Your SEO optimized title Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX Components

The Evo 2.5 Brake features a wider space to accomidate larger tires. Forged from aluminum for strength More clearance for larger tires Front or rear brake compatible Includes all necessary hardware Brake kit features all necessary hardware included, Odyssey Slim by Four brake pads, Monolever medium hindged lever and front for rear compatibility
The Sunday Slim Seatpost Clamp is a removable, ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. 2014-T6 aluminum construction Replaceable hardware Self-aligning nut Standard 1-1/8? size
$2.00
Alloy hub washers in anodized colors Sold individually Size: 10.2x25x2.3mm
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$3.99
- Sold in pairs - Allen wrench included
$4.99
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
$4.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
$4.99
Replacement hardware for all Sunday Freeze BMX stems. Comes in a pack of 6 bolts. -Thread: M8x1.25 -Length: 23mm -Head Diameter: 11mm -Wrench Size: 6mm Hex
$5.00
Samox BMX crankarm pinch bolts. M6 pinch bolt
$5.00
Samox BMX crankarm pinch bolts. M8 pinch bolt
$5.99
Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually
$6.50
The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly
$6.99
The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible
$7.99
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
$8.00
Male bolts for G Sport hubs. For 14mm Axles, and featuring both 17mm wrench flats and 6mm hex broach
$8.50 - $8.99
- Pad Attachment Style: Threaded Post - Rim Compatibility: Standard - Intended Brake Type: U-Brake - Pad Type: One Piece
$8.99
This pro-level spoke wrench is comfortable enough for doing daily full-on wheel builds and features G-Sport’s proprietary taper-hex nipple slot on one side and the traditional 3.2 (Zero/Black) spoke nipple slot on the other. Made from chromoly steel. Dual sided interface for greater versatility Taper-Hex slot delivers superior torque to G-Sport Taper-Hex nipples 3.2 (Zero/Black) slot works with traditional BMX spoke nipples Tough chromoly construction fights everyday wear and tear
$8.99
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
$8.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Features -Short, Medium, or Long to fit a range of handlebar sizes -Fits most detangler systems -Designed specifically for GTX-S and G3 Gyros
$9.99 - $22.99
- Press fit designed to work the hub's non-drive side collar.
$9.99
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends
$10.99
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
$10.99
The G.L.A.N.D. MKV builds on this hub guard's long-running history of protecting the spokes and hub while using the strength of the wheel lacing for structural support. The G.L.A.N.D. is made from proprietary plastic to keep the weight low and to spread impacts evenly while grinding - with as little resistance as possible. The updated design attaches to the wheel via easily sourced self-tapping Phillips-head screws and the G.L.A.N.D.’s fold-over locking tabs that keep the guard centered and firmly seated on the spokes. Super light, super affordable, and will fit most 36-H front hubs with a 3-Cross lacing pattern.
$10.99 $11.99 8% Off
The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.
$11.99
Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance. - 160mm lenght - Par Ends Included
$11.99
Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.
$11.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm
$11.99
Cornerstone Grip features a ribbed design with Cornerstone logo. - Includes Odyssey Par Ends
$11.99
The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort. - 160mm
$12.59 - $14.59
- Steel - Threads onto 3/8" axle - Knurled & grooved - Diameter: 33mm - Sold in pairs
Page 1 of 3 Next page