Protective/Armor

TERATEC Plus Protection is designed with the principle of right materials, right places. Designed specifically to offer great impact protection in a slim, form fitting chassis. Upgraded with additional, dense, lateral protection padding, these guards offer excellent SmartShock CE Level 1 impact protection and abrasion resistance. All while still offering maximum breathability and flexibility. - Impact tested and certified to CE EN 1621-1:2012 Level 1 - Sleek, comfortable slip-on sleeves - Lateral protection upgrades over the Teratec - Completely pre-curved chassis for attack position - Nylon, anti-abrasion, outer skin - Mobility flex joint for smooth articulation - Tacky silicone elastic webbing helps prevent slippage - Fully ventilated rear mesh for maximum cooling

The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear. - Qmatter, protective padding - Silicone stopper - AeroMesh- light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1) - Available in youth sizing

Go big with confidence. Fox's Titan Race Liner Shorts offer exceptional protection for the serious gravity and trail riders out there. • Multi paneled articulated main body construction • Anatomically shaped molded foam hip pads • 1 piece molded chamois for comfort

Designed to be our most pedal-friendly protection, the Youth Enduro Elbow Sleeve has you covered wherever the trail takes you. These sleeve-style guards are designed using a moisture-wicking micro-lycra material with a nylon mesh rear panel for increased airflow. The D3O elbow inserts provide the perfect balance of comfort and protection as you get rowdy on the trail, and are removable so you can wash the sleeve itself. With silicon grip to hold the guards in place, these are great, minimal-feel elbow guards for young rippers.

Developed for cyclists who want enhanced flexibility, ventilation, and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad that uses our lightweight and highly impact-absorbent VPD compound. The pad is covered in reinforced stretch fabric and features neoprene antislip to keep the pad in place, even in rough riding conditions. A crash retention strap further increases security on this lightweight and low-profile elbow pad ideally suited to trail riding. - Lightweight and impact absorbing VPD compound - Reinforced stretch fabric - Neoprene anti-slip on the inside - Designed with a low profile - Crash retention strap (CRS) for a comfortable fit - Neoprene anti-slip on the inside

Developed for cyclists who want enhanced flexibility, ventilation and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad. Featuring a Crash Retention Strap (CRS) and neoprene anti-slip to ensure a comfortable fit, even in rough riding conditions. - Lightweight and impact absorbing VPD compound. - Reinforced stretch fabric. - Crash retention strap (CRS) for a comfortable fit. - Neoprene anti-slip on the inside. - Designed with a low profile.

Mountain biking has evolved considerably in recent years and bikes now offer access to every type of terrain and style of riding. So we have created the lightweight VPD Air sleeve as an option for those riders who are looking for a minimal level of padding and reinforcement, but with the highest levels of comfort, compression and ventilation. The VPD Air Sleeve comfort pads have been pre-shaped to offer enhanced flexibility and freedom of movement, and the silicone strips at the top and bottom of the pads ensure a precise and secure fit even through rough riding conditions. The pads are lightweight, and, thanks to the perforated fabric designed to increase airflow, offer optimized ventilation and moisture control. Ideal for long days on the bike or when you want some padding but without any penalty. - Pre-shaped low-profile sleeve comfort pads - Reinforced fabric outside elbow - Ventilated textile inside arm - Lightweight compression fabric for a secure and pressure free fit - Silicone strip at the top and bottom to secure in place - Perforated for optimized moisture and ventilation control

The Flex elbow/youth knee pads are for any rider needing complete coverage with confidence-inspiring protection. Constructed in the same way our adult Flex Knee pads with an open back and dual-layer protection the Flex has you covered.

Designed with valuable feedback from the legend himself, the Sam Hill Lite signature elbow pad builds off of our popular Transition elbow pad to be the ultimate ultra-lightweight elbow pad for all types of riding or racing. Light enough to be worn all day long. The Sam Hill Lite elbow pads mold with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. CE Certified Level 1. Compression square line Ripstop Spandex fabric allows for a durable lightweight feel along with great airflow. - Rollable and stash-able using the elastic loop - Durable elbow cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long bicep length fit for no slippage and all-day comfort - Articulated cut for the perfect fit - Silicone top and bottom elastic gripper - Certified CE/ EN 1621/1 Level 1 - Weight 105G pair (size XL)

Our super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.

