Cables

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - SRAM/Shimano - Slick cables are die-extruded for smooth operation - Pre-stretched - Color: Silver - Quantity Included: 1 - Diameter: 1.5 mm

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

Replacement parts for Jagwire's Elite Link kits keep things functioning as intended. - Extra links for long housing runs or replacing damaged sections - 20 links at 10mm of length each

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.5mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

The Problem Solvers Downtube Shift Cable Adjusters replace your existing shift adjusters, or let you add integrated shifters to your current down tube shifter-equipped road bike. Made from durable plastic and stainless steel, these adjusters are built to last for countless miles on your road steed. - Sold as a pair - Comes with mounting hardware

Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.

Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. - Lightweight resin/alloy design

Shimano, SLR brake housing, 40m, Black

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

- 1.5mm x 1700mm advanced die-drawn stainless steel cable is low friction with minimal elongation for smooth and responsive braking performance - Recommend for use with Ciclovation™ Premium or Advanced outer casing systems - Compatible with all cable-actuated road bike brake systems - Compatible with all high-performance outer casing, lubricants, and end caps

Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.1mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant

- Pre-stretched Teflon coated 19 strand inner wire

Jagwire Sport Shift XL cable kits are perfect for bikes that need extra-long cables and housing. - Sport Slick Stainless inner cables resist corrosion and are die-drawn to reduce surface friction - Compressionless LEX-SL housing uses Slick-Lube liners to protect the cables and ensure consistent performance - Sealed end caps help keep contaminants out of the housing - Anti-Kink End Caps prevent damage when bicycle is folded - The single-ended SRAM/Shimano compatible cables end are weld-cut for easy installation

A great replacement for OE cables and a perfect way to bring style to a bike, our Universal Sport Brake Kits make it easy. They come with double-ended Slick Stainless cables compatible with SRAM and Shimano road and mountain systems. Our new and improved Slick-Lube liners reduce friction, providing improved shifting precision and long-lasting performance. - Double-ended brake cables are compatible with both mountain and road brakes - Sport Slick Stainless cables combined with Slick-Lube housing liners offer dependable braking performance and durability - All parts needed for a complete brake cable/housing install are included - OEM-level cables and housing with high-quality small parts

Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length

- Aluminum cable crimps to prevent frayed cables - 1.2mm for shift cables or 1.6mm for brake cables - Silver aluminum - 250-count bottle

Two-piece threaded cable tip contains the cable end without crushing it. CNC aluminum, no tools needed to install, reusable.

- All Yokozuna cables have high-grade raw materials, flexibility, strength, tight construction, and excellent quality control - Premium stainless steel for greater durability - Standard cables are high-strength die-drawn steel cables with proprietary Sn50 plating that exhibits corrosion resistance superior to a zinc galvanized cable - Made in Japan - 1700mm

- Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag - Premium stainless steel for greater durability - Lead and Dioxin free. Made in Japan

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

The Jagwire Pro Shift kit is a great way to upgrade from OEM cables and housing. Slick polished cables reduce friction and deliver long lasting performance, and continuously lubricated Slick-Lube liners provide precise cable movement. - Pro Slick Polished inner cables reduce friction and have no coating to wear off - Continuously lubricated LEX-SL linear-strand provides consistent, compressionless performance - Inner cables, housing, and small parts necessary for installation on a road or mountain bike are included - Includes longer cables and extra housing for compatibility with most large frames and bikes with continuous housing - Available in a wide range of colors to match Jagwire Pro Brake and Hydraulic Hose kits - Single-ended SRAM/Shimano compatible cable ends are weld-cut for easy installation

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

- Great for center-pull cantilever brake setups - Fits threadless fork steerer tubes - Includes barrel adjuster - 24mm cable stop drop - AL6061-T6 alloy construction

- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. Compatibility - HFA207: Fits SRAM Guide R/RS/RSC/Ultimate and Avid Juicy 5/7/Carbon/Ultimate - HFA208: Fits SRAM DB5 Guide and Level and Avid Elixir, Trail, and XX - HFA209: Fits SRAM Guide and Level and Avid Code, DB, Elixir, and Juicy - HFA210: Fits SRAM Level TLM/Ultimate and 2018 Code R/RSC - HFA213: Fits SRAM RED eTap HRD and S900 Aero HRD

Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance. The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - Ultra-slick polished inner cables minimize system friction - Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing - Includes enough housing and end caps to reach a rear derailleur or internally geared hub on a typical frame - Bikes with extra-large frames or unusual cable routing may need additional links and/or liners; service parts are available separately

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the Road Elite Link Brake Kit

Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars ferrules further reduce cable drag. Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars ferrules and one color-matched and one black alloy cable end caps. Available in chrome, 14K gold, red, blue and black with alloy Kollars ferrules and end caps.

- Brake housing for polymer coated brake cables - Refer to Documents and links to find the right product

Hydraulic hose with banjo fitting for TRP brakes.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

Cables are coated with a durable low-friction polymer. - Dupont Tefzel coating is more durable than previous coated cables - Length: 2350mm - Diameter: 1.6mm - Double Ended: No

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Hooded end caps offer the greatest level of protection against contamination and are ideal for high contamination environments. - Rubber seal for areas that need the most protection - Alloy body

Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters

Jagwire's Lined End Caps are nice ferrules designed for the ends of shift cable housing sections. They feature a small nylon extension on the end that helps reduce friction and adds protection for coated cables, too. You get a bottle of 50 for all your bicycle setup needs.

Origin-8's Braze-On Cable Stop with adjuster allows you to convert to STI style shifters. They mount onto down tube Braze-on bosses and are machined alloy with an anodized finish. The lightweight design lets you make the conversion without adding too much extra weight. One pair per package.

Slick compressionless gear cable/housing kits offer smooth, fast, accurate, and reliable shifting Kits include: - 4mm pre-lubed, Kevlar-lined, compressionless gear housing - 1.1mm stainless steel die-pulled and polished slick gear cable(s) with SRAM/Shimano compatible head(s) for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protector(s) - Cable tip(s)

SuperSlick compressionless brake cable/housing kits offer unrivaled braking performance Kits include: - 5mm pre-lubed, Kevlar-lined, compressionless brake housing - 1.5mm stainless steel die-pulled and polished super-slick brake cables with electrolysis coating and SRAM/Shimano compatible heads for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protectors - Cable tips

Slick compressionless brake cable/housing kits offer smooth, crisp, and reliable braking Kits include: - 5mm pre-lubed, Kevlar-lined, compressionless brake housing - 1.5mm stainless steel die-pulled and polished slick brake cables with SRAM/Shimano compatible heads for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protectors - Cable tips

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

- High-performance compressionless outer casing designed for precise and effortless shifting - A fully lubricated inner housing liner reduces friction and enhances lever feel - Stainless steel low friction inner cable - Recommended for 10-speed drivetrains - 10-speed or less shifting system recommended - Compatible with Shimano® and SRAM® shifting systems Includes: 2 x Sealed End Cap, Alloy/Black 8 x Open End Cap, Alloy/Black 6 x Cable Oring, Translucent (2 sets = 6pcs) 2 x Frame Protector, Mini Black 2 x Cable Tip, 1.2mm, Alloy/Silver

Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 2300mm liners

Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake - Black

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed adjustment for braided shift housing - Not recommended for use with brake systems - Size: 4.5mm

EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

Stainless steel cables are extruded to provide a smooth, low-friction surface.