Filter By:
- Bar Ends (22)
- BMX Components (81)
- Bottom Brackets (283)
- Brakes/Levers/Pads (775)
- Brakes - Rim/V-Brake (691)
- Brakes - Road (683)
- Brakes - Disc (760)
- Brakes - Disc Rotors & Parts (18)
- Show More Categories
- Cables (266)
- Cassettes/Freewheels (172)
- Chainrings (323)
- Chains (152)
- Cranksets (369)
- Derailleurs (219)
- Forks (231)
- Groups (33)
- Eagle AXS Transmission (38)
- Handlebar Grips/Tape (399)
- Handlebars (398)
- Headsets (210)
- Pedals (476)
- Saddles (431)
- Seatposts (183)
- Shift/Brake Combinations (96)
- Shifters (147)
- Shocks (51)
- Stems (203)
- Other (2133)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$9.99
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
$99.00
A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep these pedals spinning smooth.
- Size: 110mm wide x 100mm long x 18mm high
- Spindle diameter: 9/16-inch
- Weight: 352 grams"
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep these pedals spinning smooth.
- Size: 110mm wide x 100mm long x 9mm high
- Spindle diameter: 9/16-inch
- Weight: 308 grams
Oval chainrings put down maximum power at the peak of your pedal stroke, allowing you to blast up and over tech chunky climbs
30t rings feature 12% ovality
32t rings feature less aggressive 6% "Almost Oval"
Machined in San Diego, CA, these chainrings are made of 7075 aluminum
SRAM 3-bolt Direct Mount fitment with 3mm offset for Boost chainlines
Works with both SRAM and Shimano 12 speed chains
Weight: 58g
$99.00
Machined in San Diego, CA, these round chainrings are made of 7075 aluminum
SRAM 3-bolt Direct Mount fitment with 3mm offset for Boost chainlines
Works with both SRAM and Shimano 12 speed chains
Weight: 58g
$99.00
Machined in San Diego, CA, these round chainrings are made of 7075 aluminum
SRAM 8-bolt Direct Mount fitment
Works with both SRAM and Shimano 12 speed chains
Weight: 58g
$189.99
- The All Around Pedal provides riders with more freedom of movement on the pedal and a less locked in feel. Ideal for the rider who likes to reposition their feet and make adjustments on the fly
- Tons of grip when you need it, but a bit more movement when you want it, making the All Around Pedal an ideal choice for Trail, Park, Enduro, DH and Freeriding
- Constructed from space-grade aluminum and featuring double-sealed bearings with 10 pins per side
- Axle material: 17-4 stainless steel. Internals: 1 Igus bushing and 4 bearings
- Platform: 106x110mm
- Weight: 365g
$249.99
5Dev's most aggressive and lightest pedal. At 343g, its low profile design, 24 pins and razor sharp 5 Axis Machined Design, makes it the ideal choice for the advanced rider looking for ultimate traction and performance from a flat pedal
Features strategic pins and machined grooves to deliver optimal grip for aggressive riding
Constructed from space-grade aluminum and featuring double-sealed bearings
Axle material: 17-4 stainless steel. Internals: 1 Igus bushing and 4 bearings
Platform: 106x110mm
Weight: 343g
Size: 9/16"
$499.99
These cranks are engineered for aggressive Trail, Enduro/park and DH style riding. Ideal for charging steep technical chunk, ripping laps at your local park, or sessioning your favorite jump line
Low profile crank arm reduces pedal strike during technical punchy climbs, allowing you to clean more sections of trail and get back up to take another lap with less effort
Compatible with SRAM 3-bolt direct mount chainring interface
Q Factor: 167mm for 52mm Boost (176mm for Super Boost+)
5 year warranty
Weight: 525g
$499.99 - $549.99
These cranks are engineered for aggressive Trail, Enduro/park and DH style riding. Ideal for charging steep technical chunk, ripping laps at your local park, or sessioning your favorite jump line
Low profile crank arm reduces pedal strike during technical punchy climbs, allowing you to clean more sections of trail and get back up to take another lap with less effort
Compatible with SRAM 3-bolt direct mount chainring interface
Q Factor: 167mm for 52mm Boost (176mm for Super Boost+)
5 year warranty
Weight: 525g
$14.66 - $16.00
Super hardened steel designed for high torque Singlespeed and BMX use.