More durability. More comfort. More customized fit. Pro-Rugged Elbow Guards deliver more because you demand it. So bring on more trails with sharp branches and rocks. Pro-Rugged Elbow Guards are made with the same legendary, soft, ultra-conforming G-Form technology that hardens on impact. But now with much, much more. Featuring SmartFlex: Flexible As You Ride. Hardens on Impact. - Body-mapped impact-absorbing SmartFlex pads - Armortex technology adds durability to your pads and resists tearing or catching - Ultra-comfortable double-knit compression fabric for extra protection - Extra-wide top gripper distributes pressure and keeps pads in place - Ventilated mesh back keeps you cool and dry - Low-profile bottom gripper keeps pads in place - Soft inner foam keeps guards secure and comfortable on your elbows - Machine washable

Our Enduro Elbow Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your elbows safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O elbow inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra

The Enduro Pro Knee guard offers our highest level of protection in an ultra-light pedal-friendly design. The slip-on design with flexible impact-absorbing Fox F3 Armor provides you with minimal restrictions and maximum benefits. - EN1621-1 level 1 knee including high & low conditions - Impact-absorbing foam provides full coverage & unrestricted range of motion - CE-certified coverage using Fox's proprietary F3 Armor - Moisture-wicking, open stretch mesh at back of knee for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Foam inserts are removable for easy washing - Certifications: EN1621-1 level 1 knee including high & low conditions

Our Pro-X3 line is designed for every rider in mind, from beginners to veterans and anyone in between. G-Form's industry leading SmartFlex protection is flexible as you ride, yet hardens on impact in the event of a crash. And SmartFlex pads are fully waterproof, so machine wash them as needed. - Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

- All Mountain to DH perfect for comprehensive protection at an affordable price - High impact protection featuring D30 T5 material which hardens upon impact yet flexes while riding - D30 T5 insert behind tough panels is EN 1621:1 rated

The Slayer Elbow Pads set the standard for lightweight, breathable and CE-certified elbow pad design. Featuring dual-density DK Impact foam and a durable Cordura outer, these pads maintain a breathable design that's light and comfortable enough for longer rides and hot weather. Their pre-curved shape and flexible foam padding design maintain a custom-fit feel, while silicone gripper cuffs ensure a slip-free fit. Integrated odor control helps fight the stink factor. - Shell: Cordura Polyester, 4-way stretch AriaprenePro, 4-way stretch mesh back: 80% Polyester, 20% Nylon - Insert: 100% DK Impact Polyurethane foam - Lightweight, low-profile CE-certified elbow protector (EN 1621-1 Level 1) - Dual-density DK Impact energy-absorbing foam technology - Cordura abrasion resistance - Polygiene Odor Control technology - Open-back design increases breathability - Pre-curved ergonomic patterning for enhanced fit

Easy to pull on. Easy to pedal in. Easy to forget you're wearing. The Slayer Bike Knee Sleeves offer low-profile padding for hot days and all-mountain riding. The form-fitting design uses energy-absorbing DK Impact foam for a flexible fit that conforms to match the shape of your leg. Snug-fitting, four-way stretch mesh with gripper strips keep them in place, and built-in odor control helps manage the stink. - 4-way stretch mesh back: 70% Polyester 30% Nylon - Insert: 100% DK Impact Polyurethane foam - Our lightest, lowest-profile, most-breathable knee pad - Perforated DK Impact energy absorbing foam technology - Aramid ripstop shell - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

There is no room for error when the trail gets technical. Kali’s Strike armor features Xelion padding for high impact protection and EVA padding in critical support areas. - Molded Xelion elbow cap - EVA padding next to elbow - Breathable mesh back panel - Non-slip bands (top & bottom) - Machine Washable - 3 Year Warranty

