Forks

2021 Service Kit 40 Drop Upper Crown 14mm OS 48 Rake

Absolute lightest in XC, made for marathon. At under 1300g, the 32 Step-Cast is the lightest MTB fork and made for marathon racing. With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor. Available in 100mm travel only GRIP SL Damper - The GRIP SL is an incredibly light, short travel-specific damper that not only saves weight, but provides an unparalleled ride feel in its class. Riders experience a supple stroke in the early stages of the travel with an optimized pedal-to-bump efficiency as well as a smooth blowoff force in lockout mode to reduce rider fatigue Rear Arch Matrix - The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty. With 100mm of travel in the 32 Step-Cast, the rear arch has all the necessary clearance for XC frames Kabolt SL Axle - The svelte new Kabolt SL thru-axle drops an additional 12g over our standard Kabolt axle by eliminating the additional weight of an axle nut and decreasing the flange diameter Redesigned Crown - A new 7000 Series aluminum, zero-offset crown supports angled upper tubes, rather than relying on extra material to achieve rake overall rake. The crown not only contributes to the 32 Step-Cast’s stiffness, but when combined with our ultra-light steerer tube, saves approximately 20g over the previous model - Grip SL - 44mm Rake - 3Pos-Adj - Kabolt SL 110 1.5T - 100mm Travel

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. Tailor made for the rigors of modern XC racing GRIP Damper - The GRIP damper tune is updated with pressure balancing to maximize damping performance while utilizing the spring-backed internal floating piston of Fox's more advanced GRIP dampers. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability Lower Leg Arch - The arch design is pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter. The 34 SC’s arch juts forward to provide ample headtube clearance at full compression. Countless engineering hours created an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Lower Leg Channels - Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel, resulting in better fork performance by increasing small bump sensitivity and responsiveness - Grip - 44mm Rake - 3Pos - 15QRx110 1.5T - 120mm Travel

Designed for trail riding, the Factory Series 34 features a FIT4 damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth and ultra-durable Genuine Kashima Coat. These products are World Cup proven. Updated FIT4 With a new 8mm damper shaft and an average weight savings of 35 grams, the updated FIT4 damper provides more sensitivity while maintaining support during aggressive riding. Modifications to tuning and design provide a more usable range of adjustment. EVOL — Air Transfer Port System Our EVOL linear spring curve gives forks and shocks plushness off the top, extra mid-stroke support, and more tunable bottom-out progression, allowing riders to tap into the ideal pairing of front and rear-end feel. FLOAT EVOL Air Spring EVOL technology from rear shocks is integrated into all FOX forks. EVOL increases negative air spring volume, specifically positioned and sized for optimum small bump sensitivity.

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. Tailor made for the rigors of modern XC racing GRIP SL Damper - The GRIP SL is an incredibly light, short travel-specific damper that not only saves weight, but provides an unparalleled ride feel in its class. Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue Lower Leg Arch - The arch design is pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter. The 34 SC’s arch juts forward to provide ample headtube clearance at full compression. Countless engineering hours created an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Kabolt SL Axle - The svelte new Kabolt SL thru-axle drops an additional 12g over our standard Kabolt axle by eliminating the additional weight of an axle nut and decreasing the flange diameter - Grip SL - 44m Rake - 3Pos-Adj - Kabolt SL 100 1.5T - 120mm Travel

The lightest 34 ever, the 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class leading tunability, chassis stiffness and strength. Tailor made for the rigors of modern XC racing GRIP SL Remote Damper - The GRIP SL is an incredibly light, short travel-specific damper that not only saves weight, but provides an unparalleled ride feel in its class. Riders experience optimized pedal-to-bump efficiency with the convenience of handlebar-mounted remote switch to activate firm mode Lower Leg Arch - The arch design is pairs perfectly with modern trail bikes, where head tube profiles have grown larger and fork offsets shorter. The 34 SC’s arch juts forward to provide ample headtube clearance at full compression. Countless engineering hours created an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Kabolt SL Axle - The svelte new Kabolt SL thru-axle drops an additional 12g over our standard Kabolt axle by eliminating the additional weight of an axle nut and decreasing the flange diameter - Grip SL - 44m Rake - 3Pos-Adj - Kabolt SL 100 1.5T - 120mm Travel

