - Offset: 37mm

- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks

To celebrate 50 Years of pushing potential further, FOX is releasing a run of 32 Step-Cast Factory forks in their brand-new limited Podium Gold colorway. At under 1300g, the 32 Step-Cast is a superlight MTB fork and made for marathon racing. This Limited Edition fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. Once sold out, this color will not be restocked. -Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class -Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue -The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty -A new 7000 Series aluminum, zero-offset crown supports angled upper tubes that not only contributes to the 32 Step-Cast's stiffness, but when combined with the ultra-light steerer tube, saves approximately 20g over the previous model -Fitted with the proven and reliable FLOAT EVOL air spring -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 160 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 32 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 58 Steerer Tube Length (mm): 264 keyword search: Limited Edition Color: Podium Gold S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 100 Axle to Crown Length: 503.7 Lockout Switch: Crown Defined Color: Gold Weight: 1276

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. Genuine Kashima Coating on upper tubes 32 mm upper tubes and ample bushing overlap for a quality ride Hollowed out lower legs provide even more weight savings FIT4 damper and FLOAT air spring Specifications: Number of Chainrings: Chain Retaining Single Chainline/Hub Compatibility: 170/177 Hubs Spindle Interface Type: SRAM/Truvativ GXP Chainring BCD: 94 keyword search: 1x11 Color: Black Crank Intended Use: Fat Bike Crank Length (mm): 170 Pedal Spindle: 9/16" Rings: 30 Drivetrain Speeds: 11 , 10 Defined Color: Black BB Included: No

With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you. - 700c chassis with clearance for large volume tires (50 mm max) - Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle - FLOAT EVOL Air Spring and GRIP damper, featuring three on-the-fly settings - Open, Medium, and Firm - Lightweight air spring optimized for short-travel - Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels - Integrated full fender mounts (700c x 45 mm max with fender)

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. Tailor made for the rigors of modern XC racing GRIP Damper - The GRIP damper tune is updated with pressure balancing to maximize damping performance while utilizing the spring-backed internal floating piston of Fox's more advanced GRIP dampers. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability Lower Leg Arch - The arch design is pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter. The 34 SC’s arch juts forward to provide ample headtube clearance at full compression. Countless engineering hours created an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Lower Leg Channels - Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel, resulting in better fork performance by increasing small bump sensitivity and responsiveness - Grip - 44mm Rake - 3Pos - 15QRx110 1.5T - 120mm Travel

To celebrate 50 Years of pushing potential further, FOX is releasing a run of 34 Factory forks in their brand-new limited Podium Gold colorway. A trail fork not to be underestimated, the venerable 34 is more capable than ever before. With damping optimized for trail, the 34 excels at all-mountain descending while keeping the weight low. Trail riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. The GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency. Once sold out, this color will not be restocked. -GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency -The lower leg arch design pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter -The 34’s arch juts forward to provide ample headtube clearance at full compression and the lower leg shape optimizes stiffness with the absolute minimal amount of material -Lower leg bypass channel helps alleviate air pressure as the fork compresses by dramatically increasing air volume within the lower legs and reducing unintended pressure ramping -Lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating inner seals and bushings -Fitted with the proven and reliable FLOAT EVOL air spring -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 180 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 34 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 63 Steerer Tube Length (mm): 264 keyword search: Limited Edition Color: Podium Gold S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 140 Axle to Crown Length: 537 Lockout Switch: Crown Defined Color: Gold Weight: 1686

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. Tailor made for the rigors of modern XC racing GRIP SL Damper - The GRIP SL is an incredibly light, short travel-specific damper that not only saves weight, but provides an unparalleled ride feel in its class. Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue Lower Leg Arch - The arch design is pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter. The 34 SC’s arch juts forward to provide ample headtube clearance at full compression. Countless engineering hours created an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Kabolt SL Axle - The svelte new Kabolt SL thru-axle drops an additional 12g over our standard Kabolt axle by eliminating the additional weight of an axle nut and decreasing the flange diameter - Grip SL - 44m Rake - 3Pos-Adj - Kabolt SL 100 1.5T - 120mm Travel

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. Tailor made for the rigors of modern XC racing GRIP SL Remote Damper - The GRIP SL is an incredibly light, short travel-specific damper that not only saves weight, but provides an unparalleled ride feel in its class. Riders experience optimized pedal-to-bump efficiency with the convenience of handlebar-mounted remote switch to activate firm mode Lower Leg Arch - The arch design is pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter. The 34 SC’s arch juts forward to provide ample headtube clearance at full compression. Countless engineering hours created an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Kabolt SL Axle - The svelte new Kabolt SL thru-axle drops an additional 12g over our standard Kabolt axle by eliminating the additional weight of an axle nut and decreasing the flange diameter - Grip SL - 44m Rake - 3Pos-Adj - Kabolt SL 100 1.5T - 120mm Travel