The Hack Evo guards are our entry-level option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These knee guards are light and extremely comfortable to wear. - Qmatter, protective padding - Low friction impact shells to absorb and distribute impact - Silicone stopper - AeroMesh light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)

Our only non-slip on design, the FORTIS features a protective shell for abrasion resistance and Level 1 impact protection to stand up to all your downhill riding needs. - Perforated neoprene chassis for breathability - Strategically placed perimeter embossed foam padding with ventilation - Tacky silicone elastic webbing to prevent slippage - Hook-and-loop closures with security cinch - Pre-curved chassis for attack position - Fortified injection-molded plastic shields - Spandex joint for ease of movement - Impacted Tested with Level 1 Protection - CE EN 1621-1:2012 Level 1

TERATEC Plus Knee Guards are designed with the principle of right materials, right places. Designed specifically to offer great impact protection in a slim, form fitting chassis. Upgraded with additional, dense, lateral protection padding, these guards offer excellent SmartShock CE Level 1 impact protection and abrasion resistance. All while still offering maximum breathability and flexibility. - Impact tested and certified to CE EN 1621-1:2012 Level 1 - Sleek, comfortable slip-on sleeves - Lateral protection upgrades over the Teratec - Completely pre-curved chassis for attack position - Fully vented Nylon, anti-abrasion, outer skin - Mobility flex joint for smooth articulation - Tacky silicone elastic webbing helps prevent slippage - Fully ventilated rear mesh for maximum cooling

The Hack Kids Lower Body Protective shorts protect at all important vital impact zones. Designed as underwear, the shorts are fitted tight and include an antibacterial, 3D, ergonomically-formed chamois. - NockOut absorbent padding - Antibacterial, vented, and ergonomically 3D formed chamois - Youth sizing

Protection that delivers supreme flexibility and ventilation, while offering impact absorbency certified to strict European standard EN 16211, Level 1. The VPD System Lite Knee is 3D-molded for an exceptional finish that delivers more ventilation than any other product in our VPD range. With a low-friction outer, the pad supports movement in a crash: vital for minimizing the level of energy transmitted to the body. The highly ventilated material delivers exceptional breathability for enhanced comfort while riding. VPD warms to the body and flexes for a personalized fit, yet hardens on impact for trusted impact absorption. - 3D molded VPD protection - EN 1621-1 certified shock absorption - Large ventilation channels which ensures extreme ventilation - Mesh fabric on the interior optimizes moisture management - Sleeve constructed with a reinforced fabric in the front panel for a precise and secure fit

Designed to be our most pedal-friendly protection, the Youth Enduro Knee Sleeve has you covered wherever the trail takes you. These sleeve-style guards are designed using a moisture-wicking micro-lycra material with a nylon mesh rear panel for increased airflow. The D3O knee inserts provide the perfect balance of comfort and protection as you get rowdy on the trail, and are removable so you can wash the sleeve itself. With silicon grip to hold the guards in place, these are great, minimal-feel knee guards for young rippers.

Slip-On Knee Guards Designed with D3O The Youth Launch D3O Knee Guard offers an excellent combination of impact-absorbing protection with a value-focused build for smaller riders. The CE-certified D3O insert works seamlessly with the slip-on design of the guard to provide all-day comfort and the confidence to try new trails. Features - D3O inserts - EN1621-1 Level 1 CE certification - Anatomically-shaped and asymmetrical shin guards provide pedal-friendly comfort - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability

Mountain biking has evolved considerably in recent years and bikes now offer access to every type of terrain and style of riding. So we have created the lightweight VPD Air Leg as an option for those riders who are looking for a minimal level of padding and reinforcement, but with the highest levels of comfort, compression, and ventilation. The VPD Air legs comfort pads have been pre-shaped to offer enhanced flexibility and freedom of movement, and the silicone strips at the top and bottom of the pads ensure a precise and secure fit even through rough riding conditions. The pads are lightweight, and, thanks to the perforated fabric designed to increase airflow, the legs offer optimized ventilation and moisture control. Ideal for long days on the bike or when you want some padding without any penalty. - Pre-shaped low-profile knee comfort pads - Reinforced fabric outside knee - Ventilated textile inside leg - Lightweight compression fabric for a secure and pressure-free fit - Silicone strip at the top and bottom to secure in place - Perforated for optimized moisture and ventilation control

Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - Strap across forearm on elbow guard keeps pads in place - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable

Leatt's soft-shell 3DF impact foam elbow pads just keep getting better and better. Leatt designed the 3DF 5.0 with a refined sleeve construction with the latest material tech to ensure that ventilation, fit, and anti-slip exceed your expectations and that great protection is a given. Additional features include an Aramid outer layer for durability and a pre-curved design for better fit and function. CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Elbow EN1621-1 - New 25% slimmer CE impact certified profile - New, wider, silicone printed, and elastic non-slip cuffs - Anti-odor MoistureCool and AirMesh wicking fabrics - All protection materials perforated for ventilation - Weight: 350g (pair)

Leatt's soft-shell 3DF impact foam elbow pads just keep getting better and better. Leatt designed the 3DF 5.0 with a refined sleeve construction with the latest material tech to ensure that ventilation, fit, and anti-slip exceed your expectations and that great protection is a given. Additional features include an Aramid outer layer for durability and a pre-curved design for better fit and function. It's CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Elbow EN1621-1 - New 25% slimmer CE impact-certified profile - New wider silicone printed and elastic non-slip cuffs - Anti-odor MoistureCool and AirMesh wicking fabrics - All protection materials are perforated for ventilation - Weight: 350g (pair)

The 3.0 EXT are extended hard-shell guards with 3DF impact foam that offers premium protection. The hard-shell design means there's no sock/sleeve; instead, a strap system allows for easy on/off and possible over-the-pant fit. It features a slimmer knee pad profile and an improved sliding surface, and offers a very nice fit with ergonomic left/right shapes. CE tested and certified protection that scores a total of 20 points in the Leatt protection rating system. - Hard-shell and 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Knee and shin EN1621-1 - Full shin extended length – EXT - New improved hard-shell sliding surface - 3D design for optimal fit with specific left and right sides - Slim shin plate that also fits inside boots - Weight: from 600g (1.32lbs) pair

Leatt's soft-shell 3DF impact foam knee pads just keep getting better and better. The Knee Guard 3DF 5.0 Junior has a totally new and refined sleeve construction with the latest material tech for riders who know that ventilation, fit and anti-slip are key and that great protection is a given. It features 3DF AirFit ventilated soft-impact foam, an abrasion-resistant Aramid outer layer for durability, and perforated materials for ventilation. CE tested and certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - New 25% slimmer CE impact certified profile - New increased side protection - New wider, silicone-printed elastic cuffs - New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved 3D design for better fit and function - Weight: 450g (pair)

The Knee Guard 3DF 5.0 Mini is now better than ever, designed for riders who know that ventilation, fit, and anti-slip are key and that, with Leatt, great protection is a given. It features 3DF AirFit ventilated soft-impact foam, an abrasion-resistant Aramid outer layer for durability, and perforated materials for ventilation. CE tested for certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Knee EN1621-1 - New 25% slimmer CE impact certified profile - New increased side protection - New wider, silicone-printed elastic cuffs - New 30mm low-profile elastic Velcro strap with easy-pull suede finger tabs - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved 3D design for better fit and function - Weight: 450g (pair)

- Our lightest ever knee pad with new revolutionary IPX soft gel protection - Lycra sock sleeve with IPX gel for maximum freedom-of-movement when riding - Perfect for day-long riding - Low bulk and easy to fold for storage in a pack when not in use - Ventilation hole in back of knee for added comfort - Certified to EN 1621-1 Level 1 - 76% TPE, 18% polyamide, 6% polyester