$54.02
- Forged and CNC-machined aluminum with precision sealed bearings for 2-pc cranks and 24mm spindles - BSA 1.37"x24T for 68/73mm shells
$3.99
Replacement starnuts compatible with all headset systems.
$6.42
- Aheadset preload adjusting bolt, cap and star nut
- Bolt is hollow for cable pass-through
$119.99
Inspired by the BMX bars of yesteryear
- 6061 T6 aluminum
- Shot peened and anodized black or silver
- The 22mm OD crossbar is not there just for strength, but allows installing accessories
$20.00
This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame.
- Alloy construction
- Replacement derailleur hanger sold separately (Part Number DP0814)
- Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames
$25.00
• M4 threaded pedal cages mounting holes
• Four windows in pedal body large enough to fit double toe straps
• Polished Body
• Concave footbed
• Single-sided design
$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included.
- Aluminum hatch cover with stainless screws
- All necessary screws and plates included
$0.99
- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends
$3.36
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- Economy galvanized standard replacement cable
- AX-2654 and AX-2657 are double ended, with both Road and MTB anchors
- 1700mm length
$3.50
- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike
$5.12
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- Economy galvanized standard replacement cable
- 2000mm length
$5.54
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- 1700mm length
$5.76
- Basic housing and galvanized inner cable with header card
- Brake kit includes black casing and a 1.6mm cable
- Derailleur kit includes black casing and a 1.2mm cable
- Cables have dual ends with leads to fit any brake or shifter
$6.99
- Thermally bonded PTFE-coated slick galvanized cable for minimal friction
- 2000mm
$7.02
- 72mm long molded brake blocks with smooth post for common cantilever brakes
$7.39
- Premium 31-strand stainless-slick low-friction rust-resistant cable
- X-long 3000mm cables for non-traditional uses
$7.39
- Premium 31-strand stainless-slick low-friction rust-resistant cable
- X-long 3000mm cables for non-traditional uses
$7.99
- Thermally bonded PTFE-coated slick galvanized cable for minimal friction
- 1700mm
$7.99
- Premium 31-strand stainless-slick low-friction rust-resistant cable
- X-long 3000mm cables for non-traditional uses
- Save 50% or more when you buy in the 100pc shop dispenser filebox
$11.90 - $16.34
- Slotted aluminum barrel adjuster with backing nut for common brake levers
$12.39
- 55mm long forged aluminum holder with hardware to fit Shimano-type caliper brakes
- Replacement inserts fit most 55mm aluminum holders
$29.95
- Lightweight stainless steel rotor, Great for all-Mountain or enduro use
- International standard 6-Bolt 44mm bcd rotor mounting. 95/112/154G
$69.95
- Ultralight stainless steel rotor, ideal for XC use
- International standard 6-Bolt 44mm bcd rotor mounting. 56/70/82G
$37.95
- Slim style seat with minimal foam padding
- Hollow Pivotal bolt for added weight savings
- Pivotal fitment only
$75.00 - $99.99
$99.99
Up to 25% Off
- 7050 aluminum strong enough for aggressive Trail, Enduro and Downhill
- Gradually tapered bends make this 35mm bar look like a traditional 31.8 bar
- True-Sweep geometry eliminates the need to roll the bar forward
800mm length, easily cut-to-fit any riding style
$4.00
Disc Brake Adapters
$6.00
- Replacement barrel adjuster for FR5 and SD7 levers
- Includes one pair
$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$7.65
$9.00
15% Off
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$12.75
$15.00
15% Off
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$16.00 - $25.50
$19.00 - $30.00
Up to 16% Off
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$17.00
$18.00
6% Off
Hydraulic Disc Brake Compression Hose Nut, Qty 5
Hydraulic Hose Parts
$19.55
$23.00
15% Off
- Includes stainless bolts
- Fits 160mm front and 140mm rear rotors
$22.95 - $62.00
$27.00 - $62.00
Up to 15% Off
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$22.95
$27.00
15% Off
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$22.95
$27.00
15% Off
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
Page 1 of 126
Next page