To celebrate 50 Years of pushing potential further, FOX is releasing a run of 34 Step-Cast Factory forks in their brand-new limited Podium Gold colorway. The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. This Limited Edition fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. Once sold out, this color will not be restocked. -Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class -Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue -The lower leg arch design pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter -The 34 SC’s arch juts forward to provide ample headtube clearance at full compression and the lower leg shape optimizes stiffness with the absolute minimal amount of material -Fitted with the proven and reliable FLOAT EVOL air spring -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 160 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 34 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 66 Steerer Tube Length (mm): 264 keyword search: Limited Edition Color: Podium Gold S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 120 Axle to Crown Length: 512 Lockout Switch: Crown Defined Color: Gold Weight: 1422

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

This is a Fox 34mm Fork Low Friction Flangeless Dust Wiper Kit. Fox Part number 803-00-945

To celebrate 50 Years of pushing potential further, FOX is releasing a run of 36 Factory forks in their brand-new limited Podium Gold colorway. Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Trail and all-mountain riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. The GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency. Once sold out, this color will not be restocked. -GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency -The lower leg arch design of the 36 shaves every possible gram while maximizing stiffness and strength requirements of enduro and aggressive all-mountain riding -Lower leg bleeders allow atmospheric pressure equalization at the push of a button and the bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel for better fork performance by increasing small bump sensitivity and responsiveness -Fitted with the proven and reliable FLOAT EVOL air spring -Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 180 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 40 Negative Spring: Air Stanchion Diameter: 36 Front Axle: 15mm Thru x 110mm Steerer Type: Tapered Offset: 44 Maximum Tire Width: 72 Steerer Tube Length (mm): 264 keyword search: Limited Edition Color: Podium Gold S.H.I.S. Stem Clamp Diameter: 28.6 Travel (mm): 160 Axle to Crown Length: 575 Lockout Switch: Crown Defined Color: Gold Weight: 1929

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

36 Grip2 Damper Assembly for Fox suspension forks.

E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure. - Genuine Kashima Coating on upper tubes - GRIP2 damper with Variable Valve Control - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design - Lower leg bleeders - Direct mud guard mount

When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time New GRIP X2 Damper - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference Kabolt X Axle - A lightweight bolt-on floating axle, the Kabolt X shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design. Chassis alignment reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel Lower Leg Bleeders and Bypass Channels - Bleeders allow atmospheric pressure equalization at the push of a button. Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel. Both result in better fork performance by increasing small bump sensitivity and responsiveness Lower Leg Arch - The lower leg design of the 38 shaves every possible gram while maximizing stiffness and strength requirements of enduro and gravity riding - Grip X2 - 44mm Rake - Kabolt X 110 - 1.5T 58HT - 170mm Travel

When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time New GRIP X2 Damper - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference Kabolt X Axle - A lightweight bolt-on floating axle, the Kabolt X shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design. Chassis alignment reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel Lower Leg Bleeders and Bypass Channels - Bleeders allow atmospheric pressure equalization at the push of a button. Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel. Both result in better fork performance by increasing small bump sensitivity and responsiveness Lower Leg Arch - The lower leg design of the 38 shaves every possible gram while maximizing stiffness and strength requirements of enduro and gravity riding

To celebrate 50 Years of pushing potential further, FOX is releasing a run of 40 Factory forks in their brand-new limited Podium Gold colorway. Target locked on the top step of the podium and developed in the crucible of World Cup competition, the 40 is the definitive DH race fork.?The GRIP X2 damper now offers more tunability and traction than ever before, ensuring the 40 stays planted in the hot seat. Once sold out, this color will not be restocked. -GRIP X2 is the most tunable, supportive and smoothest descent-focused damper they've created -Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction and experience reduced fatigue -Lower leg bleeders allow atmospheric pressure equalization at the push of a button and the bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel for better fork performance by increasing small bump sensitivity and responsiveness -The lower leg arch design of the 40 while maximizes strength and steering stiffness for downhill performance while adding no unnecessary weight -Fitted with the proven and reliable FLOAT EVOL air spring -Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design -Kashima Coating on upper tubes for added durability Positive Spring: Air Wheel Size: 29" Brake Type: Post Mount 203 External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Crown Race: 30 Negative Spring: Air Stanchion Diameter: 40 Front Axle: 20mm Thru x 110mm Steerer Type: Straight Offset: 52 Maximum Tire Width: 63 Steerer Tube Length (mm): 272 keyword search: Limited Edition Color: Podium Gold S.H.I.S. Stem Clamp Diameter: Direct Mount Travel (mm): 203 Axle to Crown Length: 601.9 Lockout Switch: Crown Defined Color: Gold Weight: 2745

Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. With the new X2 damper the Fox 40 is the downhill racer's edge New GRIP X2 Damper - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference Lower Leg Bleeders and Bypass Channels - Bleeders allow atmospheric pressure equalization at the push of a button. Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel. Both result in better fork performance by increasing small bump sensitivity and responsiveness Lower Leg Arch - The lower leg design of the 40 while maximizes strength and steering stiffness for downhill performance while adding no unnecessary weight Floating Axles - The 40’s floating thru axle allows perfect chassis alignment and reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel - Grip X2 - 44mm Rake - 20TAx110 - 203mm Travel

Decal kits for Fox step cast suspension forks.

The Eyelet Roller Bearing Kit replaces stock bushings found on FOX rear shocks, with 8 x 30mm roller bearings. Kit includes two outboard bearings, shims and spacer Installation and removal too required to complete service, sold separately

From aggressive trail to enduro, the advanced damping, fade free performance and class-leading durability of FLOAT X makes it the versatile and lightweight choice for All-Mountain riders earning their descents. - Kashima Coat - All-new chassis and damper - High-flow main piston, air seal package - Volume spacers with smaller increments and MCU bottom out bumper - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster - Independent firm mode circuit – Clockable 2 position adjuster, Increased rebound adjuster range (over DPX2) - Optimized reservoir lengths per shock size - Hydraulic top out feature, Reduced damper noise - Bearing hardware compatible both sides, Air valve location offers improved frame fitment and pump access Stroke (mm): 57.5 Eyelet Diameter (mm): 12.7 Positive Spring: Air External Adjustments: Low Speed Compression Damping , Rebound Damping Eye to eye length (mm): 230 Lockout Switch: Shock Mounted Switch Metric: Yes

The Award-Winning FLOAT X2 is full of features, delivering ultimate performance and control when the going gets rough. The Genuine Kashima Coating provides a buttery smooth and ultra-durable surface, combined with the XV EVOL air spring and Advanced RVS damping for more tunability. - Genuine Kashima Coat on air sleeve and body - XV EVOL air sleeve with 300psi max - Progressive bottom-out bumper - X2 2-position Open/Firm lever retains high and low speed compression adjustment - High- and low-speed compression and high- and low-speed rebound adjustment - Advanced Rod Valve System (RVS) damping system provides more tunability - Angled tank valve to improve pump clearance Eye to eye length (ins): 9.5 Stroke (ins): 3 Stroke (mm): 76 Eyelet Diameter (mm): 12.7 Positive Spring: Air External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Eye to eye length (mm): 241 Lockout Switch: None Metric: No

FLOAT answers the demands of the modern trail rider; a firm pedal platform for uphill efficiency and confidence-inducing, trail-hugging descent capability, all in a lightweight package. Trail riders seek a shock with the performance of a Float X but with lightweight capability like that found in the Float SL. Yet there is nothing middle-of-the-road about FLOAT. With its large volume EVOL air spring, riders can run their shock at lower air pressures for a more linear feel throughout the stroke. This results in smoother small bump performance, better grip at the tires and a shock that will not overheat on the demanding descents. - Factory models are feature-packed and designed to exceed the demands of Factory-level riders with slippery smooth, ultra-durable Genuine Kashima Coat - Optimized suspension for trail riding - firm platform for pedaling and climbing efficiency without penalizing descending performance - New large diameter main piston, valving, and IFP for increased performance, consistency, and tuneability - Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity - MCU bottom-out bumper for end-stroke progressivity - Open, Medium and Firm modes of compression adjustment - Adjustable rebound and air spring pressure Stroke (mm): 50 Eyelet Diameter (mm): Trunnion, 12.7 Positive Spring: Air External Adjustments: High Speed Compression Damping , Low Speed Compression Damping , Rebound Damping Eye to eye length (mm): 185 Lockout Switch: Shock Mounted Switch Metric: Yes

Fox Dust Wiper Kit is standard equipment on Fox Forks and give them a smooth feel.

Fork For Remick

FOX Kabolt Axle Assembly, Black, for 15x110mm "Boost" Forks

FOX QR 15 Geared Cam and Hardware QR Thru-axles for Fox suspension forks.

Cane Creek Helm QR D-LOC Thru Axle Color: Black