The SCOTT Soldier 2 Elbow Guards are our lightest elbow pads yet—perfect for those searching for amazing comfort without sacrificing protection. Our engineers have re-designed the standard malleable, shock-absorbing D3O material used by numerous competitors and paired this with abrasion resistant fabric to ensure an unmatched level of protection. The strapless construction with a silicone printed retention system combined with a highly breathable mesh material provide ultimate comfort. - Extra lightweight protection - Scott specifically designed ergonomic and flexible D3O pad with side extensions - Strapless construction with silicone printing retaining system - Stretch fabric sleeve main body with pre-curved chassis - Abrasion resistant front fabric - Stretchable and breathable fabric sleeve - Textile parts: 55% Polyamide, 42% Polyester,3% Elastane - Protective parts: 100% Polyurethane

The SCOTT Soldier 2 Knee Guards are our lightest knee pads yet—perfect for those searching for amazing comfort without sacrificing protection. Our engineers have re-designed the standard malleable, shock-absorbing D3O material used by numerous competitors and paired this with abrasion resistant fabric to ensure an unmatched level of protection. The strapless construction with a silicone printed retention system combined with a highly breathable mesh material provide ultimate comfort. - Extra lightweight protection - Scott specifically designed ergonomic and flexible D3O pad with side extensions - Strapless construction with silicone printing retaining system - Stretch fabric sleeve main body with pre-curved chassis - Abrasion resistant front fabric - Certification Level: Level 1 Of En1621-1 - Textile parts: 55% Polyamide, 42% Polyester,3% Elastane - Protective parts: 100% Polyurethane

- Constructed with Armortex a tough elastic fabric on the front panel of the pads that enhances durability - Slytech shock absorption foam intelligently and progressively adapts to different forces and impact speeds for thorough protection

Lightweight and flexible padding that is barely noticeable - ideal for riders who want complete freedom of movement and reliable protection. The VPD Air padding is both highly flexible and highly ventilated for optimal freedom of movement, comfort and temperature control. The pad is housed in reinforced stretch fabric that stays securely in place thanks to an inner lining of anti-slip neoprene and an elastic strap with velcro fastening. A low-profile design further supports practicality and comfort, enhancing the barely-there feel of the pads. - Lightweight and impact-absorbing VPD compound - Reinforced stretch fabric - Elastic strap for a comfortable fit - Neoprene anti-slip on the inside - Designed with a low profile

- Improved comfort temperature management and mobility - D3O T5 Evo X impact absorption that stays in place - Perforated neoprene enhances venting and moisture control - Woven upper elastic strap for personalized fit and lower arm neoprene comfort band

Minimal restrictions, maximized benefits. - D3O® inserts for world-leading impact protection - Moisture-wicking, open stretch mesh for breathability - Anti-microbial treatment reduces odor-causing bacteria - Abrasion resistant elbow panel for added coverage in a fall - Removable - D3O® inserts for easy washing - EN1621-1 Level 1 certified - 76% Nylon 24% Spandex Micro Lycra

Our Enduro Knee Sleeves are trail tuned and offer pedal-friendly protection on the trail. Made from a moisture-wicking micro-lycra material and featuring a nylon mess rear panel, they keep the air flowing as you pedal up and earn the down. They allow full range of motion, thanks again to that high-stretch rear panel, and keep your knees safe from hard trail knocks with the removable D3O elbow inserts that deliver both protection and comfort as you ride. - Moisture wicking micro-lycra sleeve with nylon mesh rear panel for increased airflow - Removable D3O knee inserts for the perfect balance of comfort and protection - Silicone grip top and bottom to hold the guard in place - Nylon, spandex micro lycra

- Constructed with Armortex a tough elastic fabric on the front panel of the pads that enhances durability - Slytech shock absorption foam intelligently and progressively adapts to different forces and impact speeds for thorough protection

- Integrated lateral hip protectors (EN 1621-1, level 1) - Protective padding on the outer thighs and on the coccyx - Comfortable waistband - Flat seams prevent chafing - Odour prevention: treated with Polygiene Odor Crunch - Machine washable - Integrated CHAMOIS PAD

With the Flow Evo+ elbow guard, iXS provides super thin, light and comfortable elbow protectors. Developed with mountain bike legend Hans Rey, the pads are super compact to fit any backpack. The integrated Xmatter padding concept provides high impact absorption and protection. With the Flow Evo+ iXS introduce product properties like exchangeable padding and structurally improved AeroMesh of the newest generation, offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - Aeromesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified

Our only non-slip on design, the FORTIS features a protective shell for abrasion resistance and Level 1 impact protection to stand up to all your particularly downhill riding needs. - Perforated neoprene chassis for breathability - Strategically placed perimeter embossed foam padding with ventilation - Dense forward-facing chassis for shield protection - Internal elastic flex joint maintains chassis compression during pedaling - Tacky silicone elastic webbing to prevent slippage - Hook-and-loop thigh and calf closures with security cinch - Pre-curved chassis for attack position - Fortified injection molded plastic shields - Impacted Tested with Level 1 Protection - CE EN 1621-1:2012 Level 1

The Flow light pads are the ideal option if you are looking for super thin, light and comfortable protectors. These pads are designed to be compact to fit in any backpack. The integrated Xmatter padding concept provides high impact absorption and protection, and the light weight mesh slip on sock concept adds a high level of comfort when pedaling and heat is your concern. The Flow light guards also allow you to remove the padding should you need to throw the sleeve in the wash or replace padding which has lost its structural integrity. - Removable Xmatter protective foam - Lycra mesh—light, moisture wicking, breathable, anti-bacterial - Silicone stopper - EN1621-1:2012 certified

The Hack Evo guards are our entry-level option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These knee guards are light and extremely comfortable to wear. - Qmatter, protective padding - Low friction impact shells to absorb and distribute impact - Silicone stopper - AeroMesh light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)

Leatt's soft-shell 3DF impact foam elbow pads just keep getting better and better. Now with a refined sleeve construction with the latest material tech, these pads offer ventilation, great fit, and anti-slip features, while providing premium protection. It's CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Elbow EN1621-1 - New anti-slip forearm X-strap with silicone bicep lining - Abrasion-resistant Aramid outer layer for durability - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved design for better fit and function - Silicone printed elbow grip - Weight: from 350g (0.77lbs) pair

Ultra-slim and soft-impact gel protector. A high-tech elbow protection in a minimalistic, comfortable fit with CE certification, this elbow guard has a lightweight construction which can flex and fit for premium comfort. The AirFlex impact gel is the latest technology in protection. Single sizing and silicone grip panels give you the famous Leatt non-slip fit. - New super-slim and lightweight AirFlex gel impact protection - Our 3D design ensures a great fit that is very comfortable - Premium comfort using MoistureCool and AirMesh wicking fabrics - Silicone lamination, non-slip cuffs to keep protector in place - Silicone printed, cupped elbow grip - Total Leatt protection score of 11 points - CE tested and certified as impact protection: Elbow EN1621-1 - Weight: from 240g (0.53lbs) pair

These great-value-for-the-money 3DF hip impact shorts offer the same comfort and features as Leatt's top models. Compression MoistureCool material with flatlock stitching and mesh ventilation ensure a comfortable fit and offer premium protection. They provide hip and thigh protection and score a total of 9 points in the Leatt protection rating system. Now you will return home with a smile on your face after every ride—even after a crash! - 3DF padding is CE tested and certified as impact protection: Hip EN1621-1 Level 1 - Extra-wide with comfortable waist stretch - Anti-odor MoistureCool and AirMesh wicking fabrics - Silicone-printed elastic leg cuffs - Pre-shaped 3D design for better fit and function

The SCOTT Grenade Evo Elbow Guards use a strap that allows the pad to stay in position without feeling too tight on your arm. The strategically positioned ergonomic straps paired with a breathable stretch mesh provide so much comfort that you'll forget you're wearing them. Our engineers re-designed the standard D3O pads used by numerous competitors to ensure an unmatched level of protection. - Level 1 protection standard - Scott specifically designed ergonomic and flexible D3O pad - Localized side padding - Abrasion resistant front panel - Certification level: Level 1 of EN1621-1 - Protective parts: 100% Polyurethane - Perforated neoprene construction with stretch mesh back panel - Ergonomic positioned straps - Removable pad - Textile parts: 55% Polyamide, 41% Polyester, 3% Elastane, 1% Aramid

Go-To Pedal-Friendly Knee Pads For Ce-Certified, All-Mountain Protection The Slayer Knee Pads set the standard for lightweight, pedal-friendly, and CE-certified knee-pad design. Featuring dual-density DK Impact foam and a durable Cordura outer, these pads maintain a breathable design that's light and comfortable enough for longer rides and hot weather. Their pre-curved shape and flexible foam design maintain a custom-fit feel, while silicon gripper cuffs ensure a slip-free fit. Integrated odor control helps fight the stink factor. - 1 Year Limited Warranty - Lightweight, low-profile CE-certified knee protector (EN 1621-1 Level 1) - Dual-density DK Impact energy-absorbing foam technology - Cordura abrasion resistance - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

- Adjustable hook and loop strap closure around the calf and silicone gripper on the upper thigh provide a secure fit. - Removable D3O LP1 foam pad provides certified impact protection. - Lycra front panel and mesh rear panel for comfort and breathability. - Abrasion-resistant knee cover for durability. - Silicone patch at shin combats slippage. - Unisex size range.

- Removable LITESHIELD PLUS back protector (EN 1621-2, level 2) - Protective EVA padding on the upper back and coccyx - Height-adjustable AIROFLEX hip belt with anti-stick Velcro - Odour prevention: treated with Polygiene Odor Crunch - Structured silicone coating on inner seams prevents slippage - Machine washable

Specifically designed with the growing Enduro scene in mind, the Indy Leg combines the unrestricted mobility of the Race Face Charge Leg with the additional impact protection of the T5 Evo. Second-skin Butterfly Mesh sleeve with targeted D30 high performance shock absorbing protective foam knee. Protection you can trust on rowdy descents built into a minimal sleeve for unlimited range of motion while climbing. - Lycra and butterfly mesh sleeve offers second skin fit - Targeted D30 high performance shock absorbing impact foam knee coverage - Woven elastic top strap with Velcro closure for personalized adjustment - Silicone gripper along inner top opening ensures "stay-put" fit - Silicone patch at shin eliminates slippage

Designed with valuable feedback from the 3-time EWS winner himself, the Sam Hill signature knee pads are the ultimate MTB knee pads for gravity riding, whatever your discipline. Light enough to be worn all day long, the Sam Hill knee pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. CE EN1621-1:2012 Level 2. - High length compression design to prevent pad from slipping - Extra padding surrounding main knee cap for increased protection and support - Silicone printed gripper on inside of cuffs - Silicone printed logo on top and bottom outside cuffs to grip silicone on to shorts - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - Weight 340g (size L)

Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable

- Body-mapped, impact-absorbing SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Ventilated SmartFlex hip pads allow airflow to keep wearer dry and comfortable - Moisture-wicking, UPF 50+ compression fabric - Side leg pocket - Machine washable - CE PPE II—15613 Impact Attenuation / 1621-1 coverage

Exceptional Level 1 Soft Impact Foam to Work Under Chest Protectors If you are looking for non-bulky shoulder protection to work in conjunction with a hardshell chest protector, look no further. The Shoulder Tee is designed to be used as a moisture-wicking base layer but has the benefit of CE Certified slimline soft impact foam in the shoulders that works with or without a Leatt Neck Brace. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Shoulder EN1621-1 - Our 3D design ensures a comfortable fit - Easy-to-wear compression sock design for maximum evaporation - Antiodor MoistureCool and AirMesh wicking fabrics - Easy to clean: hand wash - Weight: from 320g (0.71lbs)

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ iXS introduce product properties like exchangeable padding, structurally improved AeroMesh of newest generation offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Adult-sized