Parts

Sidi serves up this Drako Cleat Plate to replace plates that are worn and haggard and no longer offer the proper bite when installing new cleats. This is a brilliant way to extend the life of a very expensive shoe. Works with Drako shoes using the thin carbon XC sole only. Features - OEM stock replacement cleat plate - Works on Drako sole only

Description This Müve Fit Bike accessory allows for quick and easy saddle changes, as well as fine-tuning of the saddle angle. - Internal side clamping cups with centering springs for easy saddle load and unload - Side cups rotate to accommodate standard 7mm cylindrical rails and 7x9mm carbon rails - Single 5mm hex bolt allows for quick clamping and pressure control - Angle lock nut secures desired saddle angle - 10-degree (+/-) saddle tilt range - No tools needed for tilt adjustment

- 11 speed wide range cassette - 7075 Aluminum largest sprocket - Alloy spiders, spacers and lockring - Fits Shimano/SRAM freehub - 465g (11-46); 401g (11-42); 389g (11-40)

- Secure centerlock rotors on centerlock hubs - Compatible with 12mm, 15mm, and 20mm thru axles and QR - Made with 7075-T6 aluminum and machined at Wolf Tooth in Minnesota, USA - Can be installed with Wolf Tooth Pack Wrench. Torque to 40Nm. Not compatible with six-bolt rotors and hubs. Includes washer

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

- Aheadset preload adjusting bolt

Dia-Compe Star Nut for 1 1/8" Steerer (28.6mm)

Replacement small parts for Hope disc brake Hope disc brake calipers.

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Replacement piston and seals for Hope disc brake calipers.

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Sunlite Cottered Pins

- Crown Race MX - Size: MX TH 26.4mm