When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time New GRIP X2 Damper - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference Kabolt X Axle - A lightweight bolt-on floating axle, the Kabolt X shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design. Chassis alignment reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel Lower Leg Bleeders and Bypass Channels - Bleeders allow atmospheric pressure equalization at the push of a button. Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel. Both result in better fork performance by increasing small bump sensitivity and responsiveness Lower Leg Arch - The lower leg design of the 38 shaves every possible gram while maximizing stiffness and strength requirements of enduro and gravity riding - Grip X2 - 44mm Rake - Kabolt X 110 - 1.5T 58HT - 170mm Travel

When you need to go really big, reach for the 38. Optimized for 160-180mm of travel and packing the same revolutionary feature set as the 36, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time New GRIP X2 Damper - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference Kabolt X Axle - A lightweight bolt-on floating axle, the Kabolt X shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design. Chassis alignment reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel Lower Leg Bleeders and Bypass Channels - Bleeders allow atmospheric pressure equalization at the push of a button. Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel. Both result in better fork performance by increasing small bump sensitivity and responsiveness Lower Leg Arch - The lower leg design of the 38 shaves every possible gram while maximizing stiffness and strength requirements of enduro and gravity riding

Target locked on the top step of the podium, developed in the crucible of World Cup competition, the 40 is the definitive DH race fork. With the new X2 damper the Fox 40 is the downhill racer's edge New GRIP X2 Damper - GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction. It gives you the confidence to push the limits of downhill and enduro racing, all while reducing overall rider fatigue. GRIP X2 is the winning difference Lower Leg Bleeders and Bypass Channels - Bleeders allow atmospheric pressure equalization at the push of a button. Lower leg bypass channels increase volume to alleviate pressure ramping as the fork moves through its travel. Both result in better fork performance by increasing small bump sensitivity and responsiveness Lower Leg Arch - The lower leg design of the 40 while maximizes strength and steering stiffness for downhill performance while adding no unnecessary weight Floating Axles - The 40’s floating thru axle allows perfect chassis alignment and reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel - Grip SL - 44mm Rake - 3Pos-Adj - Kabolt SL 110 1.5T - 120mm Travel

- Chrome lugged crown with Tange CrMo legs/steerer - 41mm rake - Axle-crown: 365mm - Brake mount: caliper - Steerer: straight - Wheel (legs): 700c (curved)

Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs

FOX QR 15 Geared Cam and Hardware QR Thru-axles for Fox suspension forks.

Decal kits for Fox step cast suspension forks.

- Replacement leg guards for Dorado forks

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

- Includes dust wipers - Bushings not included

This is a Fox 34mm Fork Low Friction Flangeless Dust Wiper Kit. Fox Part number 803-00-945

Fox Dust Wiper Kit is standard equipment on Fox Forks and give them a smooth feel.

• Caliper brake mounts • 35mm rake • High-tensile steel construction • 1-inch steerer diameter • 185mm steerer length • Threaded fork • Compatible with 20-inch wheels

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 200mm - Brake Mount: Caliper - Axle-to-Crown: 395mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 100mm

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 137mm - Brake Mount: Caliper - Rake: 35mm - Axle-to-Crown: 315mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 40mm

- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Axle-to-Crown: 365mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 120mm - Steerer Length: 200mm - Steerer Size: 1-inch

Economically priced hi-tensile steel MTB fork for 26-inch wheels. - Steerer Type: Threaded Steerer - Size: 1" (7/8 ID) - Steerer Length: 198mm - Rake: 45mm - Axle-to-Crown: 393mm - Race Diameter: 27mm - Axle: 3/8" - Thread Length: 95mm

- Hi-tensile steel construction - Available with brake studs or without - 60mm rake - Type: Cruiser Size: 26" - Steerer Type: Threaded Steerer - Steerer Length: 250mm - Axle-to-Crown: 400mm - Axle: 3/8" - Thread Length: 125mm - O.L.D.: 100mm

- Brake mounts: Caliper - Construction: Hi-tensile steel - Rake: 50mm - Type: LW - Steerer type: Threaded - Race diameter: 27mm - Axle: 3/8'inch

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm

• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 